Wear conduct of aluminum matrix composites: A parametric strategy using Taguchi based GRA integrated with weight method

References

• Adamiak, M. (2006). Selected properties of the aluminum alloy base composites reinforced with intermetallic particles. Journal of Achievements in Materials and Manufacturing Engineering , 14 (1–2), 43–47.
   Google Scholar
• Adebisi, A. A. , Maleque, M. A. , Ali, M. Y. , & Bello, K. A. (2016). Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces , 23 (6), 533–547.10.1080/09276440.2016.1167414
   Web of Science ®Google Scholar
• Alaneme, K. K. , & Aluko, A. O. (2012). Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063)–silicon carbide particulate composites. Scientia Iranica , 19 (4), 992–996.10.1016/j.scient.2012.06.001
   Web of Science ®Google Scholar
• Ambigai, R. , & Prabhu, S. (2017).  Optimization of friction and wear behavior of Al–Si3N4 nano composite and Al–Gr–Si3N4 hybrid composite under dry sliding conditions. Transactions of Nonferrous Metals Society of China , 27 (5), 986–997.10.1016/S1003-6326(17)60116-X
   Web of Science ®Google Scholar
• Çaydaş, U. , & Hasçalık, A. (2008). Use of the grey relational analysis to determine optimum laser cutting parameters with multi-performance characteristics. Optics & Laser Technology , 40 (7), 987–994.
   Web of Science ®Google Scholar
• Deng, J. L. (1982). Control problems of grey systems. Sys. & Contr. Lett. , 1 (5), 288–294.
   Web of Science ®Google Scholar
• East, W. F. (1988). Metal-matrix composites take-off. Materials Engineering , 1988 , 33–36.
   Google Scholar
• Hashim, J. , Looney, L. , & Hashmi, M. S. J. (1999). Metal matrix composites: Production by the stir casting method. Journal of Materials Processing Technology , 92 , 1–7.10.1016/S0924-0136(99)00118-1
   Web of Science ®Google Scholar
• Ipek, R. (2005). Adhesive wear behaviour of B 4 C and SiC reinforced 4147 Al matrix composites (Al/B 4 C-Al/SiC). Journal of Materials Processing Technology , 162 , 71–75.10.1016/j.jmatprotec.2005.02.207
   Web of Science ®Google Scholar
• Iwai, Y. , Yoneda, H. , & Honda, T. (1995). Sliding wear behavior of SiC whisker-reinforced aluminum composite. Wear , 181 , 594–602.10.1016/0043-1648(95)90175-2
   Web of Science ®Google Scholar
• İzciler, M. , & Muratoglu, M. (2003). Wear behavior of SiC reinforced 2124 Al alloy composite in RWAT system. Journal of Materials Processing Technology , 132 (1–3), 67–72.10.1016/S0924-0136(02)00263-7
   Web of Science ®Google Scholar
• Kandpal, B. C. , Kumar, J. , & Singh, H. (2017). Optimization and characterization of EDM of AA 6061/10% Al2O3 AMMC using Taguchi’s approach and utility concept. Production & Manufacturing Research , 5 (1), 351–370.10.1080/21693277.2017.1389315
   Web of Science ®Google Scholar
• Kerti, I. , & Toptan, F. (2008). Microstructural variations in cast B 4 C-reinforced aluminium matrix composites (AMCs). Materials Letters , 62 (8), 1215–1218.10.1016/j.matlet.2007.08.015
   Web of Science ®Google Scholar
• Khan, K. B. , Kutty, T. R. G. , & Surappa, M. K. (2006). Hot hardness and indentation creep study on Al–5% Mg alloy matrix–B4C particle reinforced composites. Materials Science and Engineering: A , 427 (1–2), 76–82.10.1016/j.msea.2006.04.015
   Web of Science ®Google Scholar
• Kök, M. (2011). Computational investigation of testing parameter effects on abrasive wear behavior of AL 2 O 3 particle-reinforced MMCS using statistical analysis. The International Journal of Advanced Manufacturing Technology , 52 (1–4), 207–215.
   Web of Science ®Google Scholar
• Kumar, M. , & Singh, H. (2016). Multi-response optimization in wire electrical discharge machining of Inconel X-750 using Taguchi’s technique and grey relational analysis. Cogent Engineering , 3 (1), 1266123.
