References
- Buenviaje B., Bischoff J. E., Roncace R. A., & Willy C. J. (2016). Mahalanobis-Taguchi system to identify preindicators of delirium in the ICU. IEEE Journal of Biomedical and Health Informatics, 20(4), 1205–1212. https://doi.org/https://doi.org/10.1109/JBHI.2015.2434949
- Chang Z. P., & Cheng L. S. (2015). Multi-attribute decision making method based on Mahalanobis-Taguchi system and fuzzy integral. Journal of Industrial Engineering and Engineering Management, 29(3), 107–115. https://doi.org/https://doi.org/10.13587/j.cnki.jieem.2015.03.012
- Chang Z. P., Cheng L. S., & Cui L. Z. (2016). Interval Choquet fuzzy integral multi-attribute decision making method based on Mahalanobis-Taguchi system. Control and Decision, 31(1), 180–186. https://doi.org/https://doi.org/10.13195/j.kzyjc.2014.1488
- Chang Z. P., Li Y. W., & Fatima N. (2019). A theoretical survey on Mahalanobis-Taguchi system. Measurement, 136, 501–510. https://doi.org/https://doi.org/10.1016/j.measurement.2018.12.090
- Chen J. X., Cheng L. S., Yu H., & Hu S. L. (2018). Rolling bearing fault diagnosis and health assessment using EEMD and the adjustment Mahalanobis-Taguchi system. International Journal of Systems Science, 49(1), 147–159. https://doi.org/https://doi.org/10.1080/00207721.2017.1397804
- Chen W. C., & Kurniawan D. (2014). Process parameters optimization for multiple quality characteristics in plastic injection molding using Taguchi method, BPNN, GA, and hybrid PSO-GA. International Journal of Precision Engineering and Manufacturing, 15(8), 1583–1593. https://doi.org/https://doi.org/10.1007/s12541-014-0507-6
- Cudney E. A., Jugulum R., & Paryani K. (2009). Forecasting consumer satisfaction for vehicle ride using a multivariate measurement system. International Journal of Industrial and Systems Engineering, 4(6), 683–696. https://doi.org/https://doi.org/10.1504/IJISE.2009.026771
- Cudney E. A., Ragsdell K. M., & Paryani K. (2008). Identifying useful variables for vehicle braking using the adjoint matrix approach to the Mahalanobis-Taguchi system. International Journal of Industrial and Systems Engineering, 1(4), 281–292. https://doi.org/https://doi.org/10.4271/2007-01-0554
- Das P., & Datta S. (2012). Developing an unsupervised classification algorithm for characterization of steel properties. International Journal of Quality and Reliability Management, 29(4), 368–383. https://doi.org/https://doi.org/10.1108/02656711211224839
- Das P., & Mukherjee S. (2009). An unsupervised classification scheme for multi-class problems including feature selection based on MTS philosophy. International Journal of Industrial and Systems Engineering, 4(6), 665–682. https://doi.org/https://doi.org/10.1504/IJISE.2009.026770
- Deepa N., & Ganesan K. (2016). Mahalanobis-Taguchi system based criteria selection tool for agriculture crops. Sādhanā, 41(12), 1407–1414. https://doi.org/https://doi.org/10.1007/s12046-016-0569-5
- El-Banna M. (2015). A novel approach for classifying imbalance welding data: Mahalanobis genetic algorithm (MGA). International Journal of Advanced Manufacturing Technology, 77(1-4), 407–425. https://doi.org/https://doi.org/10.1007/s00170-014-6428-9
- El-Banna M. (2017). Modified Mahalanobis Taguchi system for imbalance data classification. Computational Intelligence and Neuroscience, 2017, 5874896. https://doi.org/https://doi.org/10.1155/2017/5874896
- Foster C. R., Jugulum R., & Freay D. D. (2009). Evaluating an adaptive one-factor-at-a-time search procedure within the Mahalanobis-Taguchi system. International Journal of Industrial and Systems Engineering, 4(6), 600–614. https://doi.org/https://doi.org/10.1504/IJISE.2009.026766
