605
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Microstructure and mechanical properties of SiO2-Al2O3-CaO-ZrO2 based glazes containing zircon and diopside phases

&
Pages 365-376 | Received 14 Feb 2023, Accepted 02 Jun 2023, Published online: 11 Jun 2023

References

  • Boudeghdegh K, Diella V, Bernasconi A, et al. Composition effects on the whiteness and physical-mechanical properties of traditional sanitary-ware glaze. J Eur Ceram Soc. 2015;35(13):3735–3741. DOI:10.1016/j.jeurceramsoc.2015.05.003
  • Rho Y, Kang S, Kim J, et al. Study on crystallization of the glaze for tiles by substitution of TiO 2 , Al 2 O 3 and ZrO 2 nucleating agents. J Nanosci Nanotechnol. 2020;20(1):557–563. DOI:10.1166/jnn.2020.17292
  • Gajek M, Partyka J, Rapacz-Kmita A, et al. Development of anorthite based white porcelain glaze without ZrSiO4 content. Ceram Int. 2017;43(2):1703–1709. DOI:10.1016/j.ceramint.2016.08.140
  • Gol F, Saritas ZG, Cıbuk S, et al. Coloring effect of iron oxide content on ceramic glazes and their comparison with the similar waste containing materials. Ceram Int. 2022;48(2):2241–2249. DOI:10.1016/j.ceramint.2021.10.001
  • Yu Y, Su H, Peng C, et al. Submicro-zirconia crystal-intergrown zircon opaque glaze. J Eur Ceram Soc. 2019;39(2–3):652–659. DOI:10.1016/j.jeurceramsoc.2018.09.044
  • Casasola R, Rincón JM, Romero M. Glass-ceramic glazes for ceramic tiles: a review. J Mater Sci. 2012;47(2):553–582. DOI:10.1007/s10853-011-5981-y.
  • Cai J, Lu M, Guan K, et al. Effect of ZnO/MgO ratio on the crystallization and optical properties of spinel opaque glazes. J Am Ceram Soc. 2018;101(4):1754–1764. DOI:10.1111/jace.15321
  • Melchiades FG, Rego BT, Higa SM, et al. Factors affecting glaze transparency of ceramic tiles manufactured by the single firing technique. J Eur Ceram Soc. 2010;30(12):2443–2449. DOI:10.1016/j.jeurceramsoc.2010.04.030
  • Gajek M, Partyka J, Leśniak M, et al. Gahnite white colour glazes in ZnO–R2O–RO–Al2O3–SiO2 system. Ceram Int. 2018;44(13):15845–15850. DOI:10.1016/j.ceramint.2018.05.265
  • Wang S, Peng C, Huang Z, et al. Clustering of zircon in raw glaze and its influence on optical properties of opaque glaze. J Eur Ceram Soc. 2014;34(2):541–547. DOI:10.1016/j.jeurceramsoc.2013.08.018
  • Selby JH, Strydom R. The effect of manufacturing variables on radiation doses from porcelain tiles. Health Phys. 2008;94(6):539–547. DOI:10.1097/01.HP.0000308503.41839.34.
  • Muzakky HP, Taftazani A, Taftazani A, et al. Reduction of UO2 and ThO2 content in zircon mineral from Bangka Region using calcium borate and hydrochloric acid. J Indian Chem Soc. 2022;99(3):100371. DOI:10.1016/j.jics.2022.100371
  • Abo-Elmagd M. Radon exhalation rates corrected for leakage and back diffusion – Evaluation of radon chambers and radon sources with application to ceramic tile. J Radiat Res Appl Sci. 2014;7(4):390–398. DOI:10.1016/j.jrras.2014.07.001.
  • Tarhan M. Whiteness improvement of porcelain tiles incorporated with anorthite and diopside phases. J Therm Anal Calorim. 2019;138(1):929–936. DOI:10.1007/s10973-019-08268-8.
  • Suvaci E, Yildiz B. Roles of CaO, MgO and SiO2 on crystallization and microstructure development in diopside-based glass-ceramic glazes under industrial fast-firing condition. J Aust Ceram Soc. 2019;53(1):75–81. DOI:10.1007/s41779-016-0011-9.
  • Gajek M, Rapacz-Kmita A, Stodolak-Zych E, et al. Microstructure and mechanical properties of diopside and anorthite glazes with high abrasion resistance. Ceram Int. 2022;48(5):6792–6798. DOI:10.1016/j.ceramint.2021.11.230
  • Li B, Guo Y, Fang J. Effect of MgO addition on crystallization, microstructure and properties of glass-ceramics prepared from solid wastes. J Alloys Compd. 2021;881(10):159821. DOI:10.1016/j.jallcom.2021.159821.
  • Eppler RA, Obstler M. Understanding Glazes. USA: Wiley-American ceramic society; 2005.
  • Pei F, Guo H, Li P, et al. Influence of low magnesia content on the CaO-Al2O3-SiO2 glass-ceramics: its crystallization behaviour, microstructure and physical properties. Ceram Int. 2018;44(16):20132–20139. DOI:10.1016/j.ceramint.2018.07.306
  • Pina R, Esteban A, Bartolome JF, et al. High wear resistance white ceramic glaze containing needle like zircon single crystals by the addition of sepiolite n-ZrO2. J Eur Ceram Soc. 2013;33(15–16):3379–3385. DOI:10.1016/j.jeurceramsoc.2013.05.033
  • Fuertes V, Cabrera MJ, Seores J, et al. Enhanced wear resistance of engineered glass-ceramic by nanostructured self-lubrication. Mater Des. 2019;168(15):106723. DOI:10.1016/j.matdes.2019.107623
