Sustainability-driven model for predicting compressive strength in concrete structures

References

• Abrams, L. D. (1919). Properties of concrete (3rd ed.). Pitman Publishing Ltd.
   Google Scholar
• ACI 211.1-91. (1991). Standard practice for selecting proportions for normal, heavyweight, and mass concrete. American Concrete Institute.
   Google Scholar
• ACI 234R-96. (2000). Guide for the use of silica fume in concrete. Manual of concrete practice (pp. 1–51). American Concrete Institute.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2010). Standard specification for air-entraining admixtures for concrete. ASTM C260/C260M.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2014a). Standard test method for sieve analysis of fine and coarse aggregates. ASTM C136/C136M.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2014b). Standard test method for air content of freshly mixed concrete by the pressure method. ASTM C231/C231M.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2015a). Standard test method for relative sensity (specific gravity) and absorption of coarse aggregate. ASTM C127.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2015b). Standard test method for relative density (specific gravity) and absorption of fine aggregate. ASTM C128.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2015c). Standard specification for silica fume used in cementitious mixtures. ASTM C1240.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2015d). Standard specification for chemical admixtures for concrete. ASTM C494/C494M.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2015e). Standard test method for slump of hydraulic-cement concrete. ASTM C143/C143M.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2016a). Making and curing concrete specimens in the laboratory. ASTM C192/C192M.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2016b). Standard specification for Portland cement. ASTM C150/C150M.
   Google Scholar
• American Society for Testing of Materials (ASTM). (2016c). Standard test method for compressive strength of cylindrical specimens. ASTM C39/C39M.
   Google Scholar
• Beek, A., Breugel, K., & Hilhorst, M. A. (1999). Monitoring system for hardening concrete based on dielectric properties. Proceedings of the International Conference Utilizing Ready Mix Concrete and Mortar (pp. 303–312). University of Dundee.
   Google Scholar
• Chidiac, S. E., Moutassem, F., & Mahmoodzadeh, F. (2013). Compressive strength model for concrete. Magazine of Concrete Research, 65(9), 557–572. https://doi.org/10.1680/macr.12.00167
   Web of Science ®Google Scholar
• Chiya, Y., Rahimzadeh, A. S., & Barzinjy, A. A. (2022). Systematic multiscale models to predict the compressive strength of cement paste as a function of microsilica and nanosilica contents, water/cement ratio, and curing ages. Sustainability, 14(3), 1723. https://doi.org/10.3390/su14031723
   Web of Science ®Google Scholar
• de Larrard, F. (1999). Concrete mixture proportioning: A scientific approach. Spon Press.
   Google Scholar
• EPA (Environmental Protection Agency). (2020). Emission factor documentation for AP-42, section 11.6 Portland cement manufacturing, AP 42 - compilation of air pollutant emission factors Vol. I: Stationary point and area sources (5th ed.). Washington, DC, 1994; https://www3.epa.gov/ttn/chief/ap42/ch11/bgdocs/b11s06.pdf (accessed 21 March 2020).
   Google Scholar
• Feret, R. (1892). Sur la compacité des mortiers hydrauliques (On the compactness of hydraulic mortars). Annales Des Ponts et Chaussées, 7(4), 5–164. https://books.google.ae/books/about/Sur_la_compacit%C3%A9_des_mortiers_hydrauliq.html?id=gPmcPQAACAAJ&redir_esc=y
   Google Scholar
• Hooton, R. D., Pun, P., Kojundic, T., & Fidjestol, P. (1997). Influence of silica fume on chloride resistance of concrete. Proceedings of the PCI/FHWA International Symposium on High Performance Concrete (pp. 245–256), New Orleans, LA, USA.
