Judging of machining feasibility and calculation of midsection for the five-axis milling of shrouded centrifugal impeller

References

• Wu CH, A general theory of three-dimensional flow in subsonic and supersonic turbomachines of axial, radial, and mixed-flow types; 1952. (Technical Report; NACA Technical Note 2604). p. 1–93.
   Google Scholar
• Wu CH, Three-dimensional turbomachines flow equations expressed with respect to no nor thogonal curvilinear coordinates and methods of solution. 1976(Technical Report; The 3rd ISABE). p. 233–252.
   Google Scholar
• Mailach R, Vogeler K. Recent german research on periodial unsteady flows in turbomachinery. Flow Turbul Combust. 2009;4:449–484.
   Google Scholar
• Zhao HJ, Wang ZH, Ye SB. Numerical investigations on tip leakage flow characteristics and vortex trajectory prediction model in centrifugal compressor. Proc Inst Mech Eng Part A: J PowerEnergy. 2016;8:757–772.
   Google Scholar
• Zhao HJ, Wang ZH, Xi G. Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall. Sci China. 2017;6:122–132.
   Google Scholar
• Fan HZ, Xi G. Efficient tool path generation for five-axis machining of a difficult machined centrifugal impeller. Adv Mech Eng. 2017;10:1–10.
   Google Scholar
• Fan HZ, Wang SJ, Xi G. A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades. Proc Inst Mech Eng Part A: J Eng Manuf. 2017;1:155–166.
   Google Scholar
• Fan HZ, Xi G, Wang W. An efficient five-axis machining method of centrifugal impeller based on regional milling. Int J Adv Manuf Technol. 2016;1–4:789–799.
   Google Scholar
• Chu CH, Huang WN, Li YW. An integrated framework of tool path planning in 5-axis machining of centrifugal impeller with split blades. J Intell Manuf. 2012;3:687–698.
   Google Scholar
• Chu CH, Hsieh HT, Lee CH. Spline-constrained tool-path planning in five-axis flank machining of ruled surfaces. Int J Adv Manuf Technol. 2015;9–12:2097–2104.
   Google Scholar
• Zhu LM, Ding H, Xiong YL. Simultaneous optimization of tool path and shape for five-axis flank milling. Comput-Aided Des. 2012;12:1229–1234.
   Google Scholar
• Li ZL, Niu JB, Wang XZ. Mechanistic modeling of five-axis machining with a general end mill considering cutter runout. Int J Mach Tools Manuf. 2015;96:67–79.
   Web of Science ®Google Scholar
• Wu BH, Zhang DH, Luo M. Collision and interference correction for impeller machining with non-orthogonal four-axis machine tool. Int J Adv Manuf Technol. 2013;1–4:693–700.
   Google Scholar
• Han FY, Zhang DH, Luo M. An approach to optimize the tilt angle of indexable table for nonorthogonal four-axis milling of impeller. Int J Adv Manuf Technol. 2015;9–12:1893–1904.
   Google Scholar
• Sun YW, Jiang SL. Predictive modeling of chatter stability considering force-induced deformation effect in milling thin-walled parts. Int J Mach Tools Manuf. 2018;135:38–52.
   Web of Science ®Google Scholar
• Xu JT, Zhang DY, Sun YW. Kinematics performance oriented smoothing method to plan tool orientations for 5-axis ball-end CNC machining. Int J Mech Sci. 2019;157–158:293–303.
   Web of Science ®Google Scholar
• Tang J, Turunen-Saaresti T, Larjola J. Use of partially shrouded impeller in a small centrifugal compressor. J Thermal Sci. 2008;1:21–27.
   Google Scholar
• JaakkoLarjola TT-S. Use of partially shrouded impeller in a small centrifugal compressor. J Thermal Sci. 2008;1:002.
   Google Scholar
• Wang J, Zhao JS, Liu C. Cathode design in electrochemical machining of cavities among clades of closed integral impeller. China Mech Eng. 2010;12:1414–1417. in Chinese.
   Google Scholar
• Liu C, Xu JW, Zhao JS. Research on combined electrical machining of 3D-flow closed impeller Ι - overall scheme design and key technology. Acta Aeronautica ET Astronautica Sinica. 2010;3:650–654. in Chinese.
   Google Scholar
• Liu C, Xu JW, Zhao JS. Research on combined electrical machining of 3D-flow closed impellerII- numerically controlled electrochemical machining for pre-processing. Acta Aeronautica ET Astronautica Sinica. 2010;4:871–876. in Chinese.
   Google Scholar
• Liu C, Xu JW, Zhao JS. Research on combined electrical machining of 3D-flow closed impeller III - key techniques of numerically controlled electron discharge machining for precision work. Acta Aeronautica ET Astronautica Sinica. 2010;6:1299–1304. in Chinese.
   Google Scholar
• Liu X, Kang X, Xi X. Electrode feed path planning for multi-axis EDM of integral shrouded impeller. Int J Adv Manuf Technol. 2013;5–8:1697–1706.
   Google Scholar
• Liu X, Kang X, Zhao W. Electrode feeding path searching for 5-axis EDM of integral shrouded blisks. Procedia CIRP. 2013;6:107–111.
   Google Scholar
• Chen H, Xi XC, Zhao WS. Feedrate planning for synchronized movements involving rotary axes in multi-axis EDM for shrouded blisks. Int J Adv Manuf Technol. 2016;9:2645–2654.
   Google Scholar
• Innotec S. High-speed milling of large impellers. World Pumps. 2008;507:26–27.
   Google Scholar
• Cai XJ, Research on NC programming method for closed impeller based on UG [M.S. thesis], Beijing, P. R. C: Beijing Jiaotong Unicersity; 2010.
   Google Scholar
• Cao LX, Xue YF. Tool-path planning for 5-axis NC rough machining of closed impeller channel. J Dalian Univ Technol. 2013;4:514–520. in Chinese.
   Google Scholar
• Liu W, Zhang JW, Zhu SM. Efficient tool posture global collision-free area generation for 5-axis point clouds machining. Int J Adv Manuf Technol. 2017;1–4:1013–1023.
   Google Scholar