  • Topateş G, Alici B, Tarhan B, et al. The effect of zircon particle size on the surface properties of sanitaryware glaze. Mater Res Express. 2020;7(1):015203. DOI:10.1088/2053-1591/ab657d
  • Bajpai S, Gupta A, Pradhan SK, et al. Crack propagation resistance of α-Al2O3 reinforced pulsed laser-deposited hydroxyapatite coating on 316 stainless steel. JOM. 2014;66(10):2095–2107. DOI:10.1007/s11837-014-1152-3
  • Low ZH, Chen SK, Ismail I, et al. Structural transformations of mechanically induced top-down approach BaFe12O19 nanoparticles synthesized from high crystallinity bulk materials. J Magn Magn Mater. 2017;429(1):192–202. DOI:10.1016/j.jmmm.2017.01.036
  • Yekta BE, Alizadeh P, Rezazadeh L. Floor tile glass-ceramic glaze for improvement of glaze surface properties. J Eur Ceram Soc. 2006;26(16):3809–3812. DOI:10.1016/j.jeurceramsoc.2005.12.016.
  • Dongfeng H, Chong G, Jiangtao P, et al. Preparation of glass-ceramics with diopside as the main crystalline phase from low and medium titanium-bearing blast furnace slag. Ceram Int. 2018;44(2):1384–1393. DOI:10.1016/j.ceramint.2017.09.019
  • Ashouri Rad B, Alizadeh P. Pressureless sintering and mechanical properties of SiO2-Al2O3-MgO-K2O-TiO2-F(CaO-Na2O) machinable glass-ceramics. Ceram Int. 2009;35(7):2775–2780. DOI:10.1016/j.ceramint.2009.03.027.
  • Ma J, Chen CZ, Wang DG, et al. Effect of MgO addition on the crystallization and in vitro bioactivity of glass ceramics in the CaO-MgO-SiO2-P2O5 system. Ceram Int. 2012;38(8):6677–6684. DOI:10.1016/j.ceramint.2012.05.056
  • Wahsh MMS, Bakare SB, Bakr IM, et al. Physico-mechanical properties and microstructure of multi-phase ceramic composites based on zircon and dolomite mixtures. Main Gr Chem. 2020;19(4):305–314. DOI:10.3233/MGC-200966
  • Das K, Raha S, Chakraborty D, et al. Effect of nucleating agents on the crystallization and microstructural characteristics of blast furnace slag derived glass-ceramics. Trans Indian Ceram Soc. 2012;71(3):137–142. DOI:10.1080/0371750X.2012.738482
  • Banijamali S. Preparation of glass-ceramic glazes for fast firing applications by CaF2 substitution with B2O3 in the CaO-CaF2-Al2O3-SiO2 system. Ceram Int. 2013;39(8):8815–8822. DOI:10.1016/j.ceramint.2013.04.069.
  • Weiwei Z, Haifeng J, He Z, et al. Effect of TiO2 and CaF2 on the crystallization behavior of Y2O3-Al2O3-SiO2 glass ceramics. Ceram Int. 2018;44(6):6653–6658. DOI:10.1016/j.ceramint.2018.01.076
  • Svahn F, Kassman-Rudolphi Å, Wallén E. The influence of surface roughness on friction and wear of machine element coatings. Wear. 2003;254(11):1092–1098. DOI:10.1016/S0043-1648(03)00341-7.
  • Kanaga KS, Bruck AL, Sriram S, et al. Friction and wear behavior of ultra-high molecular weight polyethylene as a function of polymer crystallinity. Acta Biomater. 2008;4(5):1401–1410. DOI:10.1016/j.actbio.2008.02.022
  • Zhenzhen Z, Jiawen G, Yali S, et al. Effects of crystal refining on wear behaviors and mechanical properties of lithium disilicate glass-ceramics. J Mech Behav Biomed Mater. 2018;81:52–60. DOI:10.1016/j.jmbbm.2018.02.023
  • Sheikhattar M, Attar H, Sharafi S, et al. Influence of surface crystallinity on the surface roughness of different ceramic glazes. Mater Charact. 2016;118:570–574. DOI:10.1016/j.matchar.2016.07.003
  • Platova RA, Platov YT. Whiteness and gloss evaluation of porcelain. Glas Ceram. 2017;74(3–4):91–94. DOI:10.1007/s10717-017-9935-y.
  • Yanmei L, Jinliang T, Jiao S, et al. Removing polysaccharides-and saccharides-related coloring impurities in alkyl polyglycosides by bleaching with the H2O2/TAED/NaHCO3 system. Carbohydr Polym. 2014;112(4):416–421. DOI:10.1016/j.carbpol.2014.05.065
  • Pekkan K, Karasu B. Zircon-free frits suitable for single fast-firing opaque wall tile glazes and their industrial productions. J Eur Ceram Soc. 2009;29(9):1571–1578. DOI:10.1016/j.jeurceramsoc.2008.10.010.
  • Atkinson I, Smith ME, Zaharescu M. Examining correlations between composition, structure and properties in zircon-containing raw glazes. Ceram Int. 2012;38(3):1827–1833. DOI:10.1016/j.ceramint.2011.10.007.
  • Hu AM, Li M, Mao DL. Growth behavior, morphology and properties of lithium aluminosilicate glass ceramics with different amount of CaO, MgO and TiO2 additive. Ceram Int. 2008;34(6):1393–1397. DOI:10.1016/j.ceramint.2007.03.032.
  • Benkacem S, Boudeghdegh K, Zehani F, et al. Effect of ZrSiO4/ZnO ratio on the properties of opaque glazes used in ceramic sanitary ware industry. Iran J Mater Sci Eng. 2020;17(2):104–115.