Development of a large-scale torsional split Hopkinson tube for dynamic shear test of mortar material

References

• Yu X, Chen L, Fang Q, et al. A concrete constitutive model considering coupled effects of high temperature and high strain rate. Int J Impact Eng. 2017;101:66–77.
   Web of Science ®Google Scholar
• Kong XZ, Fang Q, Chen L, et al. A new material model for concrete subjected to intense dynamic loadings. Int J Impact Eng. 2018;120:60–78.
   Web of Science ®Google Scholar
• Ross TJ. Direct shear failure in reinforced concrete beams under impulsive loading. Stanford (CA): Stanford University; 1983.
   Google Scholar
• Klepaczko JR. On a very high rate sensitivity of concrete failure at high loading rates and impact. Brittle matrix composites 7 Sawston: Woodhead Publishing; 2003. p. 1–27.
   Google Scholar
• Thai DK, Kim SE. Failure analysis of UHPFRC panels subjected to aircraft engine model impact. Eng Fail Anal. 2015;57:88–104.
   Web of Science ®Google Scholar
• Millard SG, Molyneaux T, Barnett SJ, et al. Dynamic enhancement of blast-resistant ultra high performance fibre-reinforced concrete under flexural and shear loading. Int J Impact Eng. 2010;37(4):405–413.
   Web of Science ®Google Scholar
• Li QM, Reid SR, Wen HM, et al. Local impact effects of hard missiles on concrete targets. Int J Impact Eng. 2005;32(1–4):224–284.
   Web of Science ®Google Scholar
• Kong X, Fang Q, Wu H, et al. Numerical predictions of cratering and scabbing in concrete slabs subjected to projectile impact using a modified version of HJC material model. Int J Impact Eng. 2016;95:61–71.
   Web of Science ®Google Scholar
• Fang Q, Wu H. Concrete structures under projectile impact. Singapore: Springer; 2017. p. 255–321.
   Google Scholar
• Ghaboussi J, Millavec WA, Isenberg J. R/C structures under impulsive loading. J Struct Eng. 1984;110(3):505–522.
   Web of Science ®Google Scholar
• Zhang D, Yao S, Lu F, et al. Experimental study on scaling of RC beams under close-in blast loading. Eng Fail Anal. 2013;33:497–504.
   Web of Science ®Google Scholar
• Xu J, Wu C, Li ZX. Analysis of direct shear failure mode for RC slabs under external explosive loading. Int J Impact Eng. 2014;69:136–148.
   Web of Science ®Google Scholar
• Magnusson J, Hallgren M, Ansell A. Shear in concrete structures subjected to dynamic loads. Struct Concr. 2014;15(1):55–65.
   Web of Science ®Google Scholar
• Abdul-Rahman R, Saletti D, Forquin P. Experimental study of the static and dynamic behavior of pre-stressed concrete subjected to shear loading. Eng Struct. 2021;234:111865.
   Web of Science ®Google Scholar
• Davies J. Numerical study of punch-through shear specimen in mode II testing for cementitious materials. Int J Cement Compos Lightweight Concrete. 1988;10(1):3–14.
   Google Scholar
• Forquin P. Influence of free water and Strain-Rate on the shear behaviour of concrete. AMM. 2011;82:148–153.
   Google Scholar
• Ngo TT, Park JK, Pyo S, et al. Shear resistance of ultra-high-performance fiber-reinforced concrete. Constr Build Mater. 2017;151:246–257.
   Web of Science ®Google Scholar
• Ngo TT, Kim DJ, Moon JH, et al. Strain rate-dependent shear failure surfaces of ultra-high-performance fiber-reinforced concretes. Constr Build Mater. 2018;171:901–912.
   Web of Science ®Google Scholar
• Ngo TT, Kim DJ. Shear stress versus strain responses of ultra-high-performance fiber-reinforced concretes at high strain rates. Int J Impact Eng. 2018;111:187–198.
   Web of Science ®Google Scholar
• Ngo TT, Kim DJ. Synergy in shear response of ultra-high-performance hybrid-fiber-reinforced concrete at high strain rates. Compos Struct. 2018;195:276–287.
   Web of Science ®Google Scholar
• Zhang H, Hao CZ, Feng LX. Experimental and numerical analysis of shear fracture of concrete with different aggregates. J Exp Mech. 2007;6:581–587.
   Google Scholar
• Yu ZP, Huang Q, Li FR, et al. Research and verification of concrete shear multiaxial loading test technology. J Build Mater. 2020;023(002):460–465.
   Google Scholar
• Dowling AR, Harding J, Campbell JD. The dynamic punching of metals. J Inst Met. 1970;98:215–224.
