Advanced search
Publication Cover
Cogent Engineering Volume 9, 2022 - Issue 1
Submit an article Journal homepage
1,719
Views
11
CrossRef citations to date
0
Altmetric
MECHANICAL ENGINEERING

Enhanced thermal performance of tubular heat exchanger using triangular wing vortex generator

Vansh Ratna Sharma1 Department of Mechanical and Industrial Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, 576104IndiaView further author information
,
Sai Sankalp S2 Department of Aeronautical and Automobile Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, India, 576104View further author information
,
Madhwesh N1 Department of Mechanical and Industrial Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, 576104IndiaView further author information
&
Manjunath M S1 Department of Mechanical and Industrial Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, 576104IndiaCorrespondence[email protected]
View further author information
|
D T Pham3 School of Mechanical Engineering, University of Birmingham, BirminghamUnited KingdomView further author information
(Reviewing editor)
Article: 2050021 | Received 06 Dec 2021, Accepted 01 Mar 2022, Published online: 17 Mar 2022

References

  • Bali, T., & Sarac, B. A. (2014, April). Experimental investigation of decaying swirl flow through a circular pipe for binary combination of vortex generators. International Communications in Heat and Mass Transfer, 53, 174–30. https://doi.org/10.1016/j.icheatmasstransfer.2014.02.030
  • Bhuiya, M. M. K., Chowdhury, M. S. U., Saha, M., & Islam, M. T. (2013, August). Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts. International Communications in Heat and Mass Transfer, 46, 49–57. https://doi.org/10.1016/j.icheatmasstransfer.2013.05.012
  • Chamoli, S., Lu, R., & Yu, P. (2017, July). Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts. Applied Thermal Engineering, 121, 1117–1134. https://doi.org/10.1016/j.applthermaleng.2017.03.145
  • Chokphoemphun, S., Pimsarn, M., Thianpong, C., & Promvonge, P. (2015, April). Heat transfer augmentation in a circular tube with winglet vortex generators. Chinese Journal of Chemical Engineering, 23(4), 605–614. https://doi.org/10.1016/j.cjche.2014.04.002
  • Chompookham, T., Chingtuaythong, W., & Chokphoemphun, S. (2022, January). Influence of a novel serrated wire coil insert on thermal characteristics and air flow behavior in a tubular heat exchanger. International Journal of Thermal Sciences, 171, 107184. https://doi.org/10.1016/j.ijthermalsci.2021.107184
  • Dang, W., & Wang, L.-B. (2021, April). Convective heat transfer enhancement mechanisms in circular tube inserted with a type of twined coil. International Journal of Heat and Mass Transfer, 169, 120960. https://doi.org/10.1016/j.ijheatmasstransfer.2021.120960
  • Eiamsa-ard, S., Pethkool, S., Thianpong, C., & Promvonge, P. (2008, February). Turbulent flow heat transfer and pressure loss in a double pipe heat exchanger with louvered strip inserts. International Communications in Heat and Mass Transfer, 35(2), 120–129. https://doi.org/10.1016/j.icheatmasstransfer.2007.07.003
  • Eiamsa-ard, S., & Promvonge, P. (2006, May). Experimental investigation of heat transfer and friction characteristics in a circular tube fitted with V-nozzle turbulators. International Communications in Heat and Mass Transfer, 33(5), 591–600. https://doi.org/10.1016/j.icheatmasstransfer.2006.02.022
  • Gururatana, S., Prapainop, R., Chuepeng, S., & Skullong, S. (2021, August). Development of heat transfer performance in tubular heat exchanger with improved NACA0024 vortex generator. Case Studies in Thermal Engineering, 26, 101166. https://doi.org/10.1016/j.csite.2021.101166
  • Hakim, M. U., Hridoy, M. W., Islam, M. I., & Rayhan, M. S., “Numerical study of heat transfer enhancement through a circular tube fitted with and without rectangular cut twisted tape insert,” IOP Conference Series: Materials Science and Engineering Nov 5-6 Jaipur, India, vol. 1017 (IOP Publishing Ltd), p. 012019, January. 2021, https://doi.org/10.1088/1757-899X/1017/1/012019.
  • Huang, W.-C., Chen, C.-A., Shen, C., & San, J.-Y. (2015, November). Effects of characteristic parameters on heat transfer enhancement of repeated ring-type ribs in circular tubes. Experimental Thermal and Fluid Science, 68, 371–380. https://doi.org/10.1016/j.expthermflusci.2015.06.007
  • Ibrahim, M. M., Essa, M. A., & Mostafa, N. H. (2019, March). A computational study of heat transfer analysis for a circular tube with conical ring turbulators. International Journal of Thermal Sciences, 137, 138–160. https://doi.org/10.1016/j.ijthermalsci.2018.10.028
