Printability and pore structure of 3D printing low carbon concrete using recycled clay brick powder with various particle features

References

• Lim S, Buswell RA, Le TT, et al. Developments in construction-scale additive manufacturing processes. Autom Constr. 2012;21:262–268.
   Web of Science ®Google Scholar
• Ma G, Buswell R, Leal da Silva WR, et al. Technology readiness: a global snapshot of 3D concrete printing and the frontiers for development. Cem Concr Res. 2022;156:106774.
   Web of Science ®Google Scholar
• Wangler T, Pileggi R, Gürel S, et al. A chemical process engineering look at digital concrete processes: critical step design, inline mixing, and scaleup. Cem Concr Res. 2022;155:106782.
   Web of Science ®Google Scholar
• Schutter GD, Lesage K, Mechtcherine V, et al. Vision of 3D printing with concrete – technical, economic and environmental potentials. Cem Concr Res. 2018;112:25–36.
   Web of Science ®Google Scholar
• Wangler T, Lloret E, Reiter L, et al. Digital concrete: opportunities and challenges. RILEM Tech Lett. 2016;1:67–75.
   Google Scholar
• Batikha M, Jotangia R, Baaj MY, et al. 3D concrete printing for sustainable and economical construction: a comparative study. Autom Constr. 2022;134:104087.
   Web of Science ®Google Scholar
• Khan MS, Sanchez F, Zhou H. 3-D printing of concrete: beyond horizons. Cem Concr Res. 2020;133:106070.
   Web of Science ®Google Scholar
• Lim JH, Weng Y, Pham Q-C. 3D printing of curved concrete surfaces using adaptable membrane formwork. Constr Build Mater. 2020;232:117075.
   Web of Science ®Google Scholar
• Asprone D, Menna C, Bos FP, et al. Rethinking reinforcement for digital fabrication with concrete. Cem Concr Res. 2018;112:111–121.
   Web of Science ®Google Scholar
• Zhang C, Nerella VN, Krishna A, et al. Mix design concepts for 3D printable concrete: a review. Cem Concr Compos. 2021;122:104155.
   Web of Science ®Google Scholar
• Tran MV, Cu YTH, Le CVH. Rheology and shrinkage of concrete using polypropylene fiber for 3D concrete printing. J Build Eng. 2021;44:103400.
   Web of Science ®Google Scholar
• Liu X, Li Q, Li J. Shrinkage and mechanical properties optimization of spray-based 3D printed concrete by PVA fiber. Mater Lett. 2022;319:132253.
   Web of Science ®Google Scholar
• Rehman AU, Lee S-M, Kim J-H. Use of municipal solid waste incineration ash in 3D printable concrete. Process Saf Environ Prot. 2020;142:219–228.
   Web of Science ®Google Scholar
• Chen Y, Chaves Figueiredo S, Li Z, et al. Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture. Cem Concr Res. 2020;132:106040.
   Web of Science ®Google Scholar
• Hou S, Xiao J, Duan Z, et al. Fresh properties of 3D printed mortar with recycled powder. Constr Build Mater. 2021;309:125186.
   Web of Science ®Google Scholar
• Ferdous W, Manalo A, Siddique R, et al. Recycling of landfill wastes (tyres, plastics and glass) in construction – a review on global waste generation, performance, application and future opportunities. Resour Conserv Recycl. 2021;173:105745.
   Web of Science ®Google Scholar
• Siddika A, Mamun MA, Ferdous W, et al. 3D-printed concrete: applications, performance, and challenges. J Sustain Cem Based Mater. 2020;9(3):127–164.
   Web of Science ®Google Scholar
• Zhao Y, Gao J, Liu C, et al. The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement. J Clean Prod. 2020;242:118521.
   Web of Science ®Google Scholar
• Wu J-D, Guo L-P, Qin Y-Y. Preparation and characterization of ultra-high-strength and ultra-high-ductility cementitious composites incorporating waste clay brick powder. J Clean Prod. 2021;312:127813.
   Web of Science ®Google Scholar
• Liu Q, Li B, Xiao J, et al. Utilization potential of aerated concrete block powder and clay brick powder from C&D waste. Constr Build Mater. 2020;238:117721.
   Web of Science ®Google Scholar
• Shao J, Gao J, Zhao Y, et al. Study on the pozzolanic reaction of clay brick powder in blended cement pastes. Constr Build Mater. 2019;213:209–215.
   Web of Science ®Google Scholar
• Kruger J, Zeranka S, van Zijl G. An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete. Constr Build Mater. 2019;224:372–386.
   Web of Science ®Google Scholar
• Weng Y, Li M, Tan MJ, et al. Design 3D printing cementitious materials via fuller Thompson theory and Marson-Percy model. Constr Build Mater. 2018;163:600–610.
   Web of Science ®Google Scholar
• Haist M, Link J, Nicia D, et al. Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries. Mater Struct. 2020;53(4):1–26.
   Web of Science ®Google Scholar
• Chen M, Li L, Zheng Y, et al. Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials. Constr Build Mater. 2018;189:601–611.
   Web of Science ®Google Scholar
• GB/T17671-2021. Test method of cement mortar strength (ISO method); 2021.
   Google Scholar
• Zhang C, Jia Z, Wang X, et al. A two-phase design strategy based on the composite of mortar and coarse aggregate for 3D printable concrete with coarse aggregate. J. Build. Eng. 2022;54:104672.
   Web of Science ®Google Scholar
• Mantellato S, Palacios M, Flatt RJ. Reliable specific surface area measurements on anhydrous cements. Cem Concr Res. 2015;67:286–291.
   Web of Science ®Google Scholar
• Huang Q, Zhu X, Xiong G, et al. Recycling of crushed waste clay brick as aggregates in cement mortars: an approach from macro- and micro-scale investigation. Constr Build Mater. 2021;274:122068.
   Web of Science ®Google Scholar
• Zhang C, Hou Z, Chen C, et al. Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content. Cem Concr Compos. 2019;104:103406.
   Web of Science ®Google Scholar
• Zhang C, Deng Z, Chen C, et al. Predicting the static yield stress of 3D printable concrete based on flowability of paste and thickness of excess paste layer. Cem Concr Compos. 2022;129:104494.
   Web of Science ®Google Scholar
• Rahul AV, Santhanam M, Meena H, et al. Mechanical characterization of 3D printable concrete. Constr Build Mater. 2019;227:116710.
   Web of Science ®Google Scholar
• Keita E, Bessaies-Bey H, Zuo W, et al. Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin. Cem Concr Res. 2019;123:105787.
   Web of Science ®Google Scholar
• Kruger J, van Zijl G. A compendious review on lack-of-fusion in digital concrete fabrication. Addit Manuf. 2021;37:101654.
   Web of Science ®Google Scholar
• Yu S, Xia M, Sanjayan J, et al. Microstructural characterization of 3D printed concrete. J Build Eng. 2021;44:102948.
   Web of Science ®Google Scholar
• Zhang Y, Zhang Y, Liu G, et al. Fresh properties of a novel 3D printing concrete ink. Constr Build Mater. 2018;174:263–271.
   Web of Science ®Google Scholar