Properties of alkali-activated concrete (AAC) incorporating demolished building waste (DBW) as aggregates

References

• ASTM C. (2012). Standard test methods for chemical resistance of mortars, grouts, and monolithic surfacings and polymer concretes. ASTM International.
   Google Scholar
• Coelho, A., & de Brito, J. (2012). Influence of construction and demolition waste management on the environmental impact of buildings. Waste Management, 32(3), 532–14. https://doi.org/10.1016/j.wasman.2011.11.011
   Web of Science ®Google Scholar
• Deb, P. S., Nath, P., & Sarker, P. K. (2014). The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature. Materials & Design, 62, 32–39. https://doi.org/10.1016/j.matdes.2014.05.001
   Web of Science ®Google Scholar
• Etxeberria, M., Vázquez, E., Marí, A., & Barra, M. (2007). Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cement and Concrete Research, 37(5), 735–742. https://doi.org/10.1016/j.cemconres.2007.02.002
   Web of Science ®Google Scholar
• Fernando, P. T., & Said, J. (2011). Resistance to acid attack, abrasion and leaching behavior of alkali-activated mine waste binders. Materials and Structures, 44(2), 487–498. https://doi.org/10.1617/s11527-010-9643-3
   Web of Science ®Google Scholar
• Hardjito, D., & Rangan, B. V. (2005). Development and properties of low calcium fly ash-based geopolymer Concrete. Curtin University of Technology.
   Google Scholar
• Hossiney, N., Sepuri, H. K., Mohan, M. K., Arjun, H. R., Govindaraju, S., & Chyne, J. (2020a). Alkali-activated concrete paver blocks made with recycled asphalt pavement (RAP) aggregates. Case Studies in Construction Materials, 12, e00322. https://doi.org/10.1016/j.cscm.2019.e00322
   Google Scholar
• Hossiney, N., Sepuri, H. K., Mohan, M. K., Chandra, S. K., Kumar, S. L., & Thejas, H. K. (2020b). Geopolymer concrete paving blocks made with Recycled Asphalt Pavement (RAP) aggregates towards sustainable urban mobility development. Cogent Engineering, 7(1), 1824572. https://doi.org/10.1080/23311916.2020.1824572
   Google Scholar
• Hu, Y., Tang, Z., Li, W., Li, Y., & Tam, V. W. Y. (2019). Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates. Construction and Building Materials, 226, 139–151. https://doi.org/10.1016/j.conbuildmat.2019.07.211
   Web of Science ®Google Scholar
• IS: 10262 . (2009). Indian standard for concrete mix proportioning – guidelines. Bureau of Indian Standards.
   Google Scholar
• IS: 1199. (1959). India standard methods of sampling and analysis of concrete. Bureau of Indian Standards.
   Google Scholar
• IS: 2386 Part I. (1963). Indian standard methods of test for aggregates for concrete, part I particle size and shape. Bureau of Indian Standards.
   Google Scholar
• IS: 2386 Part III. (1963). Indian standard methods of test for aggregates for concrete, part III specific gravity, density, voids, absorption, and bulking. Bureau of Indian Standards.
   Google Scholar
• IS: 2386 Part IV. (1963). Indian standard methods of test for aggregates for concrete, part IV mechanical properties. Bureau of Indian Standards.
   Google Scholar
• IS: 516. (1959). Indian standard methods of tests for strength of concrete. Bureau of Indian Standards.
   Google Scholar
• IS: 5816. (1999). Indian standard for splitting tensile strength of concrete – method of test. Bureau of Indian Standards.
