Flow behaviour of TiHy 600 alloy under hot deformation using gleeble 3800

References

• Neal DF. Development and evaluation of high temperature titanium alloy IMI 834. In: Lacombe P, Tricot R, Béranger G, editors. Proceedings of the 6th world conference on titanium; 1988 June 6–9; Cannes, France. p. 253–258.
   Google Scholar
• Banerjee S, Robi PS, Srinivasan A, Praveen Kumar LP. High temperature deformation behavior of Al–Cu–Mg alloys micro-alloyed with Sn. J Mater Sci Eng A. 2010;527:2498–2503.10.1016/j.msea.2010.01.052
   Web of Science ®Google Scholar
• Boyer RR. An overview on the use of titanium in the aerospace industry. J Mater Sci Eng A. 1996;213:103–114.10.1016/0921-5093(96)10233-1
   Web of Science ®Google Scholar
• Sakai T, Belyakov A, Kaibyshev R, Miura H, Jonas JJ. Dynamic and post dynamic recrystallization under hot cold and severe plastic deformation condition. Prog Mater Sci. 2014;60:130–207.10.1016/j.pmatsci.2013.09.002
   Web of Science ®Google Scholar
• Faccoli M, Roberti R. Study of hot deformation behavior of 2205 duplex stainless steel through hot tension tests. J Mater Sci. 2013;48:5196–5203.10.1007/s10853-013-7307-8
   Web of Science ®Google Scholar
• Guo S, Li D, Guo Q, Wu Z, Peng H, Hu J. Investigation on hot workability characteristics of Inconel 625 superalloy using processing map. J Mater Sci. 2012;47:5867–5878.10.1007/s10853-012-6488-x
   Web of Science ®Google Scholar
• Aghaie-Khafri M, Golarzi N. Dynamic and metadynamic recrystallization of Hastelloy X superalloy. J Mater Sci. 2008;43:3717–3724.10.1007/s10853-008-2604-3
   Web of Science ®Google Scholar
• Medeiros SC, Prasad YVRK, Frazier WG, Srinivasan R. Microstructural modeling of metadynamic recrystallization in hot working of IN718 alloy. J Mater Sci Eng A. 2000;293:198–207.10.1016/S0921-5093(00)01053-4
   Web of Science ®Google Scholar
• Lin YC, Chen MS. Study of microstructural evolution during static recrystallization in a low alloy steel. J Mater Sci. 2009;44:835–842. doi:10.1007/s10853-008-3120-1.
   Web of Science ®Google Scholar
• Marchattiwar A, Sarkar A, Chakravarty JK, Kashyap BP. Dynamic recrystallization during hot deformation of 304 stainless steel. J Mater Eng Perform. 2013;22:2168–2175.
   Web of Science ®Google Scholar
• Gronostajski Z. The constitutive equations for FEM analysis. Mater Proc Technol. 2000;106:40–44.10.1016/S0924-0136(00)00635-X
   Web of Science ®Google Scholar
• Lin YC, Chen XM. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater Des. 2011;32:1733–1759.10.1016/j.matdes.2010.11.048
   Web of Science ®Google Scholar
• Sheppard T, Duan X. Modelling of static recrystallization by the combination of empirical models with the finite element method. J Mater Sci. 2003;38:1747–1754. doi:10.1023/A:1023283911730.
   Web of Science ®Google Scholar
• Zhang JM, Gao ZY, Zhuang JY, Zhong ZY. Mathematical modeling of the hot-deformation behavior of superalloy IN718. Metall Mater Trans A. 1999;30:2703–2712.
   Web of Science ®Google Scholar
• Lin YC, Fang X, Wang YP. Prediction of metadynamic softening in a multi-pass hot deformed low alloy steel using artificial neural network. J Mater Sci. 2008;43:5508–5515. doi:10.1007/s10853-008-2832-6.
