Quantification of volume change of AAC blocks for various environmental conditions

References

• Fudge CA. 2000. Developments with thin-joint AAC masonry in the UK. In: 12th International Brick and Block Masonry Conference, Madrid, Spain.
   Google Scholar
• Dhanasekar M, Porto F. 2009. Review of the progress in thin bed technology for masonry construction. In: 11th Canadian Masonry Symposium, Toronto, Ontario.
   Google Scholar
• Thamboo JA. Material characterisation of thin layer mortared clay masonry. Constr Build Mater. 2020;230:116932.
   Web of Science ®Google Scholar
• Thamboo JA, Dhanasekar M. A comparative study of the compression behaviour of thin layer mortared and conventional masonry. In: Valluzzi MR, da Porto F, Modena C, editors. Brick and Block Masonry: Trends, Innovations and Challenges-Proceedings of the 16th International Brick and Block Masonry Conference, IBMAC; 2016.
   Google Scholar
• Thamboo JA, Porto F. Review of the progress in thin bed technology for masonry construction. In: 11th Canadian Masonry Symposium, Toronto, Ontario; 2009.
   Google Scholar
• Thamboo JA, Dhanasekar M, Cheng Y. Characterisation of flexural bond strength in thin bed concrete masonry. In: 15th International Brick and Block Masonry Conference, Florianopolis, Brazil; 2012.
   Google Scholar
• Hamad A. Materials, production, properties and application of aerated lightweight concrete: review. Int J Mater Sci Eng. 2014; 2():152–157.
   Google Scholar
• Holt E, Raivio P. Use of gasification residues in aerated autoclaved concrete. Cem Concr Res. 2005;35(4):796–802.
   Web of Science ®Google Scholar
• Narayanan N, Ramamurthy K. Microstructural investigations on aerated concrete. Cem Concr Res. 2000;30(3):457–464.
   Web of Science ®Google Scholar
• Beltagui H, Sonebi M, Taylor S. The impact of mix design and materials on the microstructure of autoclaved aerated concrete. In: 37th Cement and Concrete Science Conference, CCS37; 2017.
   Google Scholar
• Schober G. Porosity in autoclaved aerated concrete (AAC): a review on pore structure, types of porosity, measurement methods and effects of porosity on properties. In: 5th International Conference on Autoclaved Aerated Concrete; 2011. p. 39–43.
   Google Scholar
• Schober G. The most important aspects of microstructure influencing strength of AAC. In: Limbachiya MC, Roberts JJ, editors. Autoclaved aerated concrete; 2005.
   Google Scholar
• Ramamurthy K, Narayanan N. Influence of composition and curing on drying shrinkage of aerated concrete. Mat Struct. 2000;33(4):243–250.
   Google Scholar
• Ramamurthy K, Narayanan N. Factors influencing the density and compressive strength of aerated concrete. Mag Concr Res. 2000;52(3):163–168.
   Web of Science ®Google Scholar
• Jan K, Gasiorowski AS. Mortar selection in design practice - description of the problems, solutions and requirements. Archit Civ Eng Environ. 2010;3:53–61.
   Google Scholar
• Al-Mudhaf H, Attiogbe E. Performance of autoclaved aerated-concrete masonry walls in Kuwait. Mat Struct. 1996;29(7):448–452.
   Google Scholar
• Jerman M, Keppert M, Výborný J, et al. Hygric, thermal and durability properties of autoclaved aerated concrete. Constr Build Mater. 2013;41:352–359.
   Web of Science ®Google Scholar
• Huang Z, Yuan Y, Wen Z. High performance thin-bed dry-mix mortar for autoclaved aerated concrete blocks. Advanced materials research. Vol. 250–253; Trans Tech Publications, Ltd. May 2011. p. 540–547.
   Google Scholar
• Thomas E, Sousa H, Roman H, et al. 2014. Defects in masonry walls guidance on cracking: identification, prevention and repair. New Delhi: International Council for Research and Innovation in Building and Construction.
   Google Scholar
• BIS (Bureau of Indian Standards). 1984. Handbook on causes and prevention of cracks in buildings. BIS SP-25, Manak Bhavan, New Delhi.
   Google Scholar
• Lamour V, Haouas A, Moranville M, et al. 2004. A new technique for characterisation of early-age cracking of mortars. In: International RILEM Symposium on Concrete Science and Engineering: A Tribute to Arnon Bentur.
   Google Scholar
• Toledo Filho RD, Ghavami K, Sanjuán MA, et al. Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres. Cem Concr Compos. 2005;27(5):537–546.
   Web of Science ®Google Scholar
• Uygunoğlu T, Topçu İ. The role of scrap rubber particles on the drying shrinkage and mechanical properties of self-consolidating mortars. Constr Build Mater. 2010;24(7):1141–1150.
   Web of Science ®Google Scholar
• Sirtoli D, Wyrzykowski M, Riva P, et al. Autogenous and drying shrinkage of mortars based on Portland and calcium sulphoaluminate cements. Mater Struct. 2020;53(5): 126.
   PubMed Web of Science ®Google Scholar
• Cebeci O, Al-Noury S, Mirza W. Strength and drying shrinkage of masonry mortars in various temperature-humidity environments. Cem Concr Res. 1989;19(1):53–62.
   Web of Science ®Google Scholar
• Zhang W, Zakaria M, Hama Y. Influence of aggregate materials characteristics on the drying shrinkage properties of mortar and concrete. Constr Build Mater. 2013;49:500–510.
   Web of Science ®Google Scholar
• Li Z, Liu J, Xiao J, et al. Drying shrinkage of mortar manufactured with recycled fine aggregate at vary initial saturation degree. Constr Build Mater. 2020;264:120621.
   Web of Science ®Google Scholar
• Maltese C, Pistolesi C, Lolli A, et al. Combined effect of expansive and shrinkage reducing admixtures to obtain stable and durable mortars. Cem Concr Res. 2005;35(12):2244–2251.
   Web of Science ®Google Scholar
• Gottfredsen F, Knutsson H, Nielsen A. Determination of length changes due to moisture variations in autoclaved aerated concrete. Mat Struct. 1997;30(3):148–153.
   Google Scholar
• Trong LN, Asamoto S, Matsui K. Microstructure and shrinkage behavior of autoclaved aerated concrete(AAC) - comparison of Vietnamese and Japanese AACs. J Adv Concr Technol. 2018;16(8):333–342.
   Web of Science ®Google Scholar
• Matsui K, Asamoto S, Ogawa A. Length change characteristics of autoclaved aerated concrete and other porous media based on pore structure. ce/papers. 2018;2(4):147–153.
   Google Scholar
• Rzeczkowski P, Lohaus L. Testing boundary conditions determining the drying shrinkage behavior of AAC. ce/papers. 2018;2(4):581–587.
   Google Scholar
• Trong LN, Asamoto S, Matsui K. Sorption isotherm and length change behavior of autoclaved aerated concrete. Cem Concr Compos. 2018;94:136–144.
   Web of Science ®Google Scholar
• Rawal R, Maithel S, Shukla Y, et al. Thermal performance of walling material and wall technology, part-1: National Database of Thermophysical Properties of Walling Materials, New Delhi:BIS. 2020.
   Google Scholar
• BIS (Bureau of Indian Standards). 2185 part 1. 2005. Concrete masonry units specification. Manak Bhavan, New Delhi.
   Google Scholar
• Al‐Adeeb A, Al‐Mudhaf H. Performance of masonry walls: case study in Kuwait. J Mater Civ Eng. 1992;4(1):77–90.
   Google Scholar