53
Views
1
CrossRef citations to date
0
Altmetric
Articles

Liquid-phase surface alloying of AZ31 magnesium alloy with silicon and iron

, , &

References

  • Zeng X, Wang Y, Ding W, et al. Effect of strontium on the microstructure, mechanical properties, and fracture behavior of AZ31 magnesium alloy. Metall. Mater. Trans. A. 2006;37:1333–1341.10.1007/s11661-006-1085-8
  • Song G-L, Xu Z. Electrochim. The surface, microstructure and corrosion of magnesium alloy AZ31 sheet. Acta. 2010;55:4148–4161.10.1016/j.electacta.2010.02.068
  • Jun Y, Sun GP, Wang H-Y, et al. Laser (Nd:YAG) cladding of AZ91D magnesium alloys with Al+Si+Al2O3. J. Alloys Compd. 2006;407:201–207.10.1016/j.jallcom.2005.06.049
  • Yamaguchi T, Serikawa T, Henmi M, et al. Mg2Si Coating Technology on Magnesium Alloys to Improve Corrosion and Wear Resistance. Mater.Trans. 2006;47:1026–1030.10.2320/matertrans.47.1026
  • Taha MA, El-Mahallawy NA, Hammouda RM, et al. PVD coating of Mg–AZ31 by thin layer of Al and Al–Si. J. Coat. Technol. Res. 2010;7:793–800.10.1007/s11998-010-9252-7
  • Wu. L-P, Zhao J-J, Xie Y-P, et al. Progress of electroplating and electroless plating on magnesium alloy. Trans. Nonferrous Met. Soc. China, 2010;20:s630–s637.
  • Ge Y, Wanga W, Wanga X, et al. Study on laser surface remelting of plasma-sprayed Al–Si/1 wt% nano-Si3N4 coating on AZ31B magnesium alloy. Appl. Surf. Sci. 2013;273:122–127.10.1016/j.apsusc.2013.01.204
  • Salman SA, Ichino R, Okido M. Improvement of corrosion resistance of AZ31 Mg alloy by anodizing with co-precipitation of cerium oxide. Trans. Nonferrous Met. Soc. China. 2009;19:883–886.10.1016/S1003-6326(08)60370-2
  • Gray J, Luan B. Protective coatings on magnesium and its alloys—a critical review. J. Alloys Compd. 2002;336:88–113.10.1016/S0925-8388(01)01899-0
  • Zhang S, Jiang F, Ding W. Microstructure and mechanical performance of pulsed current gas tungsten arc surface engineered composite coatings on Mg alloy reinforced by SiCp. Mat. Sci. Eng. A. 2008;490:208–220.10.1016/j.msea.2008.01.033
  • Yang Y, Wu H. Improving the wear resistance of AZ91D magnesium alloys by laser cladding with Al–Si powders. Mater. Lett. 2009;63:19–21.10.1016/j.matlet.2008.08.026
  • Elahi MR, Sohi MH, Safaei A. Liquid phase surface alloying of AZ91D magnesium alloy with Al and Ni powders. Appl. Surf. Sci. 2012;258:5876–5880.10.1016/j.apsusc.2012.02.128
  • Hiraga H, Inoue T, Kamado S, et al. Improving the wear resistance of a magnesium alloy by laser melt injection. Mater. Trans., JIM. 2001;42:1322–1325.10.2320/matertrans.42.1322
  • Murayama K, Suzuki A, Kamado S, et al. Improvement of wear resistance of magnesium by laser-alloying with silicon. Mater. Trans. 2003;44:531–538.10.2320/matertrans.44.531
  • Jiang HY, Ding W, Zeng X, et al. Mechanical Behavior of Gas Tungsten Arc Surface Modified Composite Layer on Mg Alloy AZ31 with SiCp and Aluminum. Mater. Sci. Forum. 2007;546:458–490.
  • Handbook, ASM metals handbook. Alloy Phase Diagr. 1992;3:44–45.
  • Qian M, Li D, Jin C. Microstructure and corrosion characteristics of laser-alloyed magnesium alloy AZ91D with Al–Si powder. Sci. Technol. Adv. Mater. 2008;9:25–31.10.1088/1468-6996/9/2/025002
  • Raghavan V. Fe-Mg-Si (Iron-Magnesium-Silicon). J. Phase Equilib. 2002;23:175–176.10.1361/1054971023604189
  • Liu L, Dong C. Gas tungsten-arc filler welding of AZ31 magnesium alloy. Mater. Lett. 2006;60:2194–2197.10.1016/j.matlet.2005.12.120

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.