Yttria-stabilized tetragonal zirconia prepared using gel casting and two-stage sintering

References

• Evans AG, Charles EA. Fracture toughness determinations by indentation. J Am Ceram Soc. 1976;59(7–8):371–372.
   Web of Science ®Google Scholar
• Swain MV. Grain-size dependence of toughness and transformability of 2mol% Y-TZP ceramics. J Mater Sci Lett. 1986;5(11):1159–1162.
   Google Scholar
• Matsui K, Yoshida H, Ikuhara Y. Review: microstructure-development mechanism during sintering in polycrystalline zirconia. Inter Mater Rev. 2018;63(6):375–406.
   Web of Science ®Google Scholar
• Chen IW, Wang XH. Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature. 2000;404(6774):168.
   PubMed Web of Science ®Google Scholar
• Wang XH, Chen PL, Chen IW. Two‐step sintering of ceramics with constant grain‐size, I. Y2O3. J Am Ceram Soc. 2006;89(2):431–437.
   Web of Science ®Google Scholar
• Mazaheri M, Simchi A, Golestani-Fard F. Densification and grain growth of nanocrystalline 3Y-TZP during two-step sintering. J Europ Ceram Soc. 2008;28(15):2933–2939.
   Web of Science ®Google Scholar
• Lourenc MA, Cunto GG, Figueiredo FM, et al. Model of two-step sintering conditions for yttria-substituted zirconia powders. Mater Chem Phys. 2011;126(1–2):262–271.
   Web of Science ®Google Scholar
• Grech J, Antunes E. Optimization of two-step sintering conditions of zirconia blanks for dental restorations. Ceram Int. 2020;46(16):24792–24798.
   Web of Science ®Google Scholar
• Presenda Á, Salvadora MD, Peñaranda-Foixb FL, et al. Effect of microwave sintering on microstructure and mechanical properties in Y-TZP materials used for dental applications. Ceram Int. 2015;41(5):7125–7132.
   Web of Science ®Google Scholar
• Ramesh S, Zulkifli N, Tan CY, et al. Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia. Ceram Int. 2018;44(8):8922–8927.
   Web of Science ®Google Scholar
• Charmond S, Carry CP, Bouvard D. Densification and microstructure evolution of Y-Tetragonal Zirconia Polycrystal powder during direct and hybrid microwave sintering in a single-mode cavity. J Europ Ceram Soc. 2010;30(6):1211–1221.
   Web of Science ®Google Scholar
• Nogueir J, Marina L, Kaizer R, et al. Novel speed sintered zirconia by microwave technology. Dental Mater. 2021;37(5):875–881.
   PubMed Web of Science ®Google Scholar
• Drazin JW, Wollmershauser JA, Ryou H, et al. Pressureless low temperature sintering of nanocrystalline zirconia ceramics via dry powder processing. J Am Ceram Soc. 2020;103(1):60–69.
   Web of Science ®Google Scholar
• Young AC, Omatete OO, Janney MA, et al. Gelcasting of alumina. J Am Ceram Soc. 1991;74(3):612–618.
   Web of Science ®Google Scholar
• Tulliani JM, Bartuli C, Bemporad E, et al. Preparation and mechanical characterization of dense and porous zirconia produced by gel casting with gelatin as a gelling agent. Ceram Int. 2009;35:2481–2491.
   Web of Science ®Google Scholar
• Zhao H, Ye C, Fan Z. A simple and effective method for gel casting of zirconia green bodies using phenolic resin as a binder. J Europ Ceram Soc. 2014;34(5):1457–1463.
   Web of Science ®Google Scholar
• Lee KY, Chen CC, Hsiang HI, et al. Fully sintered alumina with a higher Vickers hardness prepared using a gel-casting process. Int J Appl Ceram Technol. 2019;16(4):1493–1500.
   Web of Science ®Google Scholar
• Liu XG, Li GJ, Tong JF, et al. Low-cost fabrication for ZrO2-based electrolyte thin-substrate by aqueous gel-casting. J Rare Earths. 2004;22:514–516.
   Web of Science ®Google Scholar
• Kastyl J, Stastny P, Chlup Z, et al. Gelcast zirconia ceramics for dental applications combining high strength and high translucency. J Am Ceram Soc. 2022;105(6):3909–3924.
   Web of Science ®Google Scholar
• Xie R, Zhou K, Gan X, et al. Effects of epoxy resin on gelcasting process and mechanical properties of alumina ceramics. J Am Ceram Soc. 2013;96:1107–1112.
   Web of Science ®Google Scholar
• Rao SP, Tripathy SS, Raichur AM. Dispersion studies of sub-micron zirconia using Dolapix CE 64. Colloids Surf A Physicochem Eng Asp. 2007;302(1–3):553–558.
