Flexural strength of ultra-high performance concrete beams with stainless steel wire mesh: experimental and finite element analysis

References

• Lin HS. Study on the effectiveness of anti-crack reinforcement network for highway tunnel lining. Transp Sci Technol. 2019;06:43–47.
   Google Scholar
• Kodur VKR, Bhatt PP, Soroushian P, et al. Temperature and stress development in ultra-high performance concrete during curing. Constr Build Mater. 2016;122:63–71.
   Web of Science ®Google Scholar
• Saleh S, Li YL, Hamed E, et al. Workability, strength, and shrinkage of ultra-high-performance seawater, sea sand concrete with different OPC replacement ratios. J Sustain Cem-Based Mater. 2023;12(3):271–291. doi: 10.1080/21650373.2022.2050831.
   Web of Science ®Google Scholar
• Mishra O, Singh SP. An overview of microstructural and material properties of ultra-high-performance concrete. J Sustain Cem-Based Mater. 2019;8(2):97–143. doi: 10.1080/21650373.2018.1564398.
   Web of Science ®Google Scholar
• Aghdasi P, Ostertag CP. Green ultra-high performance fiber-reinforced concrete (G-UHP-FRC). Constr Build Mater. 2018;190:246–254. doi: 10.1016/j.conbuildmat.2018.09.111.
   Web of Science ®Google Scholar
• Chen BC, Yang J, Wu XG, et al. Multi-index classification of mechanical properties of UHPC. China J Highw Transp. 2021;34–08:23–34.
   Google Scholar
• Hassan AMT, Jones SW, Mahmud GH. Experimental test methods to determine the uniaxial tensile and compressive behavior of ultra-high performance fiber reinforced concrete (UHPFRC). Constr Build Mater. 2012;37:874–882. doi: 10.1016/j.conbuildmat.2012.04.030.
   Web of Science ®Google Scholar
• Wille K, Kim DJ, Naaman AE. Strain-hardening UHPFRC with low fiber contents. Mater Struct. 2011;44(3):583–598. doi: 10.1617/s11527-010-9650-4.
   Web of Science ®Google Scholar
• Li Y, Pimienta P, Pinoteau N, et al. Effect of aggregate size and inclusion of polypropylene and steel fibers on explosive spalling and pore pressure in ultra-high-performance concrete (UHPC) at elevated temperature. Cem Concr Compos. 2019;99:62–71. doi: 10.1016/j.cemconcomp.2019.02.016.
   Web of Science ®Google Scholar
• Geiker M, Danner T, Michel A, et al. 25 Years of field exposure of pre-cracked concrete beams; combined impact of spacers and cracks on reinforcement corrosion. Constr Build Mater. 2021;286:122801. doi: 10.1016/j.conbuildmat.2021.122801.
   Web of Science ®Google Scholar
• Ong KCG, Paramasivam P, Lim CTE. Flexural strengthening of reinforced concrete beams using ferrocement laminate. J Ferrocement. 1992;2(24):331–342.
   Google Scholar
• Arif M, Pankaj  , Kaushik SK. Mechanical behaviour of ferrocement composites: an experimental investigation. Cem Concr Compos. 1999, 21(4): 301–312. doi: 10.1016/S0958-9465(99)00011-6.
   Web of Science ®Google Scholar
• Xiong GJ, Zhu ZX. Flexural properties of concrete beams reinforced with steel mesh (low content) reinforced mortar. Build Struct. 2007;37(S1):336–337. +342.
   Google Scholar
• Wu XY, Li FF. Axial compression resistance of concrete cylinder reinforced with steel wire mesh mortar. Eng Mech. 2011;28(01):131–137.
   Google Scholar
• Xiang R. Experimental study on crack resistance of steel mesh mortar reinforced concrete slabs. Shantou, Guangdong Province, China: Shantou University; 2010.
   Google Scholar
• Shi XF, Xu ZQ, Gao Y, et al. Anchorage performance of straight rebars in UHPC with strain-hardening property. J Sustain Cem-Based Mater. 2023;12(7):871–892. doi: 10.1080/21650373.2022.2125455.