- Gao Z. Y., Wang R. X., Jiang H. Q., Gao J. M., & Dong R. G. (2017). Coupling analysis-based false monitoring information identification of production system in process industry. Science China-Technological Sciences, 60(6), 807–817. https://doi.org/https://doi.org/10.1007/s11431-016-9032-7
- Gu Y. P., Cheng L. S., & Chang Z. P. (2019). Classification of imbalanced data based on MTS-CBPSO method: A case study of financial distress prediction. Journal of Information Processing System, 15(3), 682–693. https://doi.org/https://doi.org/10.3745/JIPS.04.0119
- Hsiao Y. H., & Su C. T. (2009). Multiclass MTS for saxophone timbre quality inspection using waveform-shape-based features. IEEE Transactions on Systems Man and Cybernetics Part B-Cybernetics, 39(3), 690–704. https://doi.org/https://doi.org/10.1109/TSMCB.2008.2008632
- Hsiao Y. H., Su C. T., & Fu P. C. (2019). Integrating MTS with bagging strategy for class imbalance problems. International Journal of Machine Learning and Cybernetics, Advance online publication. https://doi.org/https://doi.org/10.1007/s13042-019-01033-1
- Huang C. Y. (2010). Reducing solder paste inspection in surface-mount assembly through Mahalanobis-Taguchi analysis. IEEE Transactions on Electronics Packaging Manufacturing, 33(4), 265–274. https://doi.org/https://doi.org/10.1109/TEPM.2010.2055873
- Huang C. L., Chen Y. H., & Wan T. L. J. (2012). The mahalanobis taguchi system–adaptive resonance theory neural network algorithm for dynamic product designs. Journal of Information and Optimization Sciences, 33(6), 623–635. https://doi.org/https://doi.org/10.1080/02522667.2012.10700163
- Huh D. A., Lim H. L., Sohn J. R., Byeon S. H., Jung S., Lee W. K., & K. W. Moon (2018). Development of a screening method for health hazard ranking and scoring of chemicals using the Mahalanobis-Taguchi system. International Journal of Environmental Research and Public Health, 15, 2208. https://doi.org/https://doi.org/10.3390/ijerph15102208
- Hwang I. J., & Park G. J. (2011). A multi-objective optimization using distribution characteristics of reference data for reverse engineering. International Journal for Numerical Methods in Engineering, 85(10), 1323–1340. https://doi.org/https://doi.org/10.1002/nme.3029
- Iquebal A. S., Pal A., Ceglarek D., & Tiwari M. K. (2014). Enhancement of Mahalanobis-Taguchi system via rough sets based feature selection. Expert Systems with Applications, 41(17), 8003–8015. https://doi.org/https://doi.org/10.1016/j.eswa.2014.06.019
- Ji C. M., Liang X. Q., Peng Y., Zhang Y. K., Yan X. R., & J. J. Wu (2020). Multi-dimensional interval number decision model based on Mahalanobis-Taguchi system with grey entropy method and its application in reservoir operation scheme selection. Water, 12, 685. https://doi.org/https://doi.org/10.3390/w12030685
- Jin X. H., & Chow T. W. S. (2013). Anomaly detection of cooling fan and fault classification of induction motor using Mahalanobis-Taguchi system. Expert Systems with Applications, 40(15), 5787–5795. https://doi.org/https://doi.org/10.1016/j.eswa.2013.04.024
- Jin X. H., Ma E. W. M., Cheng L. L., & Pecht M. (2012). Health monitoring of cooling fans based on Mahalanobis distance with mRMR feature selection. IEEE Transactions on Instrumentation and Measurement, 61(8), 2222–2229. https://doi.org/https://doi.org/10.1109/TIM.2012.2187240
- Ketkar M., & Vaidya O. S. (2014). Evaluating and ranking candidates for MBA program: Mahalanobis Taguchi system approach. Procedia Economics and Finance, 11, 654–664. https://doi.org/https://doi.org/10.1016/S2212-5671(14)00231-7