   Web of Science ®Google Scholar
• Zhao J, Ding H, Zhao W, Huang M, Wei D, Jiang Z. Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network. Comput Mater Sci. 2014;92:47–56.10.1016/j.commatsci.2014.05.040
   Web of Science ®Google Scholar
• Han F, Tang B, Kou H, Li J, Feng Y. Cellular automata modeling of static recrystallization based on the curvature driven subgrain growth mechanism. J Mater Sci. 2013;48:7142–7152.10.1007/s10853-013-7530-3
   Web of Science ®Google Scholar
• Han F, Tang B, Kou H, Cheng L, Li J, Feng Y. Static recrystallization simulations by coupling cellular automata and crystal plasticity finite element method using a physically based model for nucleation. J Mater Sci. 2014;49:3253–3267.10.1007/s10853-014-8031-8
   Web of Science ®Google Scholar
• Ryan ND, McQueen HJ. Dynamic softening mechanisms in 304 austenitic stainless steels. Can Metall Q. 1990;29:147–162.10.1179/cmq.1990.29.2.147
   Web of Science ®Google Scholar
• Poliak EI, Jonas JJ. A one parameter approach to determining the critical parameters for the initiation of dynamic recrystallization. Acta Metall Mater. 1996;44:127–136.
   Google Scholar
• Najafizadeh A, Jonas JJ. Predicting the critical stress for initiation of dynamic recrystallization. ISIJ Int. 2006;46:1679–1684.10.2355/isijinternational.46.1679
   Web of Science ®Google Scholar
• Quan G-Z, Wu, D-S, Luo G-C, et al. Dynamic recrystallization kinetics in α phase of as-cast Ti–6Al–2Zr–1Mo–1 V alloy during compression at different temperatures and strainrates. J Mater Sci Eng A. 2014;589:23–33.10.1016/j.msea.2013.09.069
   Web of Science ®Google Scholar
• Kumar BK, Saxena KK, Dey SR, et al. Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600). J Alloys Compd. 2017;691:906–913.
   Web of Science ®Google Scholar
• Zhao D. Temperature corrections in compression tests. J Mater Process Technol. 1993;36:467–471.10.1016/0924-0136(93)90058-E
   Web of Science ®Google Scholar
• Zhao D. Testing for deformation modeling. In: Mechanical testing and evaluation. Vol. 8. Materials Park, OH: ASM Handbook, ASM International; 2000. p. 798–810.
   Google Scholar
• Zhang H, Zhang H, Li L. Hot deformation behavior of Cu–Fe–P alloys during compression at elevated temperatures. J Mater Process Technol. 2009;209:2892–2896.10.1016/j.jmatprotec.2008.06.048
   Web of Science ®Google Scholar
• Ding Z, Jia S, Zhao P, Deng M, Song K. Hot deformation behavior of Cu–0.6Cr–0.03Zr alloy during compression at elevated temperatures. Journal of. J Mater Sci Eng A. 2013;570:87–91.10.1016/j.msea.2013.01.059
   Web of Science ®Google Scholar
• Balasundar I, Raghu T, Kashyap BP. Modeling the hot working behavior of near-α titanium alloy IMI834. Mater Int. 2013;23(6):598–607.
   Google Scholar
• Quan GZ. Characterization for dynamic recrystallization kinetics based on stress-strain curves? In: Wilson P, editor. Recent developments in the study of recrystallization. 1st ed. Croatia: Intech publishers; 2013. p. 64–88.
   Google Scholar
• Thossatheppitak B, Uthaisangsuk V, Mungsuntisuk P, Suranuntchai S, Manonukul A. Low behaviour of nickel aluminium bronze under hot deformation. J Mater Sci Eng A. 2014;604:183–190.10.1016/j.msea.2014.03.025
   Web of Science ®Google Scholar
• Zhang J, Di H, Wang X, et al. Constitutive analysis of the hot deformation behavior of Fe–23Mn–2Al–0.2C twinning induced plasticity steel in consideration of strain. Mater Des. 2012;44:354–364.
