238
Views
0
CrossRef citations to date
0
Altmetric
Technical Reports

Improving environmental efficiency of ultra-high-performance concrete (UHPC) through appropriate application of ultrafine quartz powder

, &

References

  • Larrard FD, Sedran T. Optimization of ultra-high-performance concrete by the use of a packing model. Cem Concr Res. 1994;24(6):997–1009.
  • Feng S, Lyu J, Xiao H, et al. Application of cellulose fibre in ultra-high-performance concrete to mitigate autogenous shrinkage. J Sustain Cem Based Mater. 2022:1–14.
  • Reda MM, Shrive NG, Gillott JE. Microstructural investigation of innovative UHPC. Cem Concr Res. 1999;29(3):323–329.
  • Richard P, Cheyrezy M. Composition of reactive powder concretes. Cem Concr Res. 1995;25(7):1501–1511.
  • Schießl P, Mazanec O, Lowke D. SCC and UHPC – effect of mixing technology on fresh concrete properties. Adv Constr Mater. 2007;2007:513–522.
  • Kim JE, Park WS, Yun SH, et al. Development of high performance concrete containing admixture in nuclear power plants. Appl. Mech. Mater. 2013;357-360:1062–1065.
  • Lampropoulos AP, Paschalis SA, Tsioulou OT, et al. Strengthening of reinforced concrete beams using ultra high performance fiber reinforced concrete (UHPFRC). Eng Struct. 2016;106:e370–e384.
  • John VM, Damineli BL, Quattrone M, et al. Fillers in cementitious materials – experience, recent advances and future potential. Cem Concr Res. 2018;114:65–e78.
  • Kim YJ, Wang J. Development of ultra-high-performance concrete with various silica admixtures. ACI Mater J. 2019.
  • Lee NK, Koh KT, Kim MO, et al. Uncovering the role of micro silica in hydration of ultra-high performance concrete (UHPC). Cem Concr Res. 2018;104:68–79.
  • 11. Abbas S, Nehdi L, Saleem M. Ultra-High performance concrete: mechanical performance, durability, sustainability and implementation challenges. Int J Concr Struct Mater. 2016;10(3):271e295–271e295.
  • Jiao Y, Zhang Y, Guo M, et al. Mechanical and fracture properties of ultra-high performance concrete (UHPC) containing waste glass sand as partial replacement material. J Clean Prod. 2020;277:123501.
  • Wang X, Yu R, Song Q, et al. Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density. Cem Concr Res. 2019;126:105921.
  • Mishra O, Singh SP. An overview of microstructural and material properties of ultra-high-performance concrete. J Sustain Cem Based Mater. 2019;8(2):97–143.
  • Flatt RJ, Roussel N, Cheeseman CR. Concrete: an eco material that needs to be improved. J Eur Ceram Soc. 2012;32(11):2787–2798.
  • Van Damme H. Concrete material science: past, present, and future innovations. Cem Concr Res. 2018;112:5–24.
  • Wang X, Yu R, Shui Z, et al. Development of a novel cleaner construction product: ultra-high performance concrete incorporating lead–zinc tailings. J Clean Prod. 2018;196(pt. 1–862):172–182.
  • Wang X, Yu R, Shui Z, et al. Mix design and characteristics evaluation of an eco-friendly ultra-high performance concrete incorporating recycled coral based materials. J Clean Prod. 2017;165(v.1):70–80.
  • Yang R, Yu R, Shui Z, et al. Low carbon design of an ultra-high performance concrete (UHPC) incorporating phosphorous slag. J Clean Prod. 2019;240:118157.
  • Zhang J, Zhao Y. The mechanical properties and microstructure of ultra-high-performance concrete containing various supplementary cementitious materials. J Sustain Cem Based Mater. 2017;6(4):254–266.
  • 21. Borges PHR, Fonseca LF, Nunes VA, et al. Andreasen particle packing method on the development of geopolymer concrete for civil engineering. J Mater Civ Eng. 2014;26(4):692–697.
