References
- Chang KH. Investigation of the exerting force of disc springs in affecting the clamping effectiveness of cutting tool under influences of temperature and high rotation speed for high-speed air bearing spindle systems [ Master thesis]. Department of Mechanical Engineering, Yuan Ze University; 2008.
- Li JY. An investigation in operation characteristics of aerostatic spindle with supply air pressure and environment temperature [ Master thesis]. Department of Mechanical Engineering, Chung Yuan Christian University; 2008.
- Hsiao HL. A study of the high-speed spindles compensation for the dynamic axial error [ Master thesis]. Department of Mechanical Engineering, National Chung Hsing University; 2011.
- Hung CW. A study of dynamic axial error measurement and modeling of the high speed spindle [ Master thesis]. Department of Mechanical Engineering, National Chung Hsing University; 2012.
- Wang YN. Design and implementation of motor control and monitoring system for high speed spindle [ Master thesis]. Department of Electrical Engineering, Southern Taiwan University of Science and Technology; 2013.
- Chuang PH. Automatic inspection system for rotary axes of the precision cutter grinder [ Master thesis]. Department of Mechanical Engineering, National Yunlin University of Science and Technology; 2006.
- Liu WL. Method for measuring dynamic error of 5-axis CNC machine tools’ rotary axes [ Master thesis]. Department of Power Mechanical Engineering, National Tsing Hua University; 2002.
- Wang CC, Yau HT. Bifurcation analysis of bearing number in ultra short gas bearing system. Smart Sci. 2013;1:18–24. doi:10.1080/23080477.2013.11665582.
- Wang CC, Yau HT, Wang CC, et al. Chaotic and subharmonic motion analysis of floating ring gas bearing system by hybrid numerical method. Math. Probl. Eng. 2013; Article ID 145716:1–14. doi:10.1155/2013/145716.
- Tzeng SC, Jeng TM, Ma WP, et al. Numerical simulation and flow behaviors of Taylor flow in co-axial rotating cylinder. Int. J. Eng. Technol. Innovation. 2014;4:69–76.
- Jeng TM, Tzeng SC, Xu R, et al. Heat transfer characteristics of a rotating cylinder with a lateral air impinging jet. Int. J. Heat Mass Transfer. 2014;70:235–249. doi:10.1016/j.ijheatmasstransfer.2013.10.069.
- Jeng TM, Tzeng SC, Su HM, et al. Heat transfer characteristics of a rotating Al-foam cylinder under the confined/unconfined impinging jet. Int. J. Therm. Sci. 2013;66:71–81. doi:10.1016/j.ijthermalsci.2012.11.002.
- Jeng TM, Tzeng SC, Chang HL, et al. Flow visualization in an annulus between co-axis rotating cylinders with a circular jet on stationary outer cylinder. Int. Comm. Heat Mass Transfer. 2012;39:1119–1124. doi:10.1016/j.icheatmasstransfer.2012.07.001.
- Lin ZG. The rotary drum with temperature detector and the relevant temperature measurement method. Patent of ROC, I327955. 2008.
- Yada Y, Yada T. Installation configuration of thermocouple temperature detector for the high-viscosity material mixing machine. Patent of ROC, I503528. 2012.
- Chen YR. Temperature conversion and adjustment device for the rotating shaft. Patent of ROC, M505365. 2015.
- Moroi M, Kikuchi H, Koakutsu M, et al. Temperature measurement device, temperature measurement method, memory media and heat treatment device. Patent of ROC, I488248. 2015.