Diameter ratio and friction coefficient effect on equivalent plastic strain (PEEQ) during contact between two brass solids

References

• Achanta, S., Liskiewicz, T., Drees, D., & Celis, J. P. (2009). Friction mechanisms at the micro-scale. Tribology International, 42(11–12), 1792–15. https://doi.org/10.1016/j.triboint.2009.04.018
   Web of Science ®Google Scholar
• Bailey, J. A. (1975). Friction in metal machining—Mechanical aspects. Wear, 31(2), 243–275. https://doi.org/10.1016/0043-1648(75)90161-1
   Web of Science ®Google Scholar
• Birinci, A., Adıyaman, G., Yaylacı, M., & Öner, E. (2015). Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM. Latin American Journal of Solids and Structures, 12(9), 1771–1789. https://doi.org/10.1590/1679-78251574
   Web of Science ®Google Scholar
• Brake, M. R. (2012). An analytical elastic-perfectly plastic contact model. International Journal of Solids and Structures, 49(22), 3129–3141. https://doi.org/10.1016/j.ijsolstr.2012.06.013
   Web of Science ®Google Scholar
• Burbank, J., & Woydt, M. (2016). Optimization of pre-conditioned cold work hardening of steel alloys for friction and wear reductions under slip-rolling contact. Wear, 350-351, 141–154. https://doi.org/10.1016/j.wear.2016.01.011
   Web of Science ®Google Scholar
• Chang, W. R., Etsion, I., & Bogy, D. B. (1987). An elastic-plastic model for the contact of rough surfaces. Journal of Tribology, 109(2), 257–263. https://doi.org/10.1115/1.3261348
   Web of Science ®Google Scholar
• Çömez, İ. (2021). Thermoelastic receding contact problem of a layer resting on a half plane with frictional heat generation. Journal of Thermal Stresses, 44(5), 566–581. https://doi.org/10.1080/01495739.2021.1873082
   Web of Science ®Google Scholar
• Comez, I., & Guler, M. A. (2017). The contact problem of a rigid punch sliding over a functionally graded bilayer. Acta Mechanica, 228(6), 2237–2249. https://doi.org/10.1007/s00707-017-1827-2
   Web of Science ®Google Scholar
• Çömez, İ., & Yilmaz, K. B. (2019). Mechanics of frictional contact for an arbitrary oriented orthotropic material. ZAMM Zeitschrift fur Angew Math und Mech, 99(3), 1–18. https://doi.org/10.1002/zamm.201800084
   Web of Science ®Google Scholar
• Fischer-Cripps, A. C. (2006). Introduction to contact mechanics. 2nd Edition Springer.
   Google Scholar
• Fratini, L., Lo Casto, S., & Lo Valvo, E. (2006). A technical note on an experimental device to measure friction coefficient in sheet metal forming. Journal of Materials Processing Technology, 172(1), 16–21. https://doi.org/10.1016/j.jmatprotec.2005.08.008
   Web of Science ®Google Scholar
• Gaurav, P. C., Prasad Vejendla, S. B., & Prasad Vejendla, S. B. (2022). Deformation and annealing of brass. Materials Today: Proceedings, 64, 1380–1383. https://doi.org/10.1016/j.matpr.2022.04.502
   Google Scholar
• Ghaednia, H., Wang, X., Saha, S., Xu, Y., Sharma, A., & Jackson, R. L. (2017). A review of elastic–plastic contact mechanics. Applied Mechanics Reviews, 69(6). https://doi.org/10.1115/1.4038187
   Web of Science ®Google Scholar
• Greenwood, J. A., & Williamson, J. B. P. (1966). Contact of nominally flat surfaces. Procedding Social London Series A Maths Physics Sciences, 295(1442), 300–319. https://doi.org/10.1098/rspa.1966.0242
   Web of Science ®Google Scholar
• Hu, J., Gao, F., Liu, X., & Wei, Y. (2020). An elasto-plastic contact model for conformal contacts between cylinders. Procedding Institution Mechanical Engineering Part Journal of Engineering Triboly, 234(12), 1837–1845. https://doi.org/10.1177/1350650119896461
   Web of Science ®Google Scholar
• Ismail, R., Prasojo, T., Tauviqirrahman, M., Jamari, J., & Schipper, D. J. (2015). Numerical investigation of the plastic contact deformation between hemispheres: Variation of radii ratio and normal loads. Advanced Materials Research, 1123, 16–19. https://doi.org/10.4028/www.scientific.net/amr.1123.16
   Google Scholar
• Jackson, R. L., & Green, I. (2005). A finite element study of elasto-plastic hemispherical contact against a rigid flat. Journal of Tribology, 127(2), 343–354. https://doi.org/10.1115/1.1866166
   Web of Science ®Google Scholar
• Jamari, J., Ismail, R., Saputra, E., Sugiyanto, S., & Anwar, I. B. (2014). The effect of repeated impingement on UHMWPE material in artificial hip joint during salat activities. Advanced Materials Research, 896(February), 272–275. https://doi.org/10.4028/www.scientific.net/AMR.896.272
   Google Scholar
• Jamari, J., Saputra, E., Ismail, R., Tauviqirrahman, M., and Schipper, D. J., “Effect of geometry on the plastic contact between two hemispheres,” in Proceedings of Malaysian International Tribology Conference, 2015, pp. 76–77.
