References
- Herzog D, Seyda V, Wycisk E, et al. Additive manufacturing of metals. Acta Mater. 2016;117:371–392.
- Ngo TD, Kashani A, Imbalzano G, et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Pt B-Eng. 2018;143:172–196.
- Tan C, Weng F, Sui S, et al. Progress and perspectives in laser additive manufacturing of key aeroengine materials. Int J Mach Tools Manuf. 2021;170:103804.
- Cunningham CR, Flynn JM, Shokrani A, et al. Invited review article: strategies and processes for high quality wire arc additive manufacturing. Addit Manuf. 2018;22:672–686.
- Körner C. Additive manufacturing of metallic components by selective electron beam melting—a review. Int Mater Rev. 2016;61:361–377.
- Luo Z, Zhao Y. A survey of finite element analysis of temperature and thermal stress fields in powder bed fusion additive manufacturing. Addit Manuf. 2018;21:318–332.
- Yang M, Wang L, Yan W. Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening. npj Comput Mater. 2021;7:1–2.
- Guo Q, Qu M, Chuang CA, et al. Phase transformation dynamics guided alloy development for additive manufacturing. Addit Manuf. 2022;59:103068.
- Powell D, Rennie AE, Geekie L, et al. Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders. J Clean Prod. 2020;268:122077.
- DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components–process, structure and properties. Prog Mater Sci. 2018;92:112–224.
- Luo XT, Li CX, Shang FL, et al. High velocity impact induced microstructure evolution during deposition of cold spray coatings: a review. Surf Coat Technol. 2014;254:11–20.
- Bagherifard S, Kondas J, Monti S, et al. Tailoring cold spray additive manufacturing of steel 316 L for static and cyclic load-bearing applications. Mater Des. 2021;203:109575.
- Flynn JM, Shokrani A, Newman ST, et al. Hybrid additive and subtractive machine tools–research and industrial developments. Int J Mach Tools Manuf. 2016;101:79–101.
- Phuong V, Stephen Y, Wilson W. Is cold spray additive manufacturing? Conference of Metallurgists (COM) 2020, August 24–27, 2020, Toronto, Canada, 2020.
- Vargas-Uscategui A, King PC, Styles MJ, et al. Residual stresses in cold spray additively manufactured hollow titanium cylinders. J Therm Spray Technol. 2020;29:1508–1524.
- Singh R, Schruefer S, Wilson S, et al. Influence of coating thickness on residual stress and adhesion-strength of cold-sprayed Inconel 718 coatings. Surf Coat Technol. 2018;350:64–73.
- White BC, Story WA, Brewer LN, et al. Fracture mechanics methods for evaluating the adhesion of cold spray deposits. Eng Fract Mech. 2019;205:57–69.
- Vargas-Uscategui A, King PC, Yang S, et al. Toolpath planning for cold spray additively manufactured titanium walls and corners: effect on geometry and porosity. J Mater Process Technol. 2021;298:117272.
- Lett S, Quet A, Hémery S, et al. Residual stresses development during cold spraying of Ti-6Al-4V combined with in situ shot peening. J Therm Spray Technol. 2022;32:1018–1032.
- Kuroda S, Kawakita J, Watanabe M, et al. 7 – Current status and future prospects of warm spray technology. In: Espallargas N, editor. Future development of thermal spray coatings: types, designs, manufacture and applications. Cambridge: Elsevier; 2015. p. 163–206.
- Wang Q, Luo X, Tsutsumi S, et al. Measurement and analysis of cold spray residual stress using arbitrary Lagrangian–Eulerian method. Addit Manuf. 2020;35:101296.
- Huang W, Wang Q, Ma N, et al. Distribution characteristics of residual stresses in typical wall and pipe components built by wire arc additive manufacturing. J Manuf Process. 2022;82:434–447.
- Muhammad NA, Geng P, Wu C, et al. Unravelling the ultrasonic effect on residual stress and microstructure in dissimilar ultrasonic-assisted friction stir welding of Al/Mg alloys. Int J Mach Tools Manuf. 2023;186:104004.
- Boruah D, Ahmad B, Lee TL, et al. Evaluation of residual stresses induced by cold spraying of Ti-6Al-4V on Ti-6Al-4V substrates. Surf Coat Technol. 2019;374:591–602.
- Marzbanrad B, Toyserkani E, Jahed H. Customization of residual stress induced in cold spray printing. J Mater Process Technol. 2021;289:116928.
- Li Y, Wei Y, Luo X, et al. Correlating particle impact condition with microstructure and properties of the cold-sprayed metallic deposits. J Mater Sci Technol. 2020;40:185–195.
- Pattison J, Celotto S, Morgan R, et al. Cold gas dynamic manufacturing: a non-thermal approach to freeform fabrication. Int J Mach Tools Manuf. 2007;47:627–634.
- Wu H, Xie X, Liu M, et al. Stable layer-building strategy to enhance cold-spray-based additive manufacturing. Addit Manuf. 2020;35:101356.
- Wu H, Xie X, Liu S, et al. Bonding behavior of Bi-metal-deposits produced by hybrid cold spray additive manufacturing. J Mater Process Technol. 2022;299:117375.
- Tan AW, Sun W, Phang YP, et al. Effects of traverse scanning speed of spray nozzle on the microstructure and mechanical properties of cold-sprayed Ti6Al4 V coatings. J Therm Spray Technol. 2017;26:1484–1497.