- Kim C. W., Chang K. C., Kitauchi S., & McGetrick P. J. (2016). A field experiment on a steel Gerber-truss bridge for damage detection utilizing vehicle-induced vibrations. Structural Health Monitoring, 15(2), 174–192. https://doi.org/https://doi.org/10.1177/1475921715627506
- Kumar S., Chow T. W. S., & Pecht M. (2010). Approach to fault identification for electronic products using Mahalanobis distance. IEEE Transactions on Instrumentation and Measurement, 59(8), 2055–2064. https://doi.org/https://doi.org/10.1109/TIM.2009.2032884
- Lee Y. C., & Teng H. L. (2009). Predicting the financial crisis by Mahalanobis-Taguchi system–Examples of Taiwan's electronic sector. Expert Systems with Applications, 36(4), 7469–7478. https://doi.org/https://doi.org/10.1016/j.eswa.2008.09.037
- Li Q., Yan C. F., Wang W., Babiker A., & Wu L. X. (2019). Health indicator construction based on MD-CUMSUM with multi-domain features selection for rolling element bearing fault diagnosis. IEEE Access, 7, 138528–138540. https://doi.org/https://doi.org/10.1109/Access.6287639
- Lim H. L., Huh E. H., Huh D. A., Sohn J. R., & Moon K. W. (2019). Priority setting for the management of chemicals using the globally harmonized system and multivariate analysis: use of the Mahalanobis-Taguchi system. International Journal of Environmental Research and Public Health, 16(17), 3119. https://doi.org/https://doi.org/10.3390/ijerph16173119
- Liparas D., Angelis L., & Feldt R. (2012). Applying the Mahalanobis-Taguchi strategy for software defect diagnosis. Automated Software Engineering, 19(2), 141–165. https://doi.org/https://doi.org/10.1007/s10515-011-0091-2
- Liparas D., Dimitriadis S. I., Laskaris N. A., Tzelepi A., Charalambous K., & Angelis L. (2014). Exploiting the temporal patterning of transient VEP signals: A statistical single-trial methodology with implications to brain-computer interfaces (BCIs). Journal of Neuroscience Method, 232, 189–198. https://doi.org/https://doi.org/10.1016/j.jneumeth.2014.04.032
- Liparas D., Laskaris N., & Angelis L. (2013). Incorporating resting state dynamics in the analysis of encephalographic responses by means of the Mahalanobis-Taguchi strategy. Expert Systems with Applications, 40(7), 2621–2630. https://doi.org/https://doi.org/10.1016/j.eswa.2012.11.014
- Lu B. T. (2011). Statistical approaches for assessment of water corrosivity. Corrosion Engineering Science and Technology, 46(5), 651–656. https://doi.org/https://doi.org/10.1179/147842210X12695149034016
- Mahalakshmi P., & Ganesan K. (2009). Mahalanobis Taguchi system based criteria selection for shrimp aquaculture development. Computers and Electronics in Agriculture, 65(2), 192–197. https://doi.org/https://doi.org/10.1016/j.compag.2008.09.003
- Miki S., Hasegawa T., Umemura S., Otsuka Y., Matsuki H., Tsunoda S., & Inujima H. (2008). Remaining service life diagnostic technology of phenol insulators for circuit breakers. IEEE Transactions on Dielectrics and Electrical Insulation, 15(2), 476–483. https://doi.org/https://doi.org/10.1109/TDEI.2008.4483467
- Mohan D., Saygin C., & Sarangapani J. (2008). Real-time detection of grip length deviation during pull-type fastening: A Mahalanobis-Taguchi system (MTS)-based approach. International Journal of Advanced Manufacturing Technology, 39(9–10), 995–1008. https://doi.org/https://doi.org/10.1007/s00170-007-1280-9
- Mota-Gutiérrez C. G., Reséndiz-Flores E. O., & Reyes-Carlos Y. I. (2018). Mahalanobis-Taguchi system: state of the art. International Journal of Quality and Reliability Management, 35(3), 596–613. https://doi.org/https://doi.org/10.1108/IJQRM-10-2016-0174
