Adjusting approaches of basal texture for improvement of tension-compression asymmetry in extruded magnesium alloys

References

• Song J, Chen J, Xiong X, et al. Research advances of magnesium and magnesium alloys worldwide in 2021. J Magnes Alloy. 2022;10(4):863–898.
   Google Scholar
• Zeng Z, Salehi M, Kopp A, et al. Recent progress and perspectives in additive manufacturing of magnesium alloys. J Magnes Alloy. 2022;10(6):1511–1541.
   Web of Science ®Google Scholar
• Shi B, Yang C, Peng Y, et al. Anisotropy of wrought magnesium alloys: a focused overview. J Magnes Alloy. 2022;10(6):1476–1510.
   Google Scholar
• Agnew SR, Nie JF. Preface to the viewpoint set on: the current state of magnesium alloy science and technology. Scripta Mater. 2010;63(7):671–673.
   Web of Science ®Google Scholar
• Stanford N, Sotoudeh K, Bate PS. Deformation mechanisms and plastic anisotropy in magnesium alloy AZ31. Acta Mater. 2011;59(12):4866–4874.
   Google Scholar
• Kweon S, Raja DS. Investigation of the mechanical response of single crystal magnesium considering slip and twin. Int J Plasticity. 2019;112:1–17.
   Google Scholar
• Park SH, Lee JH, Moon BG, et al. Tension–compression yield asymmetry in as-cast magnesium alloy. J Alloys Compd. 2014;617:277–280.
   Web of Science ®Google Scholar
• Kim B, Baek S-M, Jeong HY, et al. Grain refinement and reduced yield asymmetry of extruded Mg–5Sn–1Zn alloy by Al addition. J Alloys Compd. 2016;660:304–309.
   Google Scholar
• Wei J, You J, Zhang D, et al. Reducing yield asymmetry in a wrought Mg–9Al alloy by randomized texture achieved via multi-directional forging. Mater Sci Eng A. 2020;796:140003.
   Google Scholar
• Lin J, Ren W, Wang Q, et al. Influence of grain size and texture on the yield strength of Mg alloys processed by severe plastic deformation. Adv Mater Sci Eng. 2014;2014:356572.
   Google Scholar
• Indurkar PP, Baweja S, Perez R, et al. Predicting textural variability effects in the anisotropic plasticity and stability of hexagonal metals: application to magnesium and its alloys. Int J Plasticity. 2020;132:102762.
   Google Scholar
• Mao P, Liu Z, Wang C. Texture effect on high strain rates tension and compression deformation behavior of extruded AM30 alloy. Mater Sci Eng A. 2012;539:13–21.
   Web of Science ®Google Scholar
• Wu G, Yu J, Jia L, et al. Microstructure and texture evolution of Mg-Gd-Y-Zr alloy during reciprocating upsetting-extrusion. Materials (Basel). 2020;13(21):4932.
   PubMedGoogle Scholar
• Zhao X, Li S, Zheng Y, et al. The microstructure evolution, texture weakening mechanism and mechanical properties of AZ80 Mg alloy processed by repetitive upsetting-extrusion with reduced deformation temperature. J Alloys Compd. 2021;883:160871.
   Google Scholar
• Meng Y, Yu J, Zhang G, et al. Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5Zr alloy during rotary backward extrusion. J Magnes Alloy. 2020;8(4):1228–1237.
   Web of Science ®Google Scholar
• Gautam PC, Biswas S. Effect of ECAP temperature on the microstructure, texture evolution and mechanical properties of pure magnesium. Mater Today Proc. 2021;44:2914–2918.
   Google Scholar
• Martynenko NS, Lukyanova EA, Serebryany VN, et al. Increasing strength and ductility of magnesium alloy WE43 by equal-channel angular pressing. Mater Sci Eng A. 2018;712:625–629.
   Google Scholar
• Wang Q, Song J, Jiang B, et al. An investigation on microstructure, texture and formability of AZ31 sheet processed by asymmetric porthole die extrusion. Mater Sci Eng A. 2018;720:85–97.
   Google Scholar
• Xu J, Jiang B, Kang Y, et al. Tailoring microstructure and texture of Mg–3Al–1Zn alloy sheets through curve extrusion process for achieving low planar anisotropy. J Mater Sci Technol. 2022;113:48–60.
   Google Scholar
• Chen XM, Chen WZ, Zhang LX, et al. Combined-extrusion techniques for fabricating yield-symmetric ZK61 magnesium alloys rods focusing on texture influence on their mechanical responses. J Mater Process Tech. 2021;297:117236.
   Google Scholar
• Lin J, Wang Q, Peng L, et al. Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression. J Alloys Compd. 2009;476(1):441–445.
