The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins

References

• Sabatini C. Color stability behavior of methacrylate-based resin composites polymerized with light-emitting diodes and quartz-tungsten-halogen. Oper Dent. 2015;40:271–281.
   PubMed Web of Science ®Google Scholar
• Ardu S, Braut V, Gutemberg D, et al. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int. 2010;41:695–702.
   PubMed Web of Science ®Google Scholar
• Villalta P, Lu H, Okte Z, et al. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent. 2006;95:137–142.
   PubMed Web of Science ®Google Scholar
• Arocha MA, Mayoral JR, Lefever D, et al. Color stability of siloranes versus methacrylate-based composites after immersion in staining solutions. Clin Oral Investig. 2013;17:1481–1487.
   PubMed Web of Science ®Google Scholar
• Samra AP, Pereira SK, Delgado LC, et al. Color stability evaluation of aesthetic restorative materials. Braz Oral Res. 2008;22:205–210.
   PubMedGoogle Scholar
• Borges A, Caneppele T, Luz M, et al. Color stability of resin used for caries infiltration after exposure to different staining solutions. Oper Dent. 2014;39:433–440.
   PubMed Web of Science ®Google Scholar
• Joiner A. Tooth colour: a review of the literature. J Dent. 2004;32(Suppl 1):3–12.
   PubMed Web of Science ®Google Scholar
• Yap AU, Tan SH, Wee SS, et al. Chemical degradation of composite restoratives. J Oral Rehabil. 2001;28:1015–1021.
   PubMed Web of Science ®Google Scholar
• Hengtrakool C, Kukiattrakoon B, Kedjarune-Leggat U. Effect of naturally acidic agents on microhardness and surface micromorphology of restorative materials. Eur J Dent. 2011;5:89–100.
   PubMedGoogle Scholar
• McKenzie MA, Linden RW, Nicholson JW. The physical properties of conventional and resin-modified glass-ionomer dental cements stored in saliva, proprietary acidic beverages, saline and water. Biomaterials. 2003;24:4063–4069.
   PubMed Web of Science ®Google Scholar
• Peumans M, Van Meerbeek B, Lambrechts P, et al. The influence of direct composite additions for the correction of tooth form and/or position on periodontal health. A retrospective study. J Periodontol. 1998;69:422–427.
   PubMed Web of Science ®Google Scholar
• Yap AU, Wu SS, Chelvan S, et al. Effect of hygiene maintenance procedures on surface roughness of composite restoratives. Oper Dent. 2005;30:99–104.
   PubMed Web of Science ®Google Scholar
• Kalachandra S, Taylor DF, Mc Grath JE, et al. Structure- property relationships in dental composites based on polydimethacrylates. Polymer Prepr. 1997;38:94–95.
   Google Scholar
• Sideridou I, Tserki V, Papanastasiou G. Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins. Biomaterials. 2002;23:1819–1829.
   PubMed Web of Science ®Google Scholar
• Ilie N, Hickel R. Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites. Dent Mater. 2009;25:810–819.
   PubMed Web of Science ®Google Scholar
• Weinmann W, Thalacker C, Guggenberger R. Siloranes in dental composites. Dent Mater. 2005;21:68–74.
   PubMed Web of Science ®Google Scholar
• Eick JD, Smith RE, Pinzino CS, et al. Stability of silorane dental monomers in aqueous systems. J Dent. 2006;34:405–410.
   PubMed Web of Science ®Google Scholar
• Yanikoglu N, Duymus ZY, Yilmaz B. Effects of different solutions on the surface hardness of composite resin materials. Dent Mater J. 2009;28:344–351.
   PubMed Web of Science ®Google Scholar
• Torres CRG, Da Silva TM, Sales ALLS, et al. Influence of chemical degradation and toothbrushing on surface of composites. WJOUD. 2015;6:65–70.
   Google Scholar
• Ruyter IE, Oysaed H. Conversion in different depths of ultraviolet and visible light activated composite materials. Acta Odontol Scand. 1982;40:179–192.
   PubMed Web of Science ®Google Scholar
• Food and Drug Administration. FDA guidelines for chemistry and technology requirements of indirect additive petitions. Washington, 1976.