   Google Scholar
• Kathirvel, P., & Mohan, K. S. R. (2017). Influence of recycled concrete aggregates on the engineering and durability properties of alkali activated slag concrete. Construction and Building Materials, 133, 65–72. https://doi.org/10.1016/j.conbuildmat.2016.12.050
   Web of Science ®Google Scholar
• Komnitsas, K., Zaharaki, D., Vlachou, A., Bartzas, G., & Galetakis, M. (2015). Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers. Advanced Powder Technology, 26(2), 368–376. https://doi.org/10.1016/j.apt.2014.11.012
   Web of Science ®Google Scholar
• Leite, F. C., Motta, R. S., Vasconcelos, K. L., & Bernucci, L. (2011). Laboratory evaluation of recycled construction and demolition waste for pavements. Construction and Building Materials, 25(6), 2972–2979. https://doi.org/10.1016/j.conbuildmat.2010.11.105
   Web of Science ®Google Scholar
• Lin, K. L., Wu, H. H., Shie, J. L., Hwang, C. L., & Cheng, A. (2010). Recycling waste brick from construction and demolition of buildings as pozzolanic materials. Waste Management & Research, 28(7), 653–659. https://doi.org/10.1177/0734242X09358735
   Web of Science ®Google Scholar
• Nath, P., & Sarker, P. K. (2014). Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition. Construction and Building Materials, 66, 163–171. https://doi.org/10.1016/j.conbuildmat.2014.05.080
   Web of Science ®Google Scholar
• Nuaklong, P., Sata, V., & Chindaprasirt, P. (2016). Influence of recycled aggregate on fly ash geopolymer concrete properties. Journal of Cleaner Production, 112(4), 2300–2307. https://doi.org/10.1016/j.jclepro.2015.10.109
   Web of Science ®Google Scholar
• Panizza, M., Natali, M., Garbin, E., Tamburini, S., & Secco, M. (2018). Assessment of geopolymers with Construction and Demolition Waste (CDW) aggregates as a building material. Construction and Building Materials, 181, 119–133. https://doi.org/10.1016/j.conbuildmat.2018.06.018
   Web of Science ®Google Scholar
• Perez, I., Pasandin, A. R., & Gallego, J. (2012). Stripping in hot mix asphalt produced by aggregates from construction and demolition waste. Waste Management & Research, 30(1), 3–11. https://doi.org/10.1177/0734242X10375747
   PubMed Web of Science ®Google Scholar
• Poon, C. S., & Chan, D. (2006a). Paving blocks made with recycled concrete aggregate and crushed clay brick. Construction and Building Materials, 20(8), 569–577. https://doi.org/10.1016/j.conbuildmat.2005.01.044
   Web of Science ®Google Scholar
• Poon, C. S., & Chan, D. (2006b). Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base. Construction and Building Materials, 20(8), 578–585. https://doi.org/10.1016/j.conbuildmat.2005
   Google Scholar
• Poon, C. S., Kou, S. C., & Lam, L. (2002). Use of recycled aggregates in molded concrete bricks and block. Construction and Building Materials, 16(5), 281–289. https://doi.org/10.1016/S0950-0618(02)00019-3
   Web of Science ®Google Scholar
• Poon, C. S., Kou, S. C., Wan, H. W., & Etxeberria, M. (2009). Properties of concrete blocks prepared with low grade recycled aggregates. Waste Management, 29(8), 2369–2377. https://doi.org/10.1016/j.wasman.2009.02.018
   Web of Science ®Google Scholar
• Prestes, S. M. D., Mancini, S. D., Rodolfo, A., & Keiroglo, R. C. (2012). Construction and demolition waste as a source of PVC for recycling. Waste Management & Research, 30(2), 115–121. https://doi.org/10.1177/0734242X11413329
   PubMed Web of Science ®Google Scholar
• Rodrigues, F., Carvalho, M. T., Evangelista, L., & de Brito, J. (2013). Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants. Journal of Cleaner Production, 52, 438–445. https://doi.org/10.1016/j.jclepro.2013.02.023
   Web of Science ®Google Scholar
• Sales, A., & de Souza, F. R. (2009). Concretes and mortars recycled with water treatment sludge and construction and demolition rubble. Construction and Building Materials, 23(6), 2362–2370. https://doi.org/10.1016/j.conbuildmat.2008.11.001
   Web of Science ®Google Scholar
• Shaikh, F. U. A. (2016). Mechanical and durability properties of fly ash geopolymer concrete containing recycled coarse aggregates. International Journal of Sustainable Built Environment, 5(2), 277–287. https://doi.org/10.1016/j.ijsbe.2016.05.009
   Google Scholar
• Shi, X. S., Collins, F. G., Zhao, X. L., & Wang, Q. Y. (2012). Mechanical properties and microstructure analysis of fly ash geopolymeric recycled concrete. Journal of Hazardous Materials, 237–238, 20–29. https://doi.org/10.1016/j.jhazmat.2012.07.070
   PubMed Web of Science ®Google Scholar
• Silva, R. V., de Brito, J., & Dhir, R. K. (2014). Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production. Construction and Building Materials, 65, 201–217. https://doi.org/10.1016/j.conbuildmat.2014.04.117
   Web of Science ®Google Scholar
• Tang, Z., Hu, Y., Tam, V. W. Y., & Li, W. (2019). Uniaxial compressive behaviors of fly ash/slag-based geopolymeric concrete with recycled aggregates. Cement and Concrete Composites, 104, 103375. https://doi.org/10.1016/j.cemconcomp.2019.103375
   Web of Science ®Google Scholar
• Tang, Z., Li, W., Tam, V. W. Y., & Luo, Z. (2020). Investigation on dynamic mechanical properties of fly ash/slag-based geopolymeric recycled aggregate concrete. Composites Part B: Engineering, 185, 107776. https://doi.org/10.1016/j.compositesb.2020.107776
   Web of Science ®Google Scholar