   Google Scholar
• Jamari, J., & Schipper, D. J. (2006). Experimental investigation of fully plastic contact of a sphere against a hard flat. Journal of Tribology, 128(2), 230–235. https://doi.org/10.1115/1.2164470
   Web of Science ®Google Scholar
• Jamari, J., & Schipper, D. J. (2008). Deterministic repeated contact of rough surfaces. Wear, 264(3–4), 349–358. https://doi.org/10.1016/j.wear.2007.03.024
   Web of Science ®Google Scholar
• Johnson, K. L. (1995). Contact mechanics and the wear of metals. Wear, 190(2), 162–170. https://doi.org/10.1016/0043-1648(95)06665-9
   Web of Science ®Google Scholar
• Johnson, K. L., & Shercliff, H. R. (1992, May). Shakedown of 2-dimensional asperities in sliding contact. International Journal of Mechanical Sciences, 34(5), 375–394. https://doi.org/10.1016/0020-7403(92)90025-C
   Web of Science ®Google Scholar
• Juettner, M., Bartz, M., Tremmel, S., Correns, M., & Wartzack, S. (2022). Edge pressures obtained using FEM and Half-Space: A study of truncated contact ellipses. Lubricants, 10(6), 107–118. https://doi.org/10.3390/lubricants10060107
   Web of Science ®Google Scholar
• Kogut, L., & Etsion, I. (2002). Elastic-plastic contact analysis of a sphere and a rigid flat. Journal of Applied Mechanics, 69(5), 657–662. https://doi.org/10.1115/1.1490373
   Web of Science ®Google Scholar
• Kriflou, T., Rachik, M., Azrar, L., & El Bikri, K. (2021). Numerical simulation of the effects of strain hardening exponent with and without strain rate sensitivity of material on normal elastic plastic impact. Journal of Physics Conference Series, 1888(1), 012015. https://doi.org/10.1088/1742-6596/1888/1/012015
   Google Scholar
• Lamura, M. D. P., Hidayat, T., Ammarullah, M. I., Bayuseno, A. P., & Jamari, J. (2023). Study of contact mechanics between two brass solids in various diameter ratios and friction coefficient. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 146575032211448. https://doi.org/10.1177/14657503221144810
   Web of Science ®Google Scholar
• Latypov, M. I., Alexandrov, I. V., Beygelzimer, Y. E., Lee, S., & Kim, H. S. (2012). Finite element analysis of plastic deformation in twist extrusion. Computational Materials Science, 60, 194–200. https://doi.org/10.1016/j.commatsci.2012.03.035
   Web of Science ®Google Scholar
• Liu, Y., Herrmann, M., Schenck, C., & Kuhfuss, B. (2017). Plastic deformation history in infeed rotary swaging process. Frontiers in Physics, 1896. https://doi.org/10.1063/1.5008093
   Google Scholar
• Li, J., Xi, Y., Tao, Q., Li, Y., & Qu, G. (2019, July). Experimental investigation and numerical simulation of the emergence and development of micro-annulus in shale gas wells subjected to multistage fracturing. J Nat Gas Sci Eng, 78, 103314. https://doi.org/10.1016/j.jngse.2020.103314
   Web of Science ®Google Scholar
• Mars, J., Wali, M., Jarraya, A., Dammak, F., & Dhiab, A. (2015). Finite element implementation of an orthotropic plasticity model for sheet metal in low velocity impact simulations. Thin-Walled Structures, 89, 93–100. https://doi.org/10.1016/j.tws.2014.12.019
   Web of Science ®Google Scholar
• Moshkovich, A., Perfilyev, V., & Rapoport, L. (2019). Effect of plastic deformation and damage development during friction of fcc metals in the conditions of boundary lubrication. Lubricants, 7(5), 45. https://doi.org/10.3390/lubricants7050045
   Web of Science ®Google Scholar
• Muránsky, O., Hamelin, C. J., Patel, V. I., Luzin, V., & Braham, C. (2015). The influence of constitutive material models on accumulated plastic strain in finite element weld analyses. International Journal of Solids and Structures, 69-70, 518–530. https://doi.org/10.1016/j.ijsolstr.2015.04.032
   Web of Science ®Google Scholar