   Google Scholar
• Iftikhar, B., Alih, S. C., Vafaei, M., Javed, M. F., Rehman, M. F., Abdullaev, S. S., Tamam, N., Khan, M. I., & Hassan, A. M. (2023). Predicting compressive strength of eco-friendly plastic sand paver blocks using gene expression and artificial intelligence programming. Scientific Reports, 13(1), 12149. https://doi.org/10.1038/s41598-023-39349-2
   PubMed Web of Science ®Google Scholar
• Jaf, D. K. I., Abdulrahman, P. I., Mohammed, A. S., Kurda, R., Qaidi, S. M. A., & Asteris, P. G. (2023). Machine learning techniques and multi-scale models to evaluate the impact of silicon dioxide (SiO2) and calcium oxide (CaO) in fly ash on the compressive strength of green concrete. Construction and Building Materials, 400, 132604. https://doi.org/10.1016/j.conbuildmat.2023.132604
   Web of Science ®Google Scholar
• Johansen, V., & Andersen, P. J. (1996). Particle packing and concrete properties", materials science of concrete II (pp. 111–147). American Ceramic Society.
   Google Scholar
• Larrard, F., & Belloc, A. (1997). The influence of aggregate on the compressive strength of normal and high-strength concrete. ACI Materials Journal, 94(5), 417–425. https://doi.org/10.14359/326
   Web of Science ®Google Scholar
• Mechling, J. M., Lecomte, A., & Diliberto, C. (2009). Relation between cement composition and compressive strength of pure pastes. Cement and Concrete Composites, 31(4), 255–262. https://doi.org/10.1016/j.cemconcomp.2009.02.009
   Web of Science ®Google Scholar
• Mehta, P. K., & Monteiro, P. (2006). Concrete: Microstructure, properties, and materials (3rd ed.). McGraw Hill LLC.
   Google Scholar
• Montgomery, D. C., & Runger, G. C. (2003). Applied statistics and probability for engineers (3rd ed.). John Wiley and Sons Inc.
   Google Scholar
• Moutassem, F. (2010). [Packing density links concrete mixture, rheology, and compressive strength] [PhD dissertation]. McMaster University.
   Google Scholar
• Moutassem, F. (2016). Assessment of packing density models and optimizing concrete mixtures. International Journal of Civil, Mechanical and Energy Science, 2(4), 29–36.
   Google Scholar
• Moutassem, F. (2020a). Microstructure model for predicting the sorptivity of concrete mixtures. Civil Engineering and Architecture, 8(2), 77–83. https://doi.org/10.13189/cea.2020.080205
   Google Scholar
• Moutassem, F. (2020b). Ultra-lightweight EPS concrete: Mixing procedure and predictive models for compressive strength. Civil Engineering and Architecture, 8(5), 963–972. https://doi.org/10.13189/cea.2020.080523
   Google Scholar
• Moutassem, F., & Alamara, K. (2021). Design and production of sustainable lightweight concrete precast sandwich panels for non-load bearing partition wall systems. Cogent Engineering, 8(1), 1993565. https://doi.org/10.1080/23311916.2021.1993565
   Web of Science ®Google Scholar
• Moutassem, F., & Chidiac, S. E. (2016). Assessment of concrete compressive strength predictions methods. KSCE Journal of Civil Engineering, 20(1), 343–358. https://doi.org/10.1007/s12205-015-0722-4
   Web of Science ®Google Scholar
• Moutassem, F., & Miqdadi, I. (2020). Sustainability-model approach for chloride permeability based on concrete mixture. Structures Journal, Elsevier Publishers, 28, 983–990. https://doi.org/10.1016/j.istruc.2020.09.041
   Web of Science ®Google Scholar
• Moutassem, F., & Miqdadi, I. (2023). Mathematical model for predicting the ultrasonic pulse velocity of concrete. Cogent Engineering, 10(1), 2199513. https://doi.org/10.1080/23311916.2023.2199513
   Web of Science ®Google Scholar
• Nafees, A., Amin, M. N., Khan, K., Nazir, K., Ali, M., Javed, M. F., Aslam, F., Musarat, M. A., & Vatin, N. I. (2022). Modeling of mechanical properties of silica fume-based green concrete using machine learning techniques. Polymers, 14(1), 30. https://doi.org/10.3390/polym14010030
