Nano-modified slag-based cementitious composites reinforced with basalt pellets and polyvinyl alcohol fibers

References

• Yang IH, Joh C, Kim BS. Structural behavior of ultra high-performance concrete beams subjected to bending. Eng Struct. 2010;32(11):3478–3487.
   Web of Science ®Google Scholar
• Bandelt MJ, Billington SL. Impact of reinforcement ratio and loading type on the deformation capacity of high-performance fiber-reinforced cementitious composites reinforced with mild steel. J Struct Eng. 2016;142(10):04016084.
   Web of Science ®Google Scholar
• Meng D, Huang T, Zhang YX, et al. Mechanical behaviour of a polyvinyl alcohol fibre reinforced engineered cementitious composite (PVA-ECC) using local ingredients. Constr Build Mater. 2017;141:259–270.
   Web of Science ®Google Scholar
• Pan Z, Wu C, Liu J, et al. Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC). Constr Build Mater. 2015;78:397–404.
   Web of Science ®Google Scholar
• Li VC, Wang S, Wu C. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC). ACI Mater J. 2001;98(6):483–492.
   Web of Science ®Google Scholar
• Ranade R, Li VC, Stults MD, et al. Micromechanics of high-strength, high-ductility concrete. ACI Mater J. 2013;110(4):375–384.
   Web of Science ®Google Scholar
• Li X, Wang J, Bao Y, et al. Cyclic behavior of damaged reinforced concrete columns repaired with high-performance fiber-reinforced cementitious composite. Eng Struct. 2017;136:26–35.
   Web of Science ®Google Scholar
• Yu J, Yao J, Lin X, et al. Tensile performance of sustainable strain-hardening cementitious composites with hybrid PVA and recycled PET fibers. Cem Concr Res. 2018;107:110–123.
   Web of Science ®Google Scholar
• Neville AM. Properties of concrete. London (UK): Prentice Hall; 2011.
   Google Scholar
• Ghazy A, Bassuoni MT, Maguire E, et al. Properties of fiber-reinforced mortars incorporating nano-silica. Fibers. 2016;4(1):6–22.
   Google Scholar
• Azzam A, Bassuoni MT, Shalaby A. Properties of high-volume fly ash and slag cementitious composites incorporating nanosilica and basalt fiber pellets. Adv Civ Eng Mater. 2019;8(3):255–274.
   Web of Science ®Google Scholar
• Kong D, Du X, Wei S, et al. Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials. Constr Build Mater. 2012;37:707–715.
   Web of Science ®Google Scholar
• Said AM, Zeidan MS, Bassuoni MT, et al. Properties of concrete incorporating nano-silica. Constr Build Mater. 2012;36:838–844.
   Web of Science ®Google Scholar
• Ghazy A, Bassuoni MT, Shalaby A. Nano-modified fly ash concrete: a repair option for concrete pavements. ACI Mater J. 2016;113(2):231–242.
   Web of Science ®Google Scholar
• Bentur A, Mindess S. Fibre reinforced cementitious composites. London (UK): CRC Press; 2006.
   Google Scholar
• Loh ZP, Mo KH, Tan CG, et al. Mechanical characteristics and flexural behaviour of fibre-reinforced cementitious composite containing PVA and basalt fibres. Sādhanā. 2019;44(4):1–9.
   Web of Science ®Google Scholar
• Özkan Ş, Demir F. The hybrid effects of PVA fiber and basalt fiber on mechanical performance of cost-effective hybrid cementitious composites. Constr Build Mater. 2020;263:120564.
   Web of Science ®Google Scholar
• Wang Z-B, Han S, Sun P, et al. Mechanical properties of polyvinyl alcohol-basalt hybrid fiber engineered cementitious composites with impact of elevated temperatures. J Cent South Univ. 2021;28(5):1459–1475.
   Web of Science ®Google Scholar
• Özkan Ş, Çoban ÖÖ. The hybrid effects of basalt and PVA fiber on properties of a cementitious composite: physical properties and non-destructive tests. Constr Build Mater. 2021;312:125292.
   Web of Science ®Google Scholar
• Wang Q, Yi Y, Ma G, et al. Hybrid effects of steel fibers, basalt fibers and calcium sulfate on mechanical performance of PVA-ECC containing high-volume fly ash. Cem Concr Compos. 2019;97:357–368.
   Web of Science ®Google Scholar
• Azzam A, Bassuoni MT, Shalaby A. Nanomodified cementitious composites incorporating basalt fiber pellets under tensile and impact loads. J Mater Civ Eng. 2021;33(10):04021260.
   Web of Science ®Google Scholar
• Ayub T, Shafiq N, Nuruddin MF. Mechanical properties of high-performance concrete reinforced with basalt fibers. Procedia Eng. 2014;77:131–139.
   Google Scholar
• Iyer P, Kenno SY, Das S. Mechanical properties of fiber-reinforced concrete made with basalt filament fibers. J Mater Civ Eng. 2015;27(11):04015015–04015018.