   Web of Science ®Google Scholar
• Toraya H, Yoshimura M, Somiya S. Calibration curve for quantitative analysis of the monoclinic tetragonal ZrO2 system by X-ray diffraction. J Am Ceram Soc. 1984;67:C119–121.
   Web of Science ®Google Scholar
• Anstis GR, Chantikul P, Lawn BR, et al. A critical evaluation of indentation techniques for measuring fracture toughness: i, direct crack measurements. Journal of the American Ceramic Society. 1981;64(9):533–538.
   Web of Science ®Google Scholar
• Liu DM. Rheology of aqueous suspensions containing highly concentrated nano-sized zirconia powders. J Mater Sci Lett. 1998;17(22):1883–1885.
   Google Scholar
• Xie Z, Ma J, Xu Q, et al. Effects of dispersants and soluble counter-ions on aqueous dispersibility of nano-sized zirconia powder. Ceram Int. 2004;30(2):219–224.
   Web of Science ®Google Scholar
• Tang F, Huang X, Zhang Y, et al. Effect of dispersants on surface chemical properties of nano-zirconia suspensions. Ceram Int. 2000;26(1):93–97.
   Web of Science ®Google Scholar
• Sarraf H, Sabet A, Herbig R, et al. Advanced colloidal techniques for characterization of the effect of electrosteric dispersant on the colloidal stability of nanocrystalline ZrO2 suspension. J Ceram Soc Jap. 2009;117(1363):302–307
   Web of Science ®Google Scholar
• Lee KY, Chen CC, Hsiang HI, et al. Effects of glycerol addition on the slurry dispersion and mechanical properties of alumina ceramics prepared by gel-casting process. Ceram Int. 2021;47(14):20260–20267.
   Google Scholar
• Blank WJ, He ZA, Picci M. Catalysis of the epoxy-carboxyl reaction. J Coat Technol. 2002;74(3):33–41.
   Google Scholar
• Kadoma Y, Fujisawa S. Kinetic evaluation of reactivity of bisphenol A derivatives as radical scavengers for methacrylate polymerization. Biomaterials. 2000;21(21):2125–2130.
   PubMed Web of Science ®Google Scholar
• Fujisawa S, Kadoma Y. Action of eugenol as a retarder against polymerization of methyl methacrylate by benzoyl peroxide. Biomaterials. 1997;18(9):701–703.
   PubMed Web of Science ®Google Scholar
• Batch GL, Macosk CW. Oxygen inhibition in differential scanning calorimetry of free radical polymerization. Thermochim Acta. 1990;166:185–198.
   Web of Science ®Google Scholar
• Lóh NJ, Simão L, Jiusti J, et al. Effect of temperature and holding time on the densification of alumina obtained by two-step sintering. Ceram Int. 2017;43(11):8269–8275.
   Web of Science ®Google Scholar
• Yang H, Li L, Li Y, et al. Unveiling exceptional sinterability of ultrafine α-Al2O3 nanopowders. J Materiomics. 2021;7:837–844.
   Web of Science ®Google Scholar
• Soylemez B, Sener E, Yurdakul A, et al. Fracture toughness enhancement of yttria-stabilized tetragonal zirconia polycrystalline ceramics through magnesia-partially stabilized zirconia addition. J Sci Adv Mater Devices. 2020;5:527–534.
   Google Scholar
• Gupta TK, Lange FF, Bechtold JH. Effect of stress induced phase transformation on the properties of polycrystalline zirconia containing metastable tetragonal phase. J Mat Sci. 1978;13(7):1464–1470.
   Google Scholar
• Chevalier J, Gremillard L. Ceramics for medical applications: a picture for the next 20 years. J Eur Ceram Soc. 2009;29(7):1245–1255.
   Web of Science ®Google Scholar
• Zhang X, Liang S, Li H, et al. Mechanical and optical properties of transparent alumina obtained by rapid vacuum sintering. Ceram Int. 2017;43(1):420–426.
   Web of Science ®Google Scholar
• Krell A, Blank P. Grain size dependence of hardness in dense submicrometer alumina. J Am Ceram Soc. 1995;78(4):1118–1120.
   Web of Science ®Google Scholar
• Pande CS, Cooper KP. Nanomechanics of Hall–Petch relationship in nanocrystalline materials. Prog Mat Sci. 2009;54(6):689–706.
   Web of Science ®Google Scholar
• Rice RW, Wu CC, Borchel F. Hardness-grain-size relations in ceramics. J Am Ceram Soc. 1994;77(10):3539–3553.
   Web of Science ®Google Scholar