   Web of Science ®Google Scholar
• Antunes GR, Ângela BM. Flexural tensile strength in mortar coating reinforced with different types of metal mesh: a statistical comparison. Constr Build Mater. 2016;121:559–568. doi: 10.1016/j.conbuildmat.2016.06.033.
   Web of Science ®Google Scholar
• Ge ZS, Huang XM, Xu GG. Evaluation of low temperature cracking resistance of asphalt mixtures by flexural strain energy method. J Southeast Univ (Natural Science Edition). 2002;04:653–655.
   Google Scholar
• Liu H, Fu Z, Liu YH. Experimental study on toughness of pavement fiber reinforced concrete. China J Highw Transp. 2012;02:33–39.
   Google Scholar
• Shi ZC, Su QT, Shao CY, et al. Evaluation method of basic mechanical properties and flexural toughness of coarse aggregate UHPC. China Civil Eng J. 2020;53–12:86–97.
   Google Scholar
• Shao XD, Li FY, Qiu MH, et al. Influence of steel fiber properties on axial and flexural performance of UHPC. China J Highw Transp. 2020;33–04:51–64.
   Google Scholar
• Li XJ, Han S, Jia ZQ, et al. Study on crack resistance of asphalt mixture at low temperature based on bending test. J Shandong Univ (Eng Sci). 2010;40–06:88–93.
   Google Scholar
• Mohamed M, Li VC. Flexural/tensile-strength ratio in engineered cementitious composites. J Mater Civ Eng. 1994;6(4):513–528.
   Web of Science ®Google Scholar
• Irassar EF. Sulfate resistance of blended cement: prediction and relation with flexural strength. Cem Concr Res. 1990;20(2):209–218.
   Web of Science ®Google Scholar
• Lin XS. Numerical simulation of blast responses of ultra-high performance fiber reinforced concrete panels with strain-rate effect. Constr Build Mater. 2018;176:371–382.
   Web of Science ®Google Scholar
• Singh M, Sheikh AH, Ali MM, et al. Experimental and numerical study of the flexural behavior of ultra-high performance fiber reinforced concrete beams. Constr Build Mater. 2017;138:12–25.
   Web of Science ®Google Scholar
• Mao L, Barnett S, Begg D, et al. Numerical simulation of ultra-high performance fiber reinforced concrete panel subjected to blast loading. Int J Impact Eng. 2014;64:91–100.
   Web of Science ®Google Scholar
• Zhang BS, Yu JJ, Chen WZ, et al. Failure evolution and fiber toughing mechanism of ultra-high performance concrete under uniaxial compression. J Sustain Cem-Based Mater. 2023;12(4):441–459.
   Web of Science ®Google Scholar
• Dadmand B, Sadaghian H, Khalilzadehtabrizi S, et al. Studying the compressive, tensile and flexural properties of binary and ternary fiber-reinforced UHPC using experimental, numerical and multi-target digital image correlation methods. Case Stud Constr Mater. 2023;18:e01865. doi: 10.1016/j.cscm.2023.e01865.
   Google Scholar
• Magallanes JM, Wu Y, Morrill KB, et al. Feasibility studies of a plasticity-based constitutive model for ultra-high performance fiber-reinforced concrete. For MABS. 2010;21:3–8.
   Google Scholar
• Parker DF. The role of saint venant’s solutions in rod and beam theories. Trans ASME J Appl Mech. 1979;46(4):861–866. doi: 10.1115/1.3424668.
   Web of Science ®Google Scholar
• Horgan CO, Knowles JK. Recent developments concerning saint-venant’s principle. Adv Appl Mech. 1983;23:179–269.
   Web of Science ®Google Scholar
• Akanda MAS, Ahmed SR, Uddin MW. Stress analysis of gear teeth using displacement potential function and finite differences. Int J Numer Meth Engng. 2002;53(7):1629–1640. doi: 10.1002/nme.355.