   Google Scholar
• Gohring TN, Zehnder M, Sener B, et al. In vitro microleakage of adhesive-sealed dentin with lactic acid and saliva exposure: a radio-isotope analysis. J Dent. 2004;32:235–240.
   PubMed Web of Science ®Google Scholar
• Goldstein GR, Lerner T. The effect of toothbrushing on a hybrid composite resin. J Prosthet Dent. 1991;66:498–500.
   PubMed Web of Science ®Google Scholar
• Turssi CP, Hara AT, de Magalhaes CS, et al. Influence of storage regime prior to abrasion on surface topography of restorative materials. J Biomed Mater Res Part B Appl Biomater. 2003;65:227–232.
   PubMed Web of Science ®Google Scholar
• Ertas E, Güler AU, Yücel AC, et al. Color stability of resin composites after immersion in different drinks. Dent Mater J. 2006;25:371–376.
   PubMed Web of Science ®Google Scholar
• Akova T, Ozkomur A, Uysal H. Effect of food-simulating liquids on the mechanical properties of provisional restorative materials. Dent Mater. 2006;22:1130–1134.
   PubMed Web of Science ®Google Scholar
• Domingos PA, Garcia PP, Oliveira AL, et al. Composite resin color stability: influence of light sources and immersion media. J Appl Oral Sci. 2011;19:204–211.
   PubMed Web of Science ®Google Scholar
• Omata Y, Uno S, Nakaoki Y, et al. Staining of hybrid composites with coffee, oolong tea, or red wine. Dent Mater J. 2006;25:125–131.
   PubMed Web of Science ®Google Scholar
• Soares-Geraldo D, Scaramucci T, Steagall-Jr W, et al. Interaction between staining and degradation of a composite resin in contact with colored foods. Braz Oral Res. 2011;25:369–375.
   PubMed Web of Science ®Google Scholar
• Yesilyurt C, Yoldas O, Altintas SH, et al. Effects of food-simulating liquids on the mechanical properties of a silorane-based dental composite. Dent Mater J. 2009;28:362–367.
   PubMed Web of Science ®Google Scholar
• Zhang Y, Xu J. Effect of immersion in various media on the sorption, solubility, elution of unreacted monomers, and flexural properties of two model dental composite compositions. J Mater Sci: Mater Med. 2008;19:2477–2483.
   PubMed Web of Science ®Google Scholar
• Fujita M, Kawakami S, Noda M, et al. Color change of newly developed esthetic restorative material immersed in food-simulating solutions. Dent Mater J. 2006;25:352–359.
   PubMed Web of Science ®Google Scholar
• Roselino LMR, Cruvinel DR, Chinelatti MA, et al. Effect of brushing and accelerated ageing on color stability and surface roughness of composites. J Dent. 2013;41S:e54–e61.
   Google Scholar
• Patel SB, Gordan VV, Barrett AA, et al. The effect of surface finishing and storage solutions on the color stability of resin-based composites. J Am Dent Assoc. 2004;135:587–594.
   PubMed Web of Science ®Google Scholar
• Tan BL, Yap AU, Ma HN, et al. Effect of beverages on color and translucency of new tooth-colored restoratives. Oper Dent. 2015;40:E56–E65.
   PubMed Web of Science ®Google Scholar
• Heintze SD, Forjanic M, Ohmiti K, et al. Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load. Dent Mater. 2010;26:306–319.
   PubMed Web of Science ®Google Scholar
• Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater. 2006;22:211–222.
   PubMed Web of Science ®Google Scholar
• Lee YK, Powers JM. Color changes of resin composites in the reflectance and transmittance modes. Dent Mater. 2007;23:259–264.
   PubMed Web of Science ®Google Scholar
• Schulze KA, Marshall SJ, Gansky SA, et al. Color stability and hardness in dental composites after accelerated aging. Dent Mater. 2003;19:612–619.
   PubMed Web of Science ®Google Scholar
• Yap AU, Low JS, Ong LF. Effect of food-simulating liquids on surface characteristics of composite and polyacid-modified composite restoratives. Oper Dent. 2000;25:170–176.
   PubMed Web of Science ®Google Scholar