Synthesis of thin films with highly tailored microstructures

References

• Izadi E, Rajagopalan J. Texture dependent strain rate sensitivity of ultrafine-grained aluminum films. Scr Mater. 2016;114:65–69. doi: 10.1016/j.scriptamat.2015.12.003
   Web of Science ®Google Scholar
• Vopsaroiu M, Fernandez GV, Thwaites MJ, et al. Deposition of polycrystalline thin films with controlled grain size. J Phys D Appl Phys. 2005;38:490–496. doi: 10.1088/0022-3727/38/3/022
   Web of Science ®Google Scholar
• Thompson CV. Structure evolution during processing of polycrystalline films. Annu Rev Mater Sci. 2000;30:159–190. doi: 10.1146/annurev.matsci.30.1.159
   Web of Science ®Google Scholar
• Petrov I, Barna PB, Hultman L, et al. Microstructural evolution during film growth. J Vac Sci Technol A Vac Surf Films. 2003;21:S117. doi: 10.1116/1.1601610
   Web of Science ®Google Scholar
• Buijnsters JG, Celis J-P, Hendrikx RWA, et al. Metallic seed nanolayers for enhanced nucleation of nanocrystalline diamond thin films. J Phys Chem C. 2013;117:23322–23332. doi: 10.1021/jp4071482
   Web of Science ®Google Scholar
• Harp GR, Parkin SSP. Seeded epitaxy of metals by sputter deposition. Appl Phys Lett. 1994;65:3063–3065. doi: 10.1063/1.112507
   Web of Science ®Google Scholar
• Miller KT, Lange FF. Highly oriented thin films of cubic zirconia on sapphire through grain growth seeding. JMater Res. 1991;6:2387–2392. doi: 10.1557/JMR.1991.2387
   Web of Science ®Google Scholar
• Thompson CV. Grain growth in thin films. Annu Rev Mater Sci. 1990;20:245–268. doi: 10.1146/annurev.ms.20.080190.001333
   Web of Science ®Google Scholar
• Wu X, Jiang P, Chen L, et al. Extraordinary strain hardening by gradient structure. PNAS. 2014;111:7197–7201. doi: 10.1073/pnas.1324069111
   PubMed Web of Science ®Google Scholar
• Rajagopalan J, Han JH, Saif MTA. Bauschinger effect in unpassivated freestanding nanoscale metal films. Scr Mater. 2008;59:734–737. doi: 10.1016/j.scriptamat.2008.06.010
   Web of Science ®Google Scholar
• Rajagopalan J, Han JH, Saif MTA. Plastic deformation recovery in freestanding nanocrystalline aluminum and gold thin films. Science. 2007;315:1831–1834. doi: 10.1126/science.1137580
   PubMed Web of Science ®Google Scholar
• Lee D, Zhao B, Perim E, et al. Crystallization behavior upon heating and cooling in Cu 50 Zr 50 metallic glass thin films. Acta Mater. 2016;121:68–77. doi: 10.1016/j.actamat.2016.08.076
   Web of Science ®Google Scholar
• Greer AL. Crystallization of amorphous alloys. Metall Mater Trans A. 1996;27:549–555. doi: 10.1007/BF02648945
   Web of Science ®Google Scholar
• Easton M, StJohn D. Grain refinement of aluminum alloys: part I. The nucleant and solute paradigms—a review of the literature. Metall Mater Trans A. 1999;30:1613–1623. doi: 10.1007/s11661-999-0098-5
   Web of Science ®Google Scholar
• Easton M, StJohn D. Grain refinement of aluminum alloys: part II. Confirmation of, and a mechanism for, the solute paradigm. Metall Mater Trans A. 1999;30:1625–1633. doi: 10.1007/s11661-999-0099-4
   Web of Science ®Google Scholar
• Mullins WW. The effect of thermal grooving on grain boundary motion. Acta Metall. 1958;6:414–427. doi: 10.1016/0001-6160(58)90020-8
   Google Scholar
• Wong CC, Smith HI, Thompson CV. Surface-energy-driven secondary grain growth in thin Au films. Appl Phys Lett. 1986;48:335–337. doi: 10.1063/1.96543
   Web of Science ®Google Scholar
• Vitos L, Ruban AV, Skriver HL, et al. The surface energy of metals. Surf Sci. 1998;411:186–202. doi: 10.1016/S0039-6028(98)00363-X
   Web of Science ®Google Scholar
• Yamaguchi M, Inui H, Ito K. High-temperature structural intermetallics. Acta Mater. 2000;48:307–322. doi: 10.1016/S1359-6454(99)00301-8
   Web of Science ®Google Scholar
• Fu Y, Du H, Huang W, et al. TiNi-based thin films in MEMS applications: a review. Sens Actuators A Phys. 2004;112:395–408. doi: 10.1016/j.sna.2004.02.019
   Web of Science ®Google Scholar
• Sarkar R, Ebner C, Izadi E, et al. Revealing anelasticity and structural rearrangements in nanoscale metallic glass films using in situ TEM diffraction. Mater Res Lett. 2017;5:135–143.
   PubMed Web of Science ®Google Scholar
• Chu JP, Lai YW, Lin TN, et al. Deposition and characterization of TiNi-base thin films by sputtering. Mat Sci Eng A. 2000;277:11–17. doi: 10.1016/S0921-5093(99)00560-2
   Web of Science ®Google Scholar
• Chu JP, Jang JSC, Huang JC, et al. Thin film metallic glasses: unique properties and potential applications. Thin Solid Films. 2012;520:5097–5122. doi: 10.1016/j.tsf.2012.03.092
   Web of Science ®Google Scholar
• El Khakani MAE, Chaker M, Jean A, et al. Hardness and Young’s modulus of amorphous a-SiC thin films determined by nanoindentation and bulge tests. J Mater Res. 1994;9:96–103. doi: 10.1557/JMR.1994.0096
   Web of Science ®Google Scholar
• Rincón C, Romero J, Esteve J, et al. Effects of carbon incorporation in tungsten carbide films deposited by r.f. magnetron sputtering: single layers and multilayers. Surf Coat Technol. 2003;163-164:386–391. doi: 10.1016/S0257-8972(02)00635-7
   Web of Science ®Google Scholar
• Greene LE, Law M, Tan DH, et al. General route to vertical ZnO nanowire arrays using textured ZnO seeds. Nano Lett. 2005;5:1231–1236. doi: 10.1021/nl050788p
   PubMed Web of Science ®Google Scholar