Piezoelectric property optimization for piezoelectric single crystals using parametric estimation

References

• Lee JH, Kim TS, Park HH. Hybrid fabrication of screen-printed Pb(Zr,Ti)O3 thick films using a sol-infiltration and photosensitive direct-patterning technique. J. Microelectron. Packag. Soc 2015;22(4):83.
   Google Scholar
• Topolov V. Comment on ‘Complete sets of elastic, dielectric, and piezoelectric properties of flux-grown [011]-poled Pb(Mg1/3Nb2/3)O3−(28–32)% PbTiO3 single crystals’, [Appl. Phys. Lett. 92, 142906 (2008)]. Appl Phys Lett. 2010;96(19):196101.
   Web of Science ®Google Scholar
• Sun EW, Cao WW, Han PD. Complete set of material properties of [011]c poled 0.24Pb(In1/2Nb1/2)O3-0.46Pb(Mg1/3Nb2/3)O3-0.30PbTiO3 single crystal. Mater Lett. 2011;65(19–20):2855.
   PubMed Web of Science ®Google Scholar
• Yin JH, Jiang B, Cao W. Elastic, piezoelectric, and dielectric properties of 0.955Pb(Zn1/3Nb2/3)O3/-0.45PbTiO3 single crystal with designed multidomains. IEEE Trans Ultrason Ferroelectr Freq Control. 2000;47(1):285.
   PubMed Web of Science ®Google Scholar
• Zhang R, Jiang B, Jiang WH, et al. Complete set of properties of 0.92Pb(Zn1/3Nb2/3)O3–0.08PbTiO3 single crystal with engineered domains. Mater Lett. 2003;57(7):1305.
   Web of Science ®Google Scholar
• Liu XZ, Zhang SJ, Luo J, et al. Complete set of material constants of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 single crystal with morphotropic phase boundary composition. J Appl Phys. 2009;106(7):074112.
   PubMed Web of Science ®Google Scholar
• Wang F, Luo L, Zhou D, et al. Complete set of elastic, dielectric, and piezoelectric constants of orthorhombic 0.71Pb(Mg1∕3Nb2∕3)O3–0.29PbTiO3 single crystal. Appl Phys Lett. 2007;90(21):212903.
   Web of Science ®Google Scholar
• Zhang YY, Liu DA, Zhang QH, et al. Complete set of material constants of 〈011〉-poled rhombohedral single-crystal 0.25Pb(In1/2Nb1/2)O3-0.47Pb(Mg1/3Nb2/3)O3-0.28PbTiO3. J Electron Mater. 2011;40(92):92–96.
   Google Scholar
• Li S, Jiang WH, Zheng LM, et al. A face-shear mode single crystal ultrasonic motor. Appl Phys Lett. 2013;102(18):183512.
   Web of Science ®Google Scholar
• Kim K, Zhang SJ, Jiang XN. Surface load induced electrical impedance shift in relaxor-PbTiO 3 crystal piezoelectric resonators. Appl Phys Lett. 2012;100(25):253501.
   Web of Science ®Google Scholar
• Dong SX, Yan L, Wang N, et al. A small, linear, piezoelectric ultrasonic cryomotor. Appl Phys Lett. 2005;86(5):53501.
   Web of Science ®Google Scholar
• Dong SX, Yan L, Viehland D, et al. A piezoelectric single crystal traveling wave step motor for low temperature application. Appl Phys Lett. 2008;92(15):153504.
   Web of Science ®Google Scholar
• Chen Z, Song L, Zhao H, et al. Temperature- and electric field-dependence of polarization hysteresis for a [001]c poled PMN-PT single crystal. J.Asian.Ceram.Soc. 2022;10(1):203–214.
   Web of Science ®Google Scholar
• Le PG, Pham TL, Nguyen DT, et al. Solid state crystal growth of single crystals of 0.75(Na1/2Bi1/2)TiO3-0.25SrTiO3 and their characteristic electrical properties. J.Asian.Ceram.Soc. 2020;1–12. DOI:10.1080/21870764.2020.1847426
   Web of Science ®Google Scholar
• Wu DH, Chien WT, Yang CJ, et al. Coupled-field analysis of piezoelectric beam actuator using FEM. Sens Actuators A. 2005;118(1):171–176.
   Google Scholar
• Di Gaeta A, Glielmo L, Giglio V, et al. Modeling of an electromechanical engine valve actuator based on a hybrid analytical–FEM approach. IEEE ASME Trans Mechatron. 2008;13(6):625–637.
