References
- Bi ZM, Wang L. Optimization of machining processes from the perspective of energy consumption: a case study. J. Manuf. Sys. 2012;31:420–428.10.1016/j.jmsy.2012.07.002
- Kyoto protocol: United Nations framework convention on climate change. Kyoto: Kyoto Protocol; 1997.
- Dahmus JB, Gutowski TG. An environmental analysis of machining. Proceedings of IMECE2004, ASME International Mechanical Engineering Congress and RD&D Expo 2004; California; USA; 643–652.
- Mori M, Fujishima M, Inamasu Y, et al. A study on energy efficiency improvement for machine tools. CIRP Ann-Manuf. Techn. 2011;60:145–148.10.1016/j.cirp.2011.03.099
- Li W, Kara S. An empirical model for predicting energy consumption of manufacturing processes: a case of turning process. Proc. IMechE Part B: J. Eng. Manuf. 2011;225:1636–1646.10.1177/2041297511398541
- Li W, Zein A, Kara S, et al. An investigation into fixed energy consumption of machine tools. Proceedings of the 18th CIRP International Conference on Life Cycle Engineering; Braunschweig, Germany; 2011.
- Schlosser R, Klocke F, Lung D. Sustainability in manufacturing – energy consumption of cutting processes, advances in sustainable manufacturing. Proceedings of 8th Global Conference on Sustainable Manufacturing, Abu Dhabi, United Arab Emirates. Springer Berlin Heidelberg; 2011. p. 85–89.
- Cao H, Li H, Cheng H, et al. A carbon efficiency approach for life-cycle carbon emission characteristics of machine tools. J. Cleaner Production. 2012;37:19–28.10.1016/j.jclepro.2012.06.004
- He Y, Liu B, Zhang X, et al. A modeling method of task-oriented energy consumption for machining manufacturing system. J. Cleaner Production. 2012;23:167–174.10.1016/j.jclepro.2011.10.033
- Hu SH, Liu F, He Y, et al. An on-line approach for energy efficiency monitoring of machine tools. J. Cleaner Production. 2012;27:133–140.10.1016/j.jclepro.2012.01.013
- Lungu N, Borzan M. Effect of cutting speed and feed rate on tool geometry, temperature and cutting forces in machining AISI 1045 carbon steel using FEM simulation. Proceedings in Manufacturing Systems. 2012;7:245–252.
- Özel T, Zeren E. Finite Element Method Simulation of Machining of AISI 1045 Steel with a Round Edge Cutting Tool. Proceedings of 8th CIRP International Workshop on Modeling of Machining Operations, 533–541; Chemnitz, Germany; 2005.
- Kumar NS, Tamizharasan T. Optimization of cutting insert geometry using Deform 3D: numerical simulation and experimental verification. Int. J. Simul. Modell. 2012;11:65–76.
- Sandvik Coromant, CoroTurn ®. Inserts for Turning, [Cited 2014 Jan 16]; Available from: http://www.sandvik.coromant.com/en-us/products/pages/productdetails.aspx?c=CCMT%2012%2004%2004-MM%201105.
- Deform – 2D. Operational Manual, Deform. 2009.
- Kalpakjian S, Schmid SR. Manufacturing processes for engineering materials. 6th ed., Singapore: Pearson Education; 2010.
- Drake R, Yildirim MB, Twomey J, et al. Data collection framework on energy consumption in manufacturing. Proceedings from Institute of Industrial Engineers Research Conference; 2006, Orlando, Florida, USA.
- Pehnt M. Dynamic lifecycle assessment of renewable energy technologies. Renewable Energy. 2006;31:55–71.10.1016/j.renene.2005.03.002