   Web of Science ®Google Scholar
• Pann, K. S., Yen, T., Tang, C. W., & Lin, T. D. (2003). New strength model based on water-cement ratio and capillary porosity. ACI Materials Journal, 100(4), 311–318. https://doi.org/10.14359/12669
   Web of Science ®Google Scholar
• Pareek, K., & Hong, Y. M. (2020). Prediction of permeability and compressive strength for pervious concrete. IOP Conference Series: Materials Science and Engineering, 812(1), 012013. https://doi.org/10.1088/1757-899X/812/1/012013
   Google Scholar
• Popovics, S. (1985). New formulas for the prediction of the effect of porosity on concrete strength. ACI Materials Journal, 82(2), 136–146. https://doi.org/10.14359/10321
   Google Scholar
• Popovics, S. (1998). History of a mathematical model for strength development of Portland cement concrete. ACI Materials Journal, 95(5), 593–600. https://doi.org/10.14359/401
   Web of Science ®Google Scholar
• Popovics, S., & Ujhelyi, J. (2008). Contribution to the concrete strength versus water-cement ratio relationship. Journal of Materials in Civil Engineering, 20(7), 459–463.) https://doi.org/10.1061/(ASCE)0899-1561(2008)20:7(459)
   Web of Science ®Google Scholar
• Powers, T. C., & Brownyard, T. L. (1960). Studies of the physical properties of hardened Portland cement paste. Proceedings of the American Concrete Institute, 18(2), 669–712.
   Google Scholar
• Quiroga, P. (2003). [The effect of the aggregate characteristics on the performance of Portland cement concrete] [Ph.D. dissertation]. The University of Texas at Austin.
   Google Scholar
• Rasmussen, R. O., Ruiz, J. M., Rozycki, D. K., & McCullough, B. F. (2002). Constructing high-performance concrete pavements with FHWA HIPERPAV systems analysis software. Transportation Research Record: Journal of the Transportation Research Board, 1813(1), 11–20. https://doi.org/10.3141/1813-02
   Google Scholar
• Schindler, A. K., & Folliard, K. J. (2015). Heat of hydration models for cementitious materials. ACI Materials Journal, 102(1), 24–33. https://doi.org/10.14359/14246
   Google Scholar
• Seifan, M., Mendoza, S., & Berenjian, A. (2020). Mechanical properties and durability performance of fly ash based mortar containing nano and micro-silica additives. Journal of Construction and Building Materials, 252, 119121. https://doi.org/10.1016/j.conbuildmat.2020.119121
   Web of Science ®Google Scholar
• Tango, C. E. S. (2000). Time-generalisation of Abrams’ model for high performance concrete and practical application examples. Proceedings of the International Symposium on High Performance Concrete, Hong Kong University of Science and Technology.
   Google Scholar
• Tasi, C. T., Li, S., & Hwang, C. L. (2006). The effect of aggregate gradation on engineering properties of high performance concrete. Journal of ASTM International, 3(3), 1–12. https://doi.org/10.1520/JAI13410
   Google Scholar
• Toufar, W., Born, M., & Klose, E. (1976). Contribution of optimization of components of different density in polydispersed particles systems. Freiberger Booklet A, 558, 29–24.
   Google Scholar
• Wong, H., & Kwan, A. (2005). Packing density: A key concept for mix design of high performance concrete. Proceedings of Materials Science and Technology in Engineering Conference (MaSTEC). Hong Kong.
   Google Scholar
• Zrar, Y. J., Abdulrahman, P. I., Sherwani, A. F. H., Younis, K. H., & Mohammed, A. S. (2024). Sustainable innovation in self-compacted concrete: Integrating by-products and waste rubber for green construction practices. Structures, 62, 106234. https://doi.org/10.1016/j.istruc.2024.106234
   Web of Science ®Google Scholar