   Web of Science ®Google Scholar
• Lee, K. B. , Ahn, J. P. , & Kwon, H. (2001). Characteristics of AA6061/BN composite fabricated by pressureless infiltration technique. Metallurgical and Materials Transactions A , 32 (4), 1007–1018.10.1007/s11661-001-0358-5
   Web of Science ®Google Scholar
• López, V. H. , Scoles, A. , & Kennedy, A. R. (2003). The thermal stability of TiC particles in an Al7wt.% Si alloy. Materials Science and Engineering: A , 356 (1–2), 316–325.10.1016/S0921-5093(03)00143-6
   Web of Science ®Google Scholar
• Modi, O. P. (2001). Two-body abrasion of a cast Al–Cu (2014 Al) alloy–Al2O3 particle composite: Influence of heat treatment and abrasion test parameters. Wear , 248 (1-2), 100–111.10.1016/S0043-1648(00)00534-2
   Web of Science ®Google Scholar
• Montgomery, D. C. (2001). Design and analysis of experiments (pp. 64–65). New York: John Wiley & Sons.
   Google Scholar
• Olofsson, J. , Grehk, T. M. , Berlind, T. , Persson, C. , Jacobson, S. , & Engqvist, H. (2012). Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement. Biomatter , 2 (2), 1–9.
   PubMedGoogle Scholar
• Rajeswari, B. , Amirthagadeswaran, K. S. , & Anbarasu, K. G. (2015). Investigation on mechanical properties of aluminum 7075-silicon carbide-alumina hybrid composite using Taguchi method. Australian Journal of Mechanical Engineering , 13 (2), 127–135.10.7158/M13-051.2015.13.2
   Web of Science ®Google Scholar
• Sahoo, P. , & Pal, S. K. (2007). Tribological performance optimization of electroless Ni–P coatings using the Taguchi method and grey relational analysis. Tribology Letters , 28 (2), 191–201.10.1007/s11249-007-9264-3
   Web of Science ®Google Scholar
• Sevik, H. , & Kurnaz, S. C. (2006). Properties of alumina particulate reinforced aluminum alloy produced by pressure die casting. Materials & Design , 27 (8), 676–683.10.1016/j.matdes.2005.01.006
   Web of Science ®Google Scholar
• Singla, Y. K. , Chhibber, R. , Bansal, H. , & Kalra, A. (2015). Wear behavior of aluminum alloy 6061-based composites reinforced with SiC, Al2O3, and Red Mud: A comparative study. JOM Journal of the Minerals Metals and Materials Society , 67 (9), 2160–2169.10.1007/s11837-015-1365-0
   Web of Science ®Google Scholar
• Suresha, S. , & Sridhara, B. K. (2010). Wear characteristics of hybrid aluminum matrix composites reinforced with graphite and silicon carbide particulates. Composites Science and Technology , 70 (11), 1652–1659.10.1016/j.compscitech.2010.06.013
   Web of Science ®Google Scholar
• Tokaji, K. (2005). Effect of stress ratio on fatigue behavior in SiC particulate-reinforced aluminum alloy composite. Fatigue & Fracture of Engineering Materials & Structures , 28 (6), 539–545.10.1111/ffe.2005.28.issue-6
   Web of Science ®Google Scholar
• Xu, J. , & Kato, K. (2000). Formation of a tribochemical layer of ceramics sliding in water and its role for low friction. Wear , 245 , 61–75.10.1016/S0043-1648(00)00466-X
   Web of Science ®Google Scholar
• Yu, S. Y. , Ishii, H. , Tohgo, K. , Cho, Y. T. , & Diao, D. (1997). Temperature dependence of sliding wear behavior in SiC whisker or SiC particulate reinforced 6061 aluminum alloy composite. Wear , 213 (1–2), 21–28.10.1016/S0043-1648(97)00207-X
   Web of Science ®Google Scholar
• Zhang, S. L. , Yang, J. , Zhang, B. R. , Zhao, Y. T. , Chen, G. , Shi, X. X. , & Liang, Z. P. (2015). A novel fabrication technology of in situ TiB 2/6063Al composites: High energy ball milling and melt in situ reaction. Journal of Alloys and Compounds , 639 , 215–223.10.1016/j.jallcom.2015.03.156
   Web of Science ®Google Scholar