  • Keklikcioglu, O., & Ozceyhan, V. (2018, February). Experimental investigation on heat transfer enhancement in a circular tube with equilateral triangle cross sectioned coiled-wire inserts. Applied Thermal Engineering, 131, 686–695. https://doi.org/10.1016/j.applthermaleng.2017.12.051
  • Kongkaitpaiboon, V., Nanan, K., & Eiamsa-ard, S. (2010a, May). Experimental investigation of heat transfer and turbulent flow friction in a tube fitted with perforated conical-rings. International Communications in Heat and Mass Transfer, 37(5), 560–567. https://doi.org/10.1016/j.icheatmasstransfer.2009.12.015
  • Kongkaitpaiboon, V., Nanan, K., & Eiamsa-ard, S. (2010b, May). Experimental investigation of convective heat transfer and pressure loss in a round tube fitted with circular-ring turbulators. International Communications in Heat and Mass Transfer, 37(5), 568–574. https://doi.org/10.1016/j.icheatmasstransfer.2009.12.016
  • Lei, Y., Zheng, F., Song, C., & Lyu, Y. (2017, August). Improving the thermal hydraulic performance of a circular tube by using punched delta-winglet vortex generators. International Journal of Heat and Mass Transfer, 111, 299–311. https://doi.org/10.1016/j.ijheatmasstransfer.2017.03.101
  • Lin, Z.-M., Wang, L.-B., Lin, M., Dang, W., & Zhang, Y.-H. (2017, March). Numerical study of the laminar flow and heat transfer characteristics in a tube inserting a twisted tape having parallelogram winglet vortex generators. Applied Thermal Engineering, 115, 644–658. https://doi.org/10.1016/j.applthermaleng.2016.12.142
  • Liu, P., Zheng, N., Shan, F., Liu, Z., & Liu, W. (2018, December). Heat transfer enhancement for laminar flow in a tube using bidirectional conical strip inserts. International Journal of Heat and Mass Transfer, 127, 1064–1076. https://doi.org/10.1016/j.ijheatmasstransfer.2018.07.128
  • M.s, M., Fernandes, D. V., & Pham, D. T. (2021, January). Numerical investigation of heat transfer and friction factor characteristics of circular tube fitted with an array of semi-elliptical vortex generator inserts. Cogent Engineering, 8(1). https://doi.org/10.1080/23311916.2021.1968742
  • Man, C., Lv, X., Hu, J., Sun, P., & Tang, Y. (2017, March). Experimental study on effect of heat transfer enhancement for single-phase forced convective flow with twisted tape inserts. International Journal of Heat and Mass Transfer, 106, 877–883. https://doi.org/10.1016/j.ijheatmasstransfer.2016.10.026
  • Nakhchi, M. E., & Esfahani, J. A. (2019, June). Numerical investigation of different geometrical parameters of perforated conical rings on flow structure and heat transfer in heat exchangers. Applied Thermal Engineering, 156, 494–505. https://doi.org/10.1016/j.applthermaleng.2019.04.067
  • Nakhchi, M. E., Esfahani, J. A., & Kim, K. C. (2020, February). Numerical study of turbulent flow inside heat exchangers using perforated louvered strip inserts. International Journal of Heat and Mass Transfer, 148, 119143. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119143
  • Nanan, K., Pimsarn, M., Jedsadaratanachai, W., & Eiamsa-ard, S. (2013, November). Heat transfer augmentation through the use of wire-rod bundles under constant wall heat flux condition. International Communications in Heat and Mass Transfer, 48, 133–140. https://doi.org/10.1016/j.icheatmasstransfer.2013.08.021
  • Nanan, K., Thianpong, C., Pimsarn, M., Chuwattanakul, V., & Eiamsa-ard, S. (2017, March). Flow and thermal mechanisms in a heat exchanger tube inserted with twisted cross-baffle turbulators. Applied Thermal Engineering, 114, 130–147. https://doi.org/10.1016/j.applthermaleng.2016.11.153
  • Pimsarn, M., Samruaisin, P., Eiamsa-ard, P., Koolnapadol, N., Promthaisong, P., & Eiamsa-ard, S. (2021, December). Enhanced forced convection heat transfer of a heat exchanger tube utilizing serrated-ring turbulators. Case Studies in Thermal Engineering, 28, 101570. https://doi.org/10.1016/j.csite.2021.101570
  • Pourhedayat, S., Pesteei, S. M., Ghalinghie, H. E., Hashemian, M., & Ashraf, M. A. (2020, April). Thermal-exergetic behavior of triangular vortex generators through the cylindrical tubes. International Journal of Heat and Mass Transfer, 151, 119406. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119406
  • Pourramezan, M., & Ajam, H. (2016, July). Modeling for thermal augmentation of turbulent flow in a circular tube fitted with twisted conical strip inserts. Applied Thermal Engineering, 105, 509–518. https://doi.org/10.1016/j.applthermaleng.2016.03.029
  • Promvonge, P., Promthaisong, P., & Skullong, S. (2020, April). Experimental and numerical heat transfer study of turbulent tube flow through discrete V-winglets. International Journal of Heat and Mass Transfer, 151, 119351. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119351