   Web of Science ®Google Scholar
• Iyer P, Kenno SY, Das S. Performance of fiber-reinforced concrete made with basalt-bundled fibers. Adv Civ Eng Mater. 2016;5(1):107–123.
   Google Scholar
• Jiang C, Fan K, Wu F, et al. Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete. Mater Des. 2014;58:187–193.
   Web of Science ®Google Scholar
• Mahmoud K, Ghazy A, Bassuoni MT, et al. Properties of nanomodified fiber-reinforced cementitious composites. J Mater Civ Eng. 2017;29(10):04017173.
   Web of Science ®Google Scholar
• Bediwy A, El-Salakawy EF. Mechanical properties of hybrid structures incorporating nano-silica and basalt fiber pellets. Civil Eng. 2021;2(4):909–928.
   Google Scholar
• CAN/CSA-A3001-18. Cementitious materials for use in concrete. Mississauga (ON): Canadian Standard Association; 2018.
   Google Scholar
• ASTM C494/C494M-17. Standard specification for chemical admixtures for concrete. West Conshohocken (PA): ASTM International; 2017.
   Google Scholar
• CSA-A23.1/A23.2-19. Concrete materials and methods of concrete construction/test methods and standard practices for concrete. Mississauga (ON): Canadian Standard Association; 2019.
   Google Scholar
• ASTM C230/C230M-20. Flow table for use in tests of hydraulic cement. West Conshohocken (PA): ASTM International; 2020.
   Google Scholar
• ASTM C231/C231M-17. Standard test method for air content of freshly mixed concrete by the pressure method. West Conshohocken (PA): ASTM International; 2017.
   Google Scholar
• ASTM C403/C403M-16. Standard test method for time of setting of concrete mixtures by penetration resistance. West Conshohocken (PA): ASTM International; 2016.
   Google Scholar
• ASTM C39/C39M-18. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken (PA): ASTM International; 2018.
   Google Scholar
• ASTM C1609/C1609M-19. Standard test method for flexural performance of fiber-reinforced concrete (using beam with third-point loading). West Conshohocken (PA): ASTM International; 2019.
   Google Scholar
• Ghazy A, Bassuoni MT, Shehata E, et al. Comparison of different approaches for determining the residual post-cracking strength index of fiber reinforced concrete for bridges. Can J Civ Eng. 2019;46(5):462–465.
   Web of Science ®Google Scholar
• ASTM C666/C666M-15. Standard test method for resistance of concrete to rapid freezing and thawing. West Conshohocken (PA): ASTM International; 2015.
   Google Scholar
• ASTM C215/C215M-19. Standard test method for fundamental transverse, longitudinal and torsional resonant, frequencies of concrete specimens. West Conshohocken (PA): ASTM International; 2019.
   Google Scholar
• Ramezanianpour AA. Cement replacement materials. New York (NY): Springer; 2014.
   Google Scholar
• Ondova M, Stevulova N, Meciarova L. The potential of higher share of fly ash as cement replacement in the concrete pavement. Procedia Eng. 2013;65:45–50.
   Google Scholar
• Zhang MH, Islam J, Peethamparan S. Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag. Cem Concr Compos. 2012;34(5):650–662.
   Web of Science ®Google Scholar
• Branston J, Das S, Kenno SY, et al. Mechanical behaviour of basalt fibre reinforced concrete. Constr Build Mater. 2016;124:878–886.
   Web of Science ®Google Scholar
• Li Q, Gao X, Xu S. Multiple effects of nano-SiO2 and hybrid fibers on properties of high toughness fiber reinforced cementitious composites with high-volume fly ash. Cem Concr Compos. 2016;72:201–212.
   Web of Science ®Google Scholar
• Liu SG, He C, Yan CW, et al. Water permeability of polyvinyl alcohol (PVA) fiber reinforced cementitious composites. Adv Mat Res. 2011;150:1009–1012.
   Google Scholar
• Toutanji H, Xu B, Gilbert J, et al. Fracture toughness model for poly (vinyl alcohol) fiber reinforced high-performance cementitious material. Proceedings of the 8th International Symposium on Utilization of High-Strength and High-Performance Concrete. Tokyo, Japan; 2008.
   Google Scholar
• Noushini A, Samali B, Vessalas K. Effect of polyvinyl alcohol (PVA) fibre on dynamic and material properties of fibre reinforced concrete. Constr Build Mater. 2013;49:374–383.
   Web of Science ®Google Scholar
• Thong CC, Teo DCL, Ng CK. Application of polyvinyl alcohol (PVA) in cement-based composite materials: a review of its engineering properties and microstructure behavior. Constr Build Mater. 2016;107:172–180.
   Web of Science ®Google Scholar
• Xu B, Toutanji HA, Lavin T, et al. Characterization of polyvinyl alcohol fiber reinforced organic aggregate cementitious materials. KEM. 2011;466:73–83.
   Google Scholar
• Detwiler R, Bhatty J, Bhattacharja S. Supplementary cementing materials for use in blended cements. Skokie (IL): Portland Cement Association; 1996.
   Google Scholar