- Niu J. L., & Cheng L. S. (2012). Development of a methodology for imbalanced data classification using improved Mahalanobis-Taguchi system. Jonrnal of Industrial Engineering and Engineering Management, 26(2), 85–93. https://doi.org/https://doi.org/10.3969/j.issn.1004-6062.2012.02.012
- Niu G., Singh S., Holland S. W., & Pecht M. (2011). Health monitoring of electronic products based on Mahalanobis distance and Weibull decision metrics. Microelectronics Reliability, 51(2), 279–284. https://doi.org/https://doi.org/10.1016/j.microrel.2010.09.009
- Pal A., & Maiti J. (2010). Development of a hybrid methodology for dimensionality reduction in Mahalanobis-Taguchi system using Mahalanobis distance and binary particle swarm optimization. Expert Systems with Applications, 37(2), 1286–1293. https://doi.org/https://doi.org/10.1016/j.eswa.2009.06.011
- Pan J. N., Pan J., & Lee C. Y. (2009). Finding and optimising the key factors for the multiple-response manufacturing process. International Journal of Production Research, 47(9), 2327–2344. https://doi.org/https://doi.org/10.1080/00207540701777423
- Peng C. F., Ho L. H., Tsai S. B., Hsiao Y. C., Zhai Y. M., Chen Q., & Shang Z. W. (2017). Applying the Mahalanobis-Taguchi system to improve tablet PC production processes. Sustainability, 9(9), 1557. https://doi.org/https://doi.org/10.3390/su9091557
- Rai B. K. (2008). Prediction of drill-bit breakage from degradation signals using Mahalanobis-Taguchi system analysis. International Journal of Industrial and Systems Engineering, 3(2), 134–148. https://doi.org/https://doi.org/10.1504/IJISE.2008.016741
- Ramlie F., Jamaludin K., Dolah R., & Wan Muhamad W. Z. A. (2016). Optimal feature selection of Taguchi character recognition in the Mahalanobis-Taguchi system using bees algorithm. Global Journal of Pure and Applied Mathematics, 12(3), 2651–2671.
- Reséndiz-Flores E. O., Navarro-Acosta J. A., & Hernández-Martínez A. (2020). Optimal feature selection in industrial foam injection processes using hybrid binary particle swarm optimization and gravitational search algorithm in the Mahalanobis-Taguchi system. Soft Computing, 24, 341–349. https://doi.org/https://doi.org/10.1007/s00500-019-03911-w
- Reséndiz E., Moncayo-Martínez L. A., & Solís G. (2013). Binary ant colony optimization applied to variable screening in the Mahalanobis-Taguchi system. Expert Systems with Application, 40(2), 634–637. https://doi.org/https://doi.org/10.1016/j.eswa.2012.07.058
- Reséndiz E., & Rull-Flores C. A. (2013). Mahalanobis-Taguchi system applied to variable selection in automotive pedals components using Gompertz binary particle swarm optimization. Expert Systems with Applications, 40(7), 2361–2365. https://doi.org/https://doi.org/10.1016/j.eswa.2012.10.049
- Reyes-Carlos Y. I., Mota-Gutiérrez C. G., & Reséndiz-Flores E. O. (2018). Optimal variable screening in automobile motor-head machining process using metaheuristic approaches in the Mahalanobis-Taguchi system. International Journal of Advanced Manufacturing Technolog, 95(9-12), 3589–3597. https://doi.org/https://doi.org/10.1007/s00170-017-1348-0
- Rizal M., Ghani J. A., Nuawi M. Z., & Haron C. H. C. (2017). Cutting tool wear classification and detection using multi-sensor signals and Mahalanobis-Taguchi system. Wear, 376–37, 1759–1765. https://doi.org/https://doi.org/10.1016/j.wear.2017.02.017
- Sakeran H., Abu Osman N. A., & Majid M. S. A. (2019). Gait classification using Mahalanobis-Taguchi system for health monitoring systems following anterior cruciate ligament reconstruction. Applied Sciences, 9, 3306. https://doi.org/https://doi.org/10.3390/app9163306