   Google Scholar
• Harding J, Huddart J. The use of the double-notch shear test in determining the mechanical properties of uranium at very high rates of strain. In: Proceedings of 2nd Conference on the Mechanical Properties of Materials at High Rates of Strain, Oxford University, UK: Institute of Physics Conference Series, March 1979.
   Google Scholar
• Ge C, Yu QB, Zhang H, et al. On dynamic response and fracture-induced initiation characteristics of aluminum particle filled PTFE reactive material using hat-shaped specimens. Mater Des. 2020;188:108472.
   Web of Science ®Google Scholar
• Klepaczko JR. An experimental technique for shear testing at high and very high strain rates. The case of a mild steel. Int J Impact Eng. 1994;15(1):25–39.
   Web of Science ®Google Scholar
• Martin JS, Ross CA. Shear strength of concrete under dynamic loads, fluid-PVP. Struct Under Extreme Load Cond Fluid-Struct Interact Struct Mech Probl React. 1999;394:121–127.
   Google Scholar
• Baker WE, Yew CH. Strain-rate effects in the propagation of torsional plastic waves. J Appl Mech. 1966;33(4):917–923.
   Google Scholar
• Campbell JD, Dowling AR. The behaviour of materials subjected to dynamic incremental shear loading. J Mech Phys Solids. 1970;18(1):43–63.
   Web of Science ®Google Scholar
• Lewis JL, Campbell JD. The development and use of a torsional Hopkinson-bar apparatus. Exp Mech. 1972;12(11):520–524.
   Web of Science ®Google Scholar
• Eleiche AM, Campbell JD. Strain-rate effects during reverse torsional shear. Exp Mech. 1976;16(8):281–290.
   Web of Science ®Google Scholar
• Eleiche AM, Campbell JD. The influence of strain-rate history and temperature on the shear strength of copper, titanium and mild steel. Oxford: Oxford Univ Dept of Engineering Science; 1976.
   Google Scholar
• Khosravifard A, Moshksar MM, Ebrahimi R. High strain rate torsional testing of a high manganese steel: design and simulation. Mater Des. 2013;52:495–503.
   Web of Science ®Google Scholar
• Duffy J, Campbell JD, Hawley RH. On the use of a torsional split Hopkinson bar to study rate effects in 1100-0 aluminum. J Appl Mech. 1971;38(1):83–91.
   Google Scholar
• Frantz RA, Duffy J. The dynamic stress-strain behavior in torsion of 1100-0 aluminum subjected to a sharp increase in strain rate. J Appl Mech. 1972;39(4):939–945.
   Web of Science ®Google Scholar
• Hartley KA, Duffy J, Hawley RH. The torsional kolsky Split-Hopkinson bar. ASM Metals Hand. 1985;43:873–896.
   Google Scholar
• Senseny PE, Duffy J, Hawley RH. Experiments on strain rate history and temperature effects during the plastic deformation of close-packed metals. J Appl Mech. 1978;45(1):60–66.
   Web of Science ®Google Scholar
• Nie X, Prabhu R, Chen W, et al. A kolsky torsion bar technique for characterization of dynamic shear response of soft materials. Exp Mech. 2011;51(9):1527–1534.
   Web of Science ®Google Scholar
• Claus BJ, Nie X, Martin BE, et al. A side-impact torsion kolsky bar. Exp Mech. 2015;55(7):1367–1374.
   Web of Science ®Google Scholar
• Fang Q, Jiang XQ, Xiao GF, et al. Flywheel torsional split hopkinson bar. Chinese Patent: CN105181486B. 2018.
   Google Scholar
• Yu X, Chen L, Fang Q, et al. A review of the torsional split Hopkinson bar. Adv Civ Eng. 2018;9:2719741.1–2719741–17.
   Google Scholar
• Wang LL. Foundation of stress waves. Beijing, China: National Defense Industry Press; 2005.
   Google Scholar
• Chen WW, Song B. Split Hopkinson (kolsky) bar. Salmon Tower Building (NY): Springer US; 2011.
   Google Scholar
• Zhang RY. Experimental stress analysis. South Norwalk (CT): Mechanical Industry Press; 1990.
   Google Scholar
• Ramirez H, Rubio-Gonzalez C. Finite-element simulation of wave propagation and dispersion in Hopkinson bar test. Mater Des. 2006;27(1):36–44.
   Web of Science ®Google Scholar
• Song L, Hu SS. Two-wave and three-wave method in SHPB data processing. Explosion Shock Waves. 2005;04:368–373.
   Google Scholar
• Liu HW. Mechanics of materials. Beijing, China: Higher Education Press; 2017.
   Google Scholar
• Chen BF. Civil engineering materials. Beijing, China: China Building Industry Press; 2008.
   Google Scholar