Proposition of a model to determine the process parameters for manufacturing thick parts with WAAM technology

References

• Cui, J., Yuan, L., Commins, P., He, F., Wang, J., & Pan, Z. (2021). WAAM process for metal block structure parts based on mixed heat input. The International Journal of Advanced Manufacturing Technology, 113(1–2), 503–16. https://doi.org/10.1007/s00170-021-06654-x
   Web of Science ®Google Scholar
• Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2014). Wire-feed additive manufacturing of metal components: Technologies, developments and future interests. International Journal of Advanced Manufacturing Technology, 81, 465–481. https://doi.org/10.1007/s00170-015-7077-3
   Web of Science ®Google Scholar
• Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015). A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM. Robotics and Computer-Integrated Manufacturing, 31, 101–110. https://doi.org/10.1016/j.rcim.2014.08.008
   Web of Science ®Google Scholar
• Dinovitzer, M., Chen, X., Laliberte, J., Huang, X., & Frei, H. (2019). Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure. Additive Manufacturing, 26, 138–146. https://doi.org/10.1016/j.addma.2018.12.013
   Web of Science ®Google Scholar
• Dunlavey, M. R. (1983). Efficient polygon-filling algorithms for raster displays. ACM Transactions on Graphics (TOG), 2(4), 264–273. https://doi.org/10.1145/245.248
   Web of Science ®Google Scholar
• Farouki, R. T., Koenig, T., Tarabanis, K. A., Korein, J. U., & Batchelder, J. S. (1995). Path planning with offset curves for layered fabrication processes. Journal of Manufacturing Systems, 14(5), 355–368. https://doi.org/10.1016/0278-6125(95)98872-4
   Web of Science ®Google Scholar
• Ferreira, R. P., Vilarinho, L. O., & Scotti, A. (2022). Development and implementation of a software for wire arc additive manufacturing preprocessing planning: Trajectory planning and machine code generation. Welding in the World, 66(3), 455–470. https://doi.org/10.1007/s40194-021-01233-w
   Web of Science ®Google Scholar
• Filomeno Martina, W. S. (2015). Wire + arc additive vs. from solid: A cost comparison, welding engineering and laser processing centre. Cranfield University.
   Google Scholar
• Fronius. (2014). Cold metal transfer: The technology. CMT Technology.
   Google Scholar
• Jing, X., Xizhi, G. U., DING, D., Pan, Z., & Chen, K. (2018). A review of slicing methods for directed energy deposition based additive manufacturing. Rapid Prototyping Journal, 24(6), 1012–1025. https://doi.org/10.1108/RPJ-10-2017-0196
   Web of Science ®Google Scholar
• Li, H., Dong, Z., & Vickers, G. W. (1994). Optimal toolpath pattern identification for single island, sculptured part rough machining using fuzzy pattern analysis. Computer-Aided Design, 26(11), 787–795. https://doi.org/10.1016/0010-4485(94)90092-2
   Web of Science ®Google Scholar
• Manokruang, S. “Process Parameters Effect on Weld Beads Geometry Deposited by Wire and Arc Additive Manufacturing (WAAM).” International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing. Springer, Cham, 2020.
   Google Scholar
• Panchagnula, J. S., & Simhambhatla, S. (2016). Inclined slicing and weld-deposition for additive manufacturing of metallic objects with large overhangs using higher order kinematics. Virtual and Physical Prototyping, 11(2), 99–108. https://doi.org/10.1080/17452759.2016.1163766
   Web of Science ®Google Scholar
• Park, S. C., & Choi, B. K. (2000). Tool-path planning for direction-parallel area milling. Computer-Aided Design, 32(1), 17–25. https://doi.org/10.1016/S0010-4485(99)00080-9
   Web of Science ®Google Scholar
• Quérard, V. Réalisation de pièces aéronautiques de grandes dimensions par fabrication additive WAAM. Diss. 2019.
   Google Scholar
• Rajan, V. T., Srinivasan, V., & Tarabanis, K. A. (2001). The optimal zigzag direction for filling a two‐dimensional region. Rapid Prototyping Journal, 7(5), 231–241. https://doi.org/10.1108/13552540110410431
   Web of Science ®Google Scholar
• Wang, H., Jang, P., & Stori, J. A. (2005). A metric-based approach to two-dimensional (2D) tool-path optimization for high-speed machining. Journal of Manufacturing Science and Engineering, 127(1), 33–48. https://doi.org/10.1115/1.1830492
   Web of Science ®Google Scholar
• Xia, C., Zengxi, P. A. N., ZHANG, S., Polden, J., Wang, L., Li, H., Xu, Y., & Chen, S. (2020). Model predictive control of layer width in wire arc additive manufacturing. Journal of Manufacturing Processes, 58, 179–186. https://doi.org/10.1016/j.jmapro.2020.07.060
   Web of Science ®Google Scholar
• Yang, Y., Loh, H. T., Fuh, J. Y. H., & Wang, Y. G. (2002). Equidistant path generation for improving scanning efficiency in layered manufacturing. Rapid Prototyping Journal, 8(1), 30–37. https://doi.org/10.1108/13552540210413284
   Web of Science ®Google Scholar
• Zhao, Y., Jia, Y., Chen, S., Shi, J., & Li, F. (2020). Process planning strategy for wire-arc additive manufacturing: Thermal behavior considerations. Additive Manufacturing, 32, 100935. https://doi.org/10.1016/j.addma.2019.100935
   Web of Science ®Google Scholar