Investigation of hot workability behavior of as-cast Mg–5Sn–2Ca (TX52) magnesium alloy through processing map

References

• Abu Leil, T., Rao, K. P., Hort, N., & Kainer, K. U. (2006). Corrosion behavior and microstructure of a broad range of Mg–Sn–X alloys. In A. A. Luo, N. R. Neelameggham, & R. S. Beals (Eds.), Magnesium technology 2006 (pp. 281–286). Warrendale, PA: The Minerals, Metals and Materials Society.
   Google Scholar
• Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N., & Kainer, K. U. (2013). Hot workability analysis with processing map and texture characteristics of as-cast TX32 magnesium alloy. Journal of Materials Science, 48, 5236–5246.10.1007/s10853-013-7314-9
   Web of Science ®Google Scholar
• Dong, X., Fu, J., Wang, J., & Yang, Y. (2013). Microstructure and tensile properties of as-cast and as-aged Mg–6Al–4Zn alloys with Sn addition. Materials and Design, 51, 564–567.
   Web of Science ®Google Scholar
• Flynn, P. W., Mote, J., & Dorn, J. E. (1961). On the thermally activated mechanism of prismatic slip in magnesium single crystals. Transactions of Metallurgical Society of AIME, 221, 1148–1154.
   Google Scholar
• Frost, H. J., & Ashby, M. F. (1982). Deformation-mechanism maps: The plasticity and creep of metals and ceramics (p. 44). Oxford: Pergamon Press.
   Google Scholar
• Hort, N., Huang, Y. D., Abu Leil, T., Rao, K. P., & Kainer, K. U. (2011). Properties and processing of magnesium-tin-calcium alloys. Kovove Materialia, 49, 163–177.
   Web of Science ®Google Scholar
• Hradilová, M., Montheillet, F., Fraczkiewicz, A., Desrayaud, C., & Lejček, P. (2013). Effect of Ca-addition on dynamic recrystallization of Mg–Zn alloy during hot deformation. Materials Science and Engineering A, 580, 217–226.10.1016/j.msea.2013.05.054
   Web of Science ®Google Scholar
• Hu, H., Yu, A., Li, N., & Allison, J. E. (2003). Potential magnesium alloys for high temperature die cast automotive applications: A review. Materials and Manufacturing Processes, 18, 687–717.10.1081/AMP-120024970
   Web of Science ®Google Scholar
• Jonas, J. J., Sellars, C. M., & Tegart, W. J. McG. (1969). Strength and structure under hot-working conditions. International Materials Reviews, 14, 1–24.10.1179/095066069790138056
   Google Scholar
• Kim, B.-H., Jo, S.-M., Lee, Y.-C., Park, Y.-H., & Park, I.-K. (2012). Microstructure, tensile properties and creep behavior of Mg–4Al–2Sn containing Ca alloy produced by different casting technologies. Materials Science and Engineering A, 535, 40–47.10.1016/j.msea.2011.12.038
   Web of Science ®Google Scholar
• Kim, D. H., Lee, J. Y., Lim, H. K., Kyeong, J. S., Kim, W. T., & Kim, D. H. (2008). The effect of microstructure evolution on the elevated temperature mechanical properties in Mg–Sn–Ca system. Materials Transactions, 49, 2405–2413.10.2320/matertrans.MER2008140
   Web of Science ®Google Scholar
• Kim, D.-W., Suh, B.-C., Shim, M.-S., Bae, J. H., Kim, D. H., & Kim, N. J. (2013). Texture evolution in Mg–Zn–Ca alloy sheets. Metallurgical and Materials Transactions A, 44, 2950–2961.10.1007/s11661-013-1674-2
   Web of Science ®Google Scholar
• Kim, Y.-H., Kim, J.-H., Yu, H.-S., Choi, J.-W., & Son, H.-T. (2014). Microstructure and mechanical properties of Mg–xLi–3Al–1Sn–0.4Mn alloys (x = 5, 8 and 11 wt%). Journal of Alloys and Compounds, 583, 15–20.10.1016/j.jallcom.2013.08.154
   Web of Science ®Google Scholar
• Koike, J., Kobayashi, T., Mukai, T., Watanabe, H., Suzuki, M., Maruyama, K., & Higashi, K. (2003). The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys. Acta Materialia, 51, 2055–2065.10.1016/S1359-6454(03)00005-3
   Web of Science ®Google Scholar
• Kozlov, A., Ohno, M., Abu Leil, T., Hort, N., Kainer, K. U., & Schmid-Fetzer, R. (2008). Phase equilibria, thermodynamics and solidification microstructures of Mg–Sn–Ca alloys, part 2: Prediction of phase formation in Mg-rich Mg–Sn–Ca cast alloys. Intermetallics, 16, 316–321.10.1016/j.intermet.2007.10.011
   Web of Science ®Google Scholar
• Mahmudi, R., & Moeendarbari, S. (2013). Effects of Sn additions on the microstructure and impression creep behaviour of AZ91 magnesiumalloy. Materials Science and Engineering A, 566, 30–39.10.1016/j.msea.2012.12.076
   Web of Science ®Google Scholar