• Öner, E. (2021a). Computational contact mechanics for a medium consisting of functionally graded material coating and orthotropic substrate. Journal of Structural Engineering & Applied Mechanics, 4(4), 249–266. https://doi.org/10.31462/jseam.2021.04249266
   Google Scholar
• Öner, E. (2021b). Two-dimensional frictionless contact analysis of an orthotropic layer under gravity. Journal of Mechanics of Materials and Structures, 16(4), 573–594. https://doi.org/10.2140/jomms.2021.16.573
   Web of Science ®Google Scholar
• Öner, E., & Birinci, A. (2014, Mar). Continuous contact problem for two elastic layers resting on an elastic half-infinite plane. Journal of Mechanics of Materials and Structures, 9(1), 105–119. https://doi.org/10.2140/jomms.2014.9.105
   Web of Science ®Google Scholar
• Öner, E., & Birinci, A. (2020). Investigation of the solution for discontinuous contact problem between a functionally graded (FG) layer and homogeneous half-space. Archive of Applied Mechanics, 90(12), 2799–2819. https://doi.org/10.1007/s00419-020-01750-y
   Web of Science ®Google Scholar
• Oner, E., Yaylaci, M., & Birinci, A. (2015, May). Analytical solution of a contact problem and comparison with the results from FEM. Structural Engineering and Mechanics, 54(4), 607–622. https://doi.org/10.12989/sem.2015.54.4.607
   Web of Science ®Google Scholar
• Öner, E., Yaylaci, M., & Birinci, A. (2014). Solution of a receding contact problem using an analytical method and a finite element method. Journal of Mechanics of Materials and Structures, 9(3), 333–345. https://doi.org/10.2140/jomms.2014.9.333
   Web of Science ®Google Scholar
• Ozsahin, T. S. (2007). Frictionless contact problem for a layer on an elastic half plane loaded by means of two dissimilar rigid punches. Structural Engineering and Mechanics, 25(4), 383–403. https://doi.org/10.12989/sem.2007.25.4.383
   Web of Science ®Google Scholar
• Papangelo, A., Ciavarella, M., & Barber, J. R. (2015). Fracture mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471(2180), 20150271. https://doi.org/10.1098/rspa.2015.0271
   Web of Science ®Google Scholar
• Phokane, T., Gupta, K., & Gupta, M. K. (2018). Investigations on surface roughness and tribology of miniature brass gears manufactured by abrasive water jet machining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(22), 4193–4202. https://doi.org/10.1177/0954406217747913
   Web of Science ®Google Scholar
• Polat, A., Kaya, Y., & Özşahin, T. Ş. (2018). Analytical solution to continuous contact problem for a functionally graded layer loaded through two dissimilar rigid punches. Meccanica, 53(14), 3565–3577. https://doi.org/10.1007/s11012-018-0902-7
   Web of Science ®Google Scholar
• Shankar, S., & Mayuram, M. M. (2008). A finite element based study on the elastic-plastic transition behavior in a hemisphere in contact with a rigid flat. Journal of Tribology, 130(4), 1–6. https://doi.org/10.1115/1.2958081
   Web of Science ®Google Scholar
• Sheng, D., Eigenbrod, K. D., & Wriggers, P. (2005). Finite element analysis of pile installation using large-slip frictional contact. Computers and Geotechnics, 32(1), 17–26. https://doi.org/10.1016/j.compgeo.2004.10.004
   Web of Science ®Google Scholar
• Shi, X., Wu, A., Zhu, C., & Qu, S. (2013). Effects of load configuration on partial slip contact between an elastic–plastic sphere and a rigid flat. Tribology International, 61, 120–128. https://doi.org/10.1016/j.triboint.2012.12.014
   Web of Science ®Google Scholar
• Son, S-B., Lee, Y.K., Suk Hoon Kang, S.H., Hee-Suk Chung, H-S., Cho, J.S., Jeong-Tak Moon, J-T., & Oh, K.H., et al. (2011). A numerical approach on the inclusion effects in ultrafine gold wire drawing process. Engineering Failure Analysis, 18(5), 1272–1278. https://doi.org/10.1016/j.engfailanal.2011.03.015
   Web of Science ®Google Scholar