   Google Scholar
• Lin J-b, Wang Q-d, Chen Y-j, et al. Microstructure and texture characteristics of ZK60 Mg alloy processed by cyclic extrusion and compression. Trans Nonferrous Met Soc China. 2010;20(11):2081–2085.
   Google Scholar
• Barnett MR, Keshavarz Z, Beer AG, et al. Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn. Acta Mater. 2004;52(17):5093–5103.
   Web of Science ®Google Scholar
• Barnett MR, Nave MD, Ghaderi A. Yield point elongation due to twinning in a magnesium alloy. Acta Mater. 2012;60(4):1433–1443.
   Google Scholar
• Figueiredo RB, Száraz Z, Trojanová Z, et al. Significance of twinning in the anisotropic behavior of a magnesium alloy processed by equal-channel angular pressing. Scripta Mater. 2010;63(5):504–507.
   Google Scholar
• Barnett MR. Twinning and the ductility of magnesium alloys: Part I: “Tension” twins. Mater Sci Eng A. 2007;464(1):1–7.
   Google Scholar
• Cepeda-Jiménez CM, Pérez-Prado MT. Microplasticity-based rationalization of the room temperature yield asymmetry in conventional polycrystalline Mg alloys. Acta Mater. 2016;108:304–316.
   Google Scholar
• Cáceres CH, Lukáč P. Strain hardening behaviour and the Taylor factor of pure magnesium. Philos Mag. 2008;88(7):977–989.
   Web of Science ®Google Scholar
• Barnett MR. A taylor model based description of the proof stress of magnesium AZ31 during hot working. Metall Mater Trans A. 2003;34(9):1799–1806.
   Google Scholar
• Wang Y, Choo H. Influence of texture on Hall–Petch relationships in an Mg alloy. Acta Mater. 2014;81:83–97.
   Web of Science ®Google Scholar
• Wang HX, Zhang LX, Chen WZ, et al. Improved tension/compression asymmetry achieved in high-strength magnesium alloys via compression-extrusion process. Mater Sci Eng A. 2018;736:239–247.
   Google Scholar
• Wu WJ, Chen WZ, Zhang LX, et al. Improvement of tension/compression asymmetry for high-performance ZK61 magnesium alloy rod via tailoring deformation parameters: upsetting-extrusion temperature and upsetting ratio. Mater Sci Eng A. 2021;823:141767.
   Google Scholar
• Cui C, He J, Wang W, et al. Microstructure, texture and mechanical properties of extruded AZ31 Mg alloy during small strain multi-directional forging with gradient cooling. J Alloys Compd. 2022;909:164795.
   Google Scholar
• Wang HX, Chen WZ, Zhang WC, et al. Microstructure and texture evolution during compression-extrusion process for tension/compression symmetrical ZK61 magnesium alloy rod. Mater Sci Eng A. 2021;806:140807.
   Google Scholar
• Suh J, Victoria-Hernández J, Letzig D, et al. Enhanced mechanical behavior and reduced mechanical anisotropy of AZ31 Mg alloy sheet processed by ECAP. Mater Sci Eng A. 2016;650:523–529.
   Google Scholar
• Zhang L, Zhang W, Cao B, et al. Effects of texture and grain size on the yield strength of ZK61 alloy rods processed by cyclic extrusion and compression. Materials (Basel). 2017;10(11):1234.
   PubMedGoogle Scholar
• Barnett MR, Keshavarz Z, Ma X. A semianalytical sachs model for the flow stress of a magnesium alloy. Metallurgical and Materials Transactions A. 2006;37(7):2283–2293.
   Google Scholar
• Responsables S. The Oxford engineering science series, The Oxford engineering science series.
   Google Scholar
• Armstrong RW. Dislocation pile-ups, material strength levels, and thermal activation. Metallurgical and Materials Transactions A. 2016;47(12):5801–5810.
   Google Scholar
• Armstrong RW. Hall-Petch description of nanopolycrystalline Cu, Ni and Al strength levels and strain rate sensitivities. Philosophical Magazine. 2016;96(29):3097–3108.
   Web of Science ®Google Scholar
• Jain A, Duygulu O, Brown DW, etal. Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet. Mater. Sci. Eng. A. 2008;486(1):545–555.
   Google Scholar
• Yu HH, Xin YC, Wang MY, etal. Hall-Petch relationship in Mg alloys: A review. J Mater Sci Technol. 2018;34(2):248–256.
   Web of Science ®Google Scholar
• Armstrong R, Codd I, Douthwaite RM, etal. The plastic deformation of polycrystalline aggregates. The Philosophical Magazine. 2006;7(73):45–58.
   Google Scholar
• Guan B, Xin Y, Huang X, etal. Quantitative prediction of texture effect on Hall-Petch slope for magnesium alloys. Acta Mater. 2019;173:142–152.
   Google Scholar