• Morris, J. R., Scharff, J., Ho, K. M., Turner, D. E., Ye, Y. Y., & Yoo, M. H. (1997). Prediction of a {1122} hcp stacking fault using a modified generalized stacking-fault calculation. Philosophical Magazine A, 76, 1065–1077.10.1080/01418619708200015
   Web of Science ®Google Scholar
• Nayyeri, G., & Mahmudi, R. (2010). The microstructure and impression creep behavior of cast, Mg–5Sn–xCa alloys. Materials Science and Engineering A, 527, 2087–2098.10.1016/j.msea.2009.11.053
   Web of Science ®Google Scholar
• Nayyeri, M. J., Ganjkhanlou, Y., Kolahi, A., & Jamil, A. M. (2014). Effect of Ca and rare earth additions on the texture, microhardness, microstructure and structural properties of as-cast Mg–4Al–2Sn alloys. Transactions Indian Institute of Metals. doi:10.1007/s12666-013-0365-4
   Web of Science ®Google Scholar
• Obara, T., Yoshinga, H., & Morozumi, S. (1973). {112̄2}〈1123〉Slip system in magnesium. Acta Metallurgica, 21, 845–853.10.1016/0001-6160(73)90141-7
   Google Scholar
• Prasad, Y. V. R. K. (2003). Processing maps: A status report. Journal of Materials Engineering and Performance, 12, 638–645.10.1361/105994903322692420
   Web of Science ®Google Scholar
• Prasad, Y. V. R. K., & Sasidhara, S. (1997). Hot working guide: A compendium of processing maps. Materials Park, OH: ASM International.
   Google Scholar
• Prasad, Y. V. R. K., & Seshacharyulu, T. (1998). Modelling of hot deformation for microstructural control. International Materials Reviews, 43, 243–258.10.1179/imr.1998.43.6.243
   Web of Science ®Google Scholar
• Qi, F., Zhang, D., Zhang, X., & Xu, X. (2014). Effect of Sn addition on the microstructure and mechanical properties of Mg–6Zn–1Mn (wt.%) alloy. Journal of Alloys and Compounds, 585, 656–666.10.1016/j.jallcom.2013.09.156
   Web of Science ®Google Scholar
• Rao, K. P., Ip, H. Y., Suresh, K., Prasad, Y. V. R. K., Wu, C. M. L., Hort, N., & Kainer, K. U. (2013). Compressive strength and hot deformation mechanism in as-cast Mg–4Al–2Ba–2Ca (ABaX422) alloy. Philosophical Magazine, 93, 4364–4377.10.1080/14786435.2013.830202
   Web of Science ®Google Scholar
• Rao, K. P., Prasad, Y. V. R. K., Suresh, K., Hort, N., & Kainer, K. U. (2012). Hot deformation behavior of Mg–2Sn–2Ca alloy in as-cast condition and after homogenization. Materials Science and Engineering A, 552, 444–450.10.1016/j.msea.2012.05.068
   Web of Science ®Google Scholar
• Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N., & Kainer, K. U. (2013). Effect of calcium addition on the hot working behaviour of as-cast AZ31 magnesium alloy. Materials Science and Engineering A, 588, 272–279.10.1016/j.msea.2013.09.031
   Web of Science ®Google Scholar
• Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N., & Kainer, K. U. (2014a). A study on the hot deformation behavior of cast Mg–4Sn–2Ca (TX42) alloy. JOM, 66, 322–328.10.1007/s11837-013-0820-z
   Web of Science ®Google Scholar
• Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N., & Kainer, K. U. (2014b). Study of hot forging behavior of as-cast Mg–3Al–1Zn–2Ca alloy towards optimization of its hot workability. Materials & Design, 57, 697–704.10.1016/j.matdes.2014.01.032
   Web of Science ®Google Scholar
• Terbush, J. R., Chen, O. H., Jones, J. W., & Pollock, T. M. (2012). The dependence of creep behavior on elemental partitioning in Mg–5Al–3Ca–xSn alloys. Metallurgical and Materials Transactions A, 43, 3120–3134.10.1007/s11661-012-1158-9
   Web of Science ®Google Scholar
• Wei, S., Zhu, T., Hodgson, M., & Gao, W. (2013). Effects of Sn addition on the microstructure and mechanical properties of as-cast, rolled and annealed Mg–4Zn alloys. Materials Science and Engineering A, 585, 139–148.10.1016/j.msea.2013.07.051
   Web of Science ®Google Scholar
• Yang, M., Guo, T., Li, H., Duan, C., & Zhang, J. (2013). Effects of Sn addition on as-cast microstructure and mechanical properties of Mg–3.8Zn–2.2Ca magnesium alloy. Rare Metal Materials and Engineering, 42, 1541–1546.
   Web of Science ®Google Scholar
• Ziegler, H. (1965). Some extremum principles in irreversible thermodynamics with application to continuum mechanics. In I. N. Sneddon & R. Hill (Eds.), Progress in solid mechanics (Vol. 4, pp. 91–193). New York, NY: Wiley.
   Google Scholar