  • Promvonge, P., Promthaisong, P., & Skullong, S. (2022, January). Thermal performance augmentation in round tube with louvered V-winglet vortex generator. International Journal of Heat and Mass Transfer, 182, 121913. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121913
  • Promvonge, P., & Skullong, S. (2020, September). Augmented heat transfer in tubular heat exchanger fitted with V-baffled tapes. International Journal of Thermal Sciences, 155, 106429. https://doi.org/10.1016/j.ijthermalsci.2020.106429
  • Promvonge, P., & Skullong, S. (2021, February). Enhanced thermal performance in tubular heat exchanger contained with V-shaped baffles. Applied Thermal Engineering, 185, 116307. https://doi.org/10.1016/j.applthermaleng.2020.116307
  • Ruengpayungsak, K., Wongcharee, K., Thianpong, C., Pimsarn, M., Chuwattanakul, V., & Eiamsa-ard, S. (2017, August). Heat transfer evaluation of turbulent flows through gear-ring elements. Applied Thermal Engineering, 123, 991–1005. https://doi.org/10.1016/j.applthermaleng.2017.05.108
  • Skullong, S., Promvonge, P., Thianpong, C., & Jayranaiwachira, N. (2017, March). Thermal behaviors in a round tube equipped with quadruple perforated-delta-winglet pairs. Applied Thermal Engineering, 115, 229–243. https://doi.org/10.1016/j.applthermaleng.2016.12.082
  • Skullong, S., Promvonge, P., Thianpong, C., Jayranaiwachira, N., & Pimsarn, M. (2018, January). Thermal performance of heat exchanger tube inserted with curved-winglet tapes. Applied Thermal Engineering, 129, 1197–1211. https://doi.org/10.1016/j.applthermaleng.2017.10.110
  • Skullong, S., Promvonge, P., Thianpong, C., & Pimsarn, M. (2016, April). Heat transfer and turbulent flow friction in a round tube with staggered-winglet perforated-tapes. International Journal of Heat and Mass Transfer, 95, 230–242. https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.007
  • Srivastava, G. P., Patil, A. K., & Kumar, M. (2021, August). Heat transfer enhancement and entropy generation analysis of a tube with perforated conical inserts. Experimental Heat Transfer, 1–20. https://doi.org/10.1080/08916152.2021.1958109
  • Wang, Y., Liu, P., Shan, F., Liu, Z., & Liu, W. (2019, February). Effect of longitudinal vortex generator on the heat transfer enhancement of a circular tube. Applied Thermal Engineering, 148, 1018–1028. https://doi.org/10.1016/j.applthermaleng.2018.11.080
  • Wijayanta, A. T., Yaningsih, I., Aziz, M., Miyazaki, T., & Koyama, S. (2018, December). Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger. Applied Thermal Engineering, 145, 27–37. https://doi.org/10.1016/j.applthermaleng.2018.09.009
  • Xu, Y., Islam, M. D., & Kharoua, N. (2017, February). Numerical study of winglets vortex generator effects on thermal performance in a circular pipe. International Journal of Thermal Sciences, 112, 304–317. https://doi.org/10.1016/j.ijthermalsci.2016.10.015
  • Xu, Y., Islam, M. D., & Kharoua, N. (2018, May). Experimental study of thermal performance and flow behaviour with winglet vortex generators in a circular tube. Applied Thermal Engineering, 135, 257–268. https://doi.org/10.1016/j.applthermaleng.2018.01.112
  • Yaningsih, I., Istanto, T., & Wijayanta, A. T., “Experimental study of heat transfer enhancement in a concentric double pipe heat exchanger with different axial pitch ratio of perforated twisted tape inserts 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials, 11–12 November 2015, 1717 (AIP Publishing) Solo, Indonesia,” 2016, p. 030012. https://doi.org/10.1063/1.4943436.
  • Yaningsih, & Wijayanta, A. T. (2017 Concentric tube heat exchanger installed by twisted tapes using various wings with alternate axes International Conference on Engineering, Science and Nanotechnology 2016, 3–5 August 2016, 1788 (AIP Publishing) Solo, Indonesia . pp. 030005). https://doi.org/10.1063/1.4968258
  • Yaningsih, I., Wijayanta, A. T., Miyazaki, T., & Koyama, S. (2018, December). Thermal hydraulic characteristics of turbulent single-phase flow in an enhanced tube using louvered strip insert with various slant angles. International Journal of Thermal Sciences, 134, 355–362. https://doi.org/10.1016/j.ijthermalsci.2018.08.025
  • Zhai, C., Islam, M. D., Alam, M. M., Simmons, R., & Barsoum, I. (2019, May). Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator pairs. Applied Thermal Engineering, 153, 330–340. https://doi.org/10.1016/j.applthermaleng.2019.03.018
  • Zhang, K., Sun, Z., Zheng, N., & Chen, Q. (2020, August). Effects of the configuration of winglet vortex generators on turbulent heat transfer enhancement in circular tubes. International Journal of Heat and Mass Transfer, 157, 119928. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119928

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.