Effect of silicon carbide particle size on microstructure and properties of a coating layer on steel produced by TIG technique

References

• Bach R, Damascheck E Geissler et al. In: Bergmann HW, Kupfer R, editors. Proceedings of 3rd European conference on Laser Treatment of Materials (ECLAT’90). Coberg: Sprwechsaal Publishing Group; 1990; p. 265–282.
   Google Scholar
• Ayers JD, Schaefer RJ. In: Ready JF, editors. Proceeding of the conference on Laser Applications in Material Processes. Bellingham. SPIE, 1979; p. 57–64.
   Google Scholar
• Dahotre NB, Mukherjee K. Development of microstructure in laser surface alloying of steel with chromium. Mater Sci. 1990;25:445–454.10.1007/BF00714054
   Google Scholar
• Fasasi AY, Pons M, Tassin C, et al. Laser surface melting of mild ateel with submicronic titanium carbide powders. J Mater Sci. 1994;29:5121–5126.10.1007/BF01151106
   Web of Science ®Google Scholar
• Atamert S, Bhadeshia HKDH. Comparison of the microstrucutre and abrasive wear properties of stellite hardfacing alloys deposited by arc welding and laser cladding. Metall Trans A. 1989;20:1037–1054.10.1007/BF02650140
   Google Scholar
• Khan TI, Fowles D. The surface modification of a Ti-6Al-4V alloy using a metal arc heat source. Surf Eng. 1997;13:257–259.10.1179/sur.1997.13.3.257
   Google Scholar
• Mridha S, Ng BS. Addition of ceramic particles to TIG melted titanium surfaces. Surf Eng. 1999;15:210–215.10.1179/026708499101516533
   Web of Science ®Google Scholar
• Ouyang JH, Pei YT, Lei TC, et al. Tribological behaviour of laser-clad TICP composite coating. Wear. 1995;185:167–172.10.1016/0043-1648(95)06604-7
   Web of Science ®Google Scholar
• Mridha S, Md Idriss AN, Maleque MA, et al. Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc. Int J Mech Mater Eng. 2012;1:48–53.
   Google Scholar
• Mridha S, Md Idriss AN, Baker TN. 189 Incorporation of TiC particles on AISI 4340 low alloy steel surfaces via tungsten inert gas arc melting. Adv Mater Res. 2012;445:655–660.10.4028/www.scientific.net/AMR.445
   Google Scholar
• Mridha S, Md Idriss AN, Maleque MA, et al. Melting of multipass surface tracks in steel incorporating titanium carbide powders. Mater Sci Technol. 2015;31:1362–1369.10.1179/1743284714Y.0000000712
   Web of Science ®Google Scholar
• Baker TN, Xin H, Hu C. Design of surface in situ metal–ceramic composite formation via laser treatment. Mater Sci Technol. 1994;10:536–544.10.1179/mst.1994.10.6.536
   Web of Science ®Google Scholar
• Mridha S, Baker TN. Metal matrix composite layers formed by laser processing of commercial purity Ti-SiCp in nitrogen environment. Mater Sci Technol. 1996;12:595–602.10.1179/026708396790165984
   Web of Science ®Google Scholar
• Mridha S, Baker TN. Metal matrix composite layer formation with 3 mu m SiCp powder on IMI318 titanium alloy surfaces through laser treatment. J Mater Proc Technol. 1997;63:432–437.10.1016/S0924-0136(96)02660-X
   Web of Science ®Google Scholar
• Terry BS, Chinyamakobvu OS. Dispersion and reaction of TiC in liquid-iron alloys. J Mater Sci. 1993;28:6779–6784.10.1007/BF00356431
   Web of Science ®Google Scholar
• Dutta Majumdar J, Ramesh Chandra BR, Nath AK, et al. Studies on compositionally graded silicon carbide dispersed composite surface on mild steel developed by laser surface cladding. J Mater Proc Technol. 2008;203: 505–512.10.1016/j.jmatprotec.2007.10.056
   Web of Science ®Google Scholar
• Reddy GH, Arul S, Sellamuthu R. Improving surface hardness of mild steel plates by addition of silicon carbide using gas tungsten arc as heat source. Appl Mech Mater. 2014;592–594:879–882.10.4028/www.scientific.net/AMM.592-594
   Google Scholar
• Patel P, Mridha S, Baker TN. Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique. Mater Sci Technol. 2014;30:1506–1514.10.1179/1743284713Y.0000000481
   Web of Science ®Google Scholar
• Muñoz de Escalona P, Mridha S, Baker TN. Effect of shielding gas on the properties and microstructure of melted steel surface using a TIG torch. Adv Mater Proc Technol. 2015;1:435–443.
   Google Scholar
• Information on http://www.hallite.com/upload/surface.pdf.
   Google Scholar
• Information on http://net.grundfos.com/doc/webnet/mining/downloads/pump-handbook.pdf.
   Google Scholar
• Information on http://www.in-situ.co.uk/crankshaft-machining.
   Google Scholar
• Choi Y, Liu R. Performance of nano/micro cbn particle coated tools in superfinish hard machining. Int J Mach Tools Manuf. 2009;49:683–689.10.1016/j.ijmachtools.2009.03.005
   Web of Science ®Google Scholar
• Uhlmann E, Fuentes JA, Keunecke M. Machining of high performance workpiece materials with CBN coated cutting tools. Thin Solid Films. 2009;518:1451–1454.10.1016/j.tsf.2009.09.095
   Web of Science ®Google Scholar
• Information on http://www.welding-consultant.com/WeldCracks.pdf.
   Google Scholar