• Sulaiman, S., Ariffin, M. K. A. M., & Lai, S. Y. (2012). Springback behaviour in sheet metal forming for automotive door. AASRI Procedia, 3, 224–229. https://doi.org/10.1016/j.aasri.2012.11.037
   Google Scholar
• Taylor, R. I. (2022). Rough surface contact modelling—A Review. Lubricants, 10(5), 1–23. https://doi.org/10.3390/lubricants10050098
   Web of Science ®Google Scholar
• Trzepieciński, T., Szewczyk, M., & Szwajka, K. (2022). The use of non-edible green oils to lubricate DC04 steel sheets in sheet metal forming process. Lubricants, 10(9), 210–217. https://doi.org/10.3390/lubricants10090210
   Web of Science ®Google Scholar
• Ünlü, B. S. (2009, Aug). Investigation of tribological and mechanical properties of metal bearings. Bulletin of Materials Science, 32(4), 451–457. https://doi.org/10.1007/s12034-009-0066-0
   Web of Science ®Google Scholar
• Upadhyay, R. K., & Kumar, A. (2019). Boundary lubrication properties and contact mechanism of carbon/MoS 2 based nanolubricants under steel/steel contact. Colloids Interface Sciences Community, 31(February), 100186. https://doi.org/10.1016/j.colcom.2019.100186
   Google Scholar
• Viscusi, A., Bruno, M., Esposito, L., & Testa, G. (2020). An experimental/numerical study of bonding mechanism in cold spray technology for metals. The International Journal, Advanced Manufacturing Technology, 110(9–10), 2787–2800. https://doi.org/10.1007/s00170-020-06060-9
   Web of Science ®Google Scholar
• Wang, Z., Cai, S., Jin, K., Wang, X., & Chen, W. (2020). In-flight aggregation and deposition behaviour of particles in low pressure cold spray. Surface & Coatings Technology, 409(October), 126875. https://doi.org/10.1016/j.surfcoat.2021.126875
   Google Scholar
• Wang, L., & Xiang, Y. (2013). Elastic-plastic contact analysis of a deformable sphere and a rigid flat with friction effect. Advanced Materials Research, 644, 151–156. https://doi.org/10.4028/www.scientific.net/AMR.644.151
   Google Scholar
• Wang, X., Xu, Y., & Jackson, R. L. (2018). Theoretical and finite element analysis of static friction between multi-scale rough surfaces. Tribology Letters, 66(4), 1–18. https://doi.org/10.1007/s11249-018-1099-6
   Web of Science ®Google Scholar
• Xiaotao, G., & Fan, Y. (2012). Research of PEEQ for conical ring with outer steps ring rolling. Physics Procedia, 25, 257–261. https://doi.org/10.1016/j.phpro.2012.03.081
   Google Scholar
• Xie, Z., & Zhu, W. (2021). Theoretical and experimental exploration on the micro asperity contact load ratios and lubrication regimes transition for water-lubricated stern tube bearing. Tribology International, 164(January), 107105. https://doi.org/10.1016/j.triboint.2021.107105
   Google Scholar
• Yaqoob, K., Hashmi, F., & Hassan Tanveer, W. (2022). Failure analysis of cartridge brass shell. Engineering Failure Analysis, 138(April), 106325. https://doi.org/10.1016/j.engfailanal.2022.106325
   Google Scholar
• Yaylaci, M., Adiyaman, G., Oner, E., & Birinci, A. (2021). Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM. Computing Concr, 27(3), 199–210
   Web of Science ®Google Scholar
• Zhang, S., Huan, J., Song, H., Liu, X., & Wei, Y. G. (2019). Plastic effect on the sliding inception between a cylinder and a rigid flat. Acta Mechanica Solida Sinica, 32(1), 1–16. https://doi.org/10.1007/s10338-018-0060-4
   Web of Science ®Google Scholar
• Zhao, Y., Maietta, D. M., & Chang, L. (2000). An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow. Journal of Tribology, 122(1), 86–93. https://doi.org/10.1115/1.555332
   Web of Science ®Google Scholar
• Zheng, J., Shu, X., Wu, Y., Xu, H., Lu, Q., Liao, B., & Zhang B. (2018). Investigation on the plastic deformation during the stamping of ellipsoidal heads for pressure vessels. Thin-Walled Structures, 127, 135–144. https://doi.org/10.1016/j.tws.2018.01.040
   Web of Science ®Google Scholar