   Web of Science ®Google Scholar
• Ahmed SR, Hossain MZ, Uddin MW. A general mathematical formulation for finite- difference solution of mixed-boundary-value problems of anisotropic materials. Comput Struct. 2005;83(1):35–51.
   Web of Science ®Google Scholar
• Ahmed SR, Nath SD, Uddin MW. Optimum shapes of tire-treads for avoiding lateral slippage between tires and roads. Int J Numer Methods Eng. 2005;64(6):729–750.
   Web of Science ®Google Scholar
• del Coz Díaz JJ, Nieto PJ, Fresno DC, et al. Non-linear analysis of cable networks by FEM and experimental validation. Int J Comput Math. 2009;86(2):301–313. doi: 10.1080/00207160801965339.
   Web of Science ®Google Scholar
• Wang M, Chen P, Liu YF, et al. Numerical analysis of tensile behavior of high-strength steel wire braided gratings. J Southwest Jiaotong Univ. 2022;03:1–8.
   Google Scholar
• Nath SKD, Afsar AM, Ahmed SR. Displacement potential solution of a deep stiffened cantilever beam of orthotropic composite material. J Strain Anal Eng. 2007;42(7):529–540. doi: 10.1243/03093247JSA266.
   Web of Science ®Google Scholar
• Nath SKD, Ahmed SR. Displacement potential solution of stiffened composite struts subjected to eccentric loading. Appl Math Modell. 2009;33(3):1761–1775.
   Web of Science ®Google Scholar
• Nath SKD, Ahmed SR. A displacement potential-based numerical solution for orthotropic composite panels under end moment and shear loading. JOMMS. 2009;4(6):987–1004. doi: 10.2140/jomms.2009.4.987.
   Google Scholar
• Timoshenko SP, Goodier VN. Theory of elasticity. 3rd ed. New York (NY): McGraw Hill; 1979.
   Google Scholar
• Ekkehard F, Schmidt M, Stürwald S. Ultra-high performance concrete: (UHPC). Proceedings of the Second International Symposium on Ultra-High Performance Concrete; Kassel: Germany; 2008. p. 10.
   Google Scholar
• Yang J, Fang Z, Yang J. Flexural behavior of ultra-high performance concrete T beams with CFRP prestressed bars. J China Rail Soc. 2009;31–02:94–103.
   Google Scholar
• Zhu YP, Zhang Y, Hussein HH, et al. Numerical modeling for damaged reinforced concrete slab strengthened by ultra-high performance concrete (UHPC) layer. Eng Struct. 2020;209:110031. doi: 10.1016/j.engstruct.2019.110031.
   Web of Science ®Google Scholar
• Manual, Abaqus User, Abaqus user manual, Abaqus; 2020.
   Google Scholar
• Niu Y, Wei J, Jiao C. Crack propagation behavior of ultra-high-performance concrete (UHPC) reinforced with hybrid steel fibers under flexural loading. Constr Build Mater. 2021;294(10):123510. doi: 10.1016/j.conbuildmat.2021.123510.
   Google Scholar
• Wu GJ, Wu SY, Ma EW. Application of in-situ utilization technology of crushed and petrochemical on old cement concrete pavement. Road Mach Const Mech. 2011;28–06:64–66 + 69.
   Google Scholar
• Ying L, Peng Y, Kamel MM. 3‐D base force element method on meso‐damage analysis for recycled concrete. Struct Concr. 2022;23(4):1962–1980. doi: 10.1002/suco.202000125.
   Web of Science ®Google Scholar
• Park R. Evaluation of ductility of structures and structural assemblages from laboratory testing. BNZSEE. 1989;22(3):155–166. doi: 10.5459/bnzsee.22.3.155-166.
   Google Scholar
• Shi F, Yin S, Pham TM, et al. Pullout and flexural performance of silane groups and hydrophilic groups grafted polypropylene fiber reinforced UHPC. Constr Build Mater. 2021;277:122335. doi: 10.1016/j.conbuildmat.2021.122335.
   Web of Science ®Google Scholar