References
- Wu H, Liu W, He R, et al. Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing. Ceram Int. 2017;43:968–972.
- Schwentenwein M, Homa J. Additive manufacturing of dense alumina ceramics. Int J Appl Ceram Tech. 2015;12:1–7.
- Carloni D, Zhang G, Wu Y. Transparent alumina ceramics fabricated by 3D printing and vacuum sintering. J Eur Ceram Soc. 2021;41:781–791.
- Zhou M, Liu W, Wu H, et al. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography - Optimization of the drying and debinding processes. Ceram Int. 2016;42:11598–11602.
- Mamatha S, Biswas P, Ramavath P, et al. 3D printing of complex shaped alumina parts. Ceram Int. 2018;44:19278–19281.
- Mamatha S, Biswas P, Ramavath P, et al. Effect of parameters on 3D printing of alumina ceramics and evaluation of properties of sintered parts. J Asian Ceram Soc. 2021;9:858–864.
- Mohanty S, Rameshbabu A, Mandal S, et al. Critical issues in near net shape forming via green machining of ceramics: a case study of alumina dental crown. J Asian Ceram Soc. 2013;1:274–281.
- Wu H, Liu W, Lin L, et al. Realization of complex-shaped and high-performance alumina ceramic cutting tools via Vat photopolymerization based 3D printing: a novel surface modification strategy through coupling agents aluminic acid ester and silane coupling agent. J Eur Ceram Soc. 2023;43:1051–1063.
- Lee H, Lee H, Kim K, et al. A Study on the Mechanical Properties of Al2O3 Cutting Tools by DLP-based 3D Printing. J Powder Mater. 2019;26:508–514.
- Chen Z, Li Z, Li J, et al. 3D printing of ceramics: a review. J Eur Ceram Soc. 2019;39:661–687.
- Song X, Chen Y, Lee T, et al. Ceramic fabrication using Mask-Image-Projection-based Stereolithography integrated with tape-casting. J Manuf Process. 2015;20:456–464.
- Zhang K, Xie C, Wang G, et al. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing. Ceram Int. 2019;45:203–208.
- Liu X, Zou B, Xing H, et al. The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing. Ceram Int. 2020;46:937–944.
- Zheng T, Wang W, Sun J, et al. Development and evaluation of Al2O3–ZrO2 composite processed by digital light 3D printing. Ceram Int. 2020;46:8682–8688.
- Xing Z, Zhou H, Liu W, et al. Efficient cleaning of ceramic green bodies with complex architectures fabricated by stereolithography-based additive manufacturing via high viscoelastic paste. Addit Manuf. 2022;55:102809.
- Lin L, Wu H, Ni P, et al. Additive manufacturing of complex-shaped and high-performance aluminum nitride-based components for thermal management. Addit Manuf. 2022;52:102671.
- Liu Y, Zhan L, Wen L, et al. Effects of particle size and color on photocuring performance of Si3N4 ceramic slurry by stereolithography. J Eur Ceram Soc. 2021;41:2386–2394.
- He R, Zhou N, Zhang K, et al. Progress and challenges towards additive manufacturing of SiC ceramic. J Adv Ceram. 2021;10:637–674.
- Zhang K, He R, Ding G, et al. Effects of fine grains and sintering additives on stereolithography additive manufactured Al2O3 ceramic. J Eur Ceram Soc. 2021;47:2303–2310.
- Li Y, Wang M, Wu H, et al. Cure behavior of colorful ZrO2 suspensions during Digital light processing (DLP) based stereolithography process. J Eur Ceram Soc. 2019;39:4921–4927.
- Xing H, Zou B, Lai Q, et al. Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent. Powder Technol. 2018;338:153–161.
- Lutov V. Selecting the optimum size of chip-breaking grooves. Mach Tool. 1962;33:27–30.
- Sisoev V. Fundamentals of Metal Cutting and Cutting Tools. Moscow: Mashgiz; 1962.
- Worthington B. The effect of rake face configuration on the curvature of the chip in metal cutting. Int J Mach Tool Manu. 1975;15:223–239.
- Worthington B. The operation and performance of a groove-type chip forming device. Int J Prod Res. 1976;14:529–558.
- EVans A, EA C. Fracture Toughness Determinations By Identation. 1976;59:371–372.
- Xie Z. Structural Ceramics Tsinghua. Beijing: Tsinghua University Press. 2011;19–24.
- Ezugwu E. Key improvements in the machining of difficult-to-cut aerospace superalloys. Int J Mach Tool Manu. 2005;45:1353–1367.
- Wu W, Xin Z. Metal cutting principle and tools. Beijing: National Defense Industry Press. 2009;64–65.