  • Hüsken G, Brouwers HJH. A new mix design concept for earth-moist concrete: a theoretical and experimental study. Cem Concr Res. 2008;38(10):1246–1259.
  • Snehal K, Das BB. Application of Andreassen and modified Andreassen model on cementitious mixture design: a review. In: Lecture notes in civil engineering. Singapore: Springer; 2021.
  • Hemalatha T, Ramaswamy A. A review on fly ash characteristics – towards promoting high volume utilization in developing sustainable concrete. J Clean Prod. 2017;147:546–559.
  • Xu G, Shi X. Characteristics and applications of fly ash as a sustainable construction material: a state-of-the-art review. Resour Conserv Recycl. 2018;136:95–109.
  • Liu S, Wang Z, Li X. Long-term properties of concrete containing ground granulated blast furnace slag and steel slag. Mag Concr Res. 2014;66(21):1095–1103.
  • Skibsted J, Snellings R. Reactivity of supplementary cementitious materials (SCMs) in cement blends. Cem Concr Res. 2019;124:105799.
  • Li PP, Yu QL, Brouwers HJH, et al. Conceptual design and performance evaluation of two-stage ultra-low binder ultra-high performance concrete. Cem Concr Res. 2019b;125:105858.
  • Soliman NA, Tagnit-Hamou A. Using particle packing and statistical approach to optimize eco-efficient ultra-high-performance concrete. ACI Mater J. 2017;114:847–858.
  • Yu R, Spiesz P, Brouwers HJH. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC). Cem Concr Res. 2014;56:29–39.
  • Kwan AKH, Wong, HHC. Packing density of cementitious materials: part 2-packing and flow of OPC + PFA + CSF. Mater Struct. 2008;41(4):773–784.
  • Wong HHC, Kwan AKH. Packing density of cementitious materials: Part 1-measurement using a wet packing method. Mater Struct. 2008;41(4):689–701.
  • Ding M, Yu R, Feng Y, et al. Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content. Constr Build Mater. 2021;273:122023.
  • Fan DQ, Yu R, Shui ZH, et al. A new design approach of steel fibre reinforced ultra-high performance concrete composites: Experiments and modeling. Cem Concr Compos. 2020;110:103597.
  • Kang SH, Jeong Y, Tan KH, et al. The use of limestone to replace physical filler of quartz powder in UHPFRC. Cem Concr Compos. 2018;94:238–247.
  • Mo Z, Wang R, Gao X. Hydration and mechanical properties of UHPC matrix containing limestone and different levels of metakaolin. Constr Build Mater. 2020;256:119454.
  • Damineli BL, Kemeid FM, Aguiar PS, et al. Measuring the eco-efficiency of cement use. Cem Concr Compos. 2010;32(8):555–562.
  • Li LG, Zhuo HX, Zhu J, et al. Packing density of mortar containing polypropylene, carbon or basalt fibres under dry and wet conditions. Powder Technol. 2019a;342:433–440.
  • Wong V, Kwan AKH. A 3-parameter model for packing density prediction of ternary mixes of spherical particles. Powder Technol. 2014;268:357–367.
  • Metha PK, Monterio PJM. Concrete, microstructure. In: Properties and materials. London: McGraw-Hill; 2006.
  • Müller HS, Haist M, Vogel M. Assessment of the sustainability potential of concrete and concrete structures considering their environmental impact, performance and lifetime. Constr Build Mater. 2014;67:321–337.
  • 42. Chiaia B, Fantilli AP, Guerini A, et al. Eco-mechanical index for structural concrete. Constr Build Mater. 2014;67:386–392.
  • Vizcaíno-Andrés LM, Sánchez-Berriel S, Damas-Carrera S, et al. Industrial trial to produce a low clinker, low carbon cement. Mater Construct. 2015;65(317):e045.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.