Achieving fully-equiaxed fine β-grains in titanium alloy produced by additive manufacturing

References

• DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018;92:112–224.
   Web of Science ®Google Scholar
• Herzog D, Seyda V, Wycisk E, et al. Additive manufacturing of metals. Acta Mater. 2016;117:371–392.
   Web of Science ®Google Scholar
• Martin JH, Yahata BD, Hundley JM, et al. 3D printing of high-strength aluminium alloys. Nature. 2017;549:365–369.
   PubMed Web of Science ®Google Scholar
• Panwisawas C, Tang YT, Reed RC. Metal 3D printing as a disruptive technology for superalloys. Nat Commun. 2020;11:2327.
   PubMed Web of Science ®Google Scholar
• Zhang T, Huang Z, Yang T, et al. In situ design of advanced titanium alloy with concentration modulations by additive manufacturing. Science. 2021;374:478–482.
   PubMed Web of Science ®Google Scholar
• Zhang D, Qiu D, Gibson MA, et al. Additive manufacturing of ultrafine-grained high-strength titanium alloys. Nature. 2019;576:91–95.
   PubMed Web of Science ®Google Scholar
• Todaro CJ, Easton MA, Qiu D, et al. Grain structure control during metal 3D printing by high-intensity ultrasound. Nat Commun. 2020;11:142.
   PubMed Web of Science ®Google Scholar
• Barriobero-Vila P, Gussone J, Stark A, et al. Peritectic titanium alloys for 3D printing. Nat Commun. 2018;9:3426.
   PubMed Web of Science ®Google Scholar
• Carroll BE, Palmer TA, Beese AM, et al. Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing. Acta Mater. 2015;87:309–320.
   Web of Science ®Google Scholar
• Kok Y, Tan XP, Wang P, et al. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des. 2018;139:565–586.
   Web of Science ®Google Scholar
• Ren YM, Lin X, Guo PF, et al. Low cycle fatigue properties of Ti-6Al-4V alloy fabricated by high-power laser directed energy deposition: experimental and prediction. Int J Fatigue. 2019;127:58–73.
   Web of Science ®Google Scholar
• Sterling A, Torries B, Shamsaei N, et al. Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V. Mater Sci Eng A. 2016;655:100–112.
   Web of Science ®Google Scholar
• Sterling A, Shamsaei N, Torries B, et al. Fatigue behaviour of additively manufactured Ti-6Al-4V. Procedia Eng. 2015;133:576–589.
   Google Scholar
• Zhang ZB, Hao YL, Li SJ, et al. Fatigue behavior of ultrafine-grained Ti–24Nb–4Zr–8Sn multifunctional biomedical titanium alloy. Mater Sci Eng A. 2013;577:225–233.
   Web of Science ®Google Scholar
• Saitova LR, Höppel HW, Göken M, et al. Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use. Int J Fatigue. 2009;31:322–331.
   Web of Science ®Google Scholar
• Chao Q, Mateti S, Hodgson PD, et al. Nanoparticle-mediated ultra grain refinement and reinforcement in additively manufactured titanium alloys. Addit Manuf. 2021;46:102173.
   Web of Science ®Google Scholar
• Tian X, Zhu Y, Zhang K, et al. Isotropic and improved tensile properties of Ti-6Al-4V achieved by in-situ rolling in direct energy deposition. Addit Manuf. 2021;46:102151.
   Web of Science ®Google Scholar
• Zhang G, Lu X, Lin X, et al. In-situ grain structure control in directed energy deposition of Ti6Al4V. Addit Manuf. 2022;55:102865.
   Web of Science ®Google Scholar
• StJohn DH, Qian M, Easton MA, et al. The interdependence theory: the relationship between grain formation and nucleant selection. Acta Mater. 2011;59:4907–4921.
   Web of Science ®Google Scholar
• Easton MA, StJohn DH. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles. Acta Mater. 2001;49:1867–1878.
   Web of Science ®Google Scholar
• Xue A, Lin X, Wang L, et al. Influence of trace boron addition on microstructure, tensile properties and their anisotropy of Ti6Al4V fabricated by laser directed energy deposition. Mater Des. 2019;181:107943.
   Web of Science ®Google Scholar
• Bermingham MJ, Kent D, Zhan H, et al. Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions. Acta Mater. 2015;91:289–303.
   Web of Science ®Google Scholar
• Singh G, Ramamurty U. Reprint: boron modified titanium alloys. Prog Mater Sci. 2021;120:100815.
   Web of Science ®Google Scholar
• Mereddy S, Bermingham MJ, StJohn DH, et al. Grain refinement of wire arc additively manufactured titanium by the addition of silicon. J Alloy Compd. 2017;695:2097–2103.
   Web of Science ®Google Scholar
• Sui S, Chew Y, Weng F, et al. Study of the intrinsic mechanisms of nickel additive for grain refinement and strength enhancement of laser aided additively manufactured Ti–6Al–4V. Int J Extrem Manuf. 2022;4:035102.
   Google Scholar
• Xue A, Lin X, Wang L, et al. Heat-affected coarsening of β grain in titanium alloy during laser directed energy deposition. Scripta Mater. 2021;205:114180.
   Web of Science ®Google Scholar
• Bermingham MJ, McDonald SD, StJohn DH, et al. Beryllium as a grain refiner in titanium alloys. J Alloys Compd. 2009;481:L20–L23.
   Web of Science ®Google Scholar
• Bermingham MJ, StJohn DH, Krynen J, et al. Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing. Acta Mater. 2019;168:261–274.
   Web of Science ®Google Scholar
• Gröbner J, Mirković D, Schmid-Fetzer R. Thermodynamic aspects of grain refinement of Al–Si alloys using Ti and B. Mater Sci Eng A. 2005;395:10–21.
   Web of Science ®Google Scholar
• Semiatin SL, Soper JC, Sukonnik IM. Short-time beta grain growth kinetics for a conventional titanium alloy. Acta Mater. 1996;44:1979–1986.
   Web of Science ®Google Scholar
• Xiong Z, Pang X, Liu S, et al. Hierarchical refinement of nickel-microalloyed titanium during additive manufacturing. Scripta Mater. 2021;195:113727.
   Web of Science ®Google Scholar
• Zhang D, Sun S, Qiu D, et al. Metal alloys for fusion-based additive manufacturing. Adv Eng Mater. 2018;20:1700952.
   Web of Science ®Google Scholar