- Shakya P., Kulkarni M. S., & Darpe A. K. (2015). Bearing diagnosis based on Mahalanobis-Taguchi-Gram-Schmidt method. Journal of Sound and Vibration, 337, 342–362. https://doi.org/https://doi.org/10.1016/j.jsv.2014.10.034
- Soylemezoglu A., Jagannathan S., & Saygin C. (2011). Mahalanobis-Taguchi system as a multi-sensor based decision making prognostics tool for centrifugal pump failures. IEEE Transactions on Reliability, 60(4), 864–878. https://doi.org/https://doi.org/10.1109/TR.2011.2170255
- Su C. T., & Hsiao Y. H. (2007). An evaluation of the robustness of MTS for imbalanced data. IEEE Transactions on Knowledge and Data Engineering, 19(10), 1321–1332. https://doi.org/https://doi.org/10.1109/TKDE.2007.190623
- Su C. T., & Hsiao Y. H. (2009). Multiclass MTS for simultaneous feature selection and classification. IEEE Transactions on Knowledge and Data Engineering, 21(2), 192–20. https://doi.org/https://doi.org/10.1109/TKDE.2008.128
- Su C. T., Wang P. C., Chen Y. C., & Chen L. F. (2012). Data mining techniques for assisting the diagnosis of pressure ulcer development in surgical patients. Journal of Medical Systems, 36(4), 2387–2399. https://doi.org/https://doi.org/10.1007/s10916-011-9706-1
- Taguchi G. (2000). New trends in multivariate diagnosis. Sankhyā: The Indian Journal of Statistics, Series B, 62(2), 233–248. https://www.jstor.org/stable/25053133
- Taguchi G., Chowdhury S., & Wu Y. (2001). The Mahalanobis-Taguchi system. New York: McGraw-Hill.
- Taguchi G., & Jugulum S. (2002). The Mahalanobis-Taguchi strategy: A pattern technology system. New York: John Wiley & Sons.
- Wang H. J., Huo N., Li J. H., Wang K., & Wang Z. X. (2018). A road quality detection method based on the Mahalanobis-Taguchi system. IEEE Access, 6, 29078–29087. https://doi.org/https://doi.org/10.1109/Access.6287639
- Wang N., Wang Z. P., Jia L. M., Qin Y., Chen X. N., & Y. K. Zuo (2019). Adaptive multiclass Mahalanobis Taguchi system for bearing fault diagnosis under variable conditions. Sensors, 19(1), 26. https://doi.org/https://doi.org/10.3390/s19010026
- Woodall W. H., Koudelik R., Tsui K. L., Kim S. B., Stoumbos Z. G., & Carvounis C. P. (2003). A review and analysis of the Mahalanobis-Taguchi system. Technometrics, 45(1), 1–15. https://doi.org/https://doi.org/10.1198/004017002188618626
- Yang T., & Cheng Y. T. (2010). The use of Mahalanobis-Taguchi system to improve flip-chip bumping height inspection efficiency. Microelectronics Reliability, 50(3), 407–414. https://doi.org/https://doi.org/10.1016/j.microrel.2009.12.001
- Yazid A. M., Rijal J. K., Awaluddin M. S., & Sari E. (2015). Pattern recognition on remanufacturing automotive component as support decision making using Mahalanobis-Taguchi system. Procedia CIRP, 26, 258–263. https://doi.org/https://doi.org/10.1016/j.procir.2014.07.025
- Ye F. Y., Shan M. Y., Han Z. J., & Zhou Y. J. (2018). The Industry operation quality evaluation research based on MTS and data environment analysis. Chinese Journal of Management, 15(5), 767–773. https://doi.org/https://doi.org/10.3969/j.issn.1672-884x.2018.05.017
- Yuan J., & Li C. (2017). A new method for multi-attribute decision making with intuitionistic trapezoidal fuzzy random variable. International Journal of Fuzzy Systems, 19(1), 15–26. https://doi.org/https://doi.org/10.1007/s40815-016-0184-y
- Zhan J., Chen W., Cheng L. S., Wang Q., Han F. F., & Cui Y. B. (2020). Diagnosis of asthma based on routine blood biomarkers using machine learning. Computational Intelligence and Neuroscience, 2020, 8841002. https://doi.org/https://doi.org/10.1155/2020/8841002