   Web of Science ®Google Scholar
• Liao X, Qiu Z, Jiang T. Functional piezocrystal characterisation under varying conditions. Materials. 2015;8(12):8304–8326.
   PubMed Web of Science ®Google Scholar
• Kim YS, Park JH, Lee J, et al. Effect of measuring method on the evaluation of piezoelectric and dielectric properties of PMN-PT single crystal. J. Microelectron. Packag. Soc. 2019;26(4):69–74.
   Google Scholar
• Li S, Zheng L, Jiang W, et al. Characterization of full set material constants of piezoelectric materials based on ultrasonic method and inverse impedance spectroscopy using only one sample. J Appl Phys. 2013;114(10). DOI:10.1063/1.4821107
   Web of Science ®Google Scholar
• Perez N, Andrade M, Buiochi F, et al. Identification of elastic, dielectric, and piezoelectric constants in piezoceramic disks. IEEE Trans Ultrason Ferroelectr Freq Control. 2010;57(12):2772.
   PubMed Web of Science ®Google Scholar
• Wang HF, Cao W. Determination of full set material constants from phase velocities. J Appl Phys. 2002;92(8):4578.
   Web of Science ®Google Scholar
• Joo H, Lee C, Rho J, et al. Identification of material constants for piezoelectric transformers by three-dimensional, finite-element method and a design-sensitivity method. IEEE Trans Ultrason Ferroelectr Freq Control. 2003;50(8):965.
   PubMed Web of Science ®Google Scholar
• Rupitsch S, Lerch R. Inverse method to estimate material parameters for piezoceramic disc actuators. Appl Phys A. 2009;97(4):735.
   Web of Science ®Google Scholar
• Zhu S, Jiang B, Cao W. Characterization of piezoelectric materials using ultrasonic and resonant techniques. Proc SPIE. 1998;3341(154). DOI:10.1117/12.307996
   Google Scholar
• Lee HY. Development of high-performance piezoelectric single crystals by using solid-state single crystal growth (SSCG) method. Handbook of Advanced Dielectric, Piezoelectric and Ferroelectric Materials. 2008;158–172. DOI:10.1533/9781845694005.1.158
   Google Scholar
• Zhang S, Li F, Jiang X, et al. Advantages and challenges of relaxor-PbTiO3 ferroelectric crystals for electroacoustic transducers – a review. Pro Mater Sci. 2015;68:1–66.
   PubMed Web of Science ®Google Scholar
• IEEE standard on piezoelectricity. ANSI/IEEE Standard. 1987; 176. doi: 10.1109/IEEESTD.1988.79638.
   Google Scholar
• Joh C, Kim J, Roh Y. Determination of the complex material constants of PMN–28%PT piezoelectric single crystals. Smart Mater Struct. 2013;22(12):125027.
   Web of Science ®Google Scholar
• Zhang S, Li F. High performance ferroelectric relaxor-PbTiO3 single crystals: status and perspective. J Appl Phys. 2012;111(3):031301.
   Web of Science ®Google Scholar
• Liao X, Qiu Z, Jiang T, et al. Functional piezocrystal characterisation under varying conditions. Materials. 2015;8(12):8304–8326.
   PubMed Web of Science ®Google Scholar
• Pérez N, Buiochi F, Brizzotti Andrade M, et al. Numerical characterization of piezoceramics using resonance curves. Materials. 2016;9(2):71.
   PubMed Web of Science ®Google Scholar
• Kaltenbacher B, Kaltenbacher M, Lerch R, et al. “Identification of material tensors for piezoceramic materials” 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No. 00CH37121), October 22-25, 2000. San Juan, Puerto Rico (n.d.). DOI: 10.1109/ultsym.2000.921501
   Google Scholar
• Joo HW, Lee CH, Rho JS, et al. Identification of material constants for piezoelectric transformers by three-dimensional, finite-element method and a design-sensitivity method. IEEE Trans Ultrason Ferroelectr Freq Control. 2003;50(8):965–971.
   PubMed Web of Science ®Google Scholar
• Pérez N, Buiochi F, Brizzotti Andrade M, et al. Numerical characterization of piezoceramics using resonance curves. Materials. 2016;9(2):71.
   PubMed Web of Science ®Google Scholar
• COMSOL Multiphysics® v. 6.0. Stockholm, Sweden: COMSOL AB; 2021. www.comsol.com
   Google Scholar