   Web of Science ®Google Scholar
• Hui Y, Zhenhong L, Zhiliang Z. Investigation on Zener-Hollomon parameter in the warm-hot deformation behavior of 20CrMnTi. J Zhejiang Univ Sci A. 2006;7(8):1453–1460.
   Google Scholar
• Jonas JJ, Christodoulou N. The onset of plastic instability in tensile samples containing deformation defects. Scr Metall. 1978;12:393–397.10.1016/0036-9748(78)90242-9
   Google Scholar
• Hart EW. Theory of tensile test. Acta Metall. 1967;15:351–355.10.1016/0001-6160(67)90211-8
   Google Scholar
• Vo P, Jahazi M, Yue S. FEM modelling of recrystallization behaviour for Near-Alpha Ti Alloy IMI834. Adv Mater Res. 2010;89–91(91):592–597.10.4028/www.scientific.net/AMR.89-91
   Google Scholar
• Wanjara P, Jahazi M, Monajati H, Yue S, Immarigeon JP. Hot working behavior of near- α alloy IMI834. Mater Sci and Eng A. 2005;396:50–60.10.1016/j.msea.2004.12.005
   Web of Science ®Google Scholar
• Jonas JJ, Sellars CM, Tegart WJ. Strength and structure under hot working conditions. Metall Rev. 1969;14–1:1–24.
   Google Scholar
• Roucoules C, Hodgson PD, Yue S, Jonas JJ. Softening and microstructural change following the dynamic recrystallization of austenite. Metall Mater TransA. 1994;25A:389–400.10.1007/BF02647984
   Web of Science ®Google Scholar
• Dyment F. In: Kimura H, Izumi O, editors. Proceedings of the Fourth international conference on Titanium; 1980 May 19–22; Kyoto, Japan. p. 519–528.
   Google Scholar
• Bryant WA. Correlation of data on the hot deformation of Ti-6Al-4 V. J Mater Sci. 1975;10:1793–1797.10.1007/BF00554942
   Web of Science ®Google Scholar
• Braga HC, Barbosa R, Breme J. Hot strength of Ti and Ti6A14 V deformed in axial compression. Scripta Metall. Mater. 1993;28:979–983.10.1016/0956-716X(93)90066-2
   Web of Science ®Google Scholar
• Lianggang G, Xiaoguang F, Gaofeng Y, He Y. Microstructure control techniques in primary hot working of titanium alloy bars. Chin J Aeron. 2016;29(1):30–40.
   Web of Science ®Google Scholar
• Sheppard T, Norley J. Deformation characteristics of Ti-6Al-4 V. Mater Sci Technol. 1988;4:903–908.10.1179/mst.1988.4.10.903
   Web of Science ®Google Scholar
• Ding R, Guo ZX, Wilson A. Microstructural evolution of a Ti–6Al–4 V alloy during thermomechanical processing. Mater Sci Eng A. 2002;327:233–245.10.1016/S0921-5093(01)01531-3
   Web of Science ®Google Scholar
• Bate PS, Blackwell PL, Brooks JW. Proceedings of the VI World Conference on Titanium; 1997 Aug 11–25; France; 1998. p. 287–292.
   Google Scholar
• Zhou M. Constitutive modeling of the viscoplastic deformation in high temperature forging of titanium alloy IMI834. Mater Sci Eng A. 1998;245:29–38.10.1016/S0921-5093(97)00707-7
   Web of Science ®Google Scholar
• Zhaoxin D, Shulong X, Jingshun L, et al. Hot deformation behavior of Ti-3.5Al-5Mo-6 V-3Cr-2Sn-0.5Fe alloy in α + β field. Metals. 2015;5:216–227.
   Web of Science ®Google Scholar
• Miaoquan L, Hongsi P, Yingying L, Jiao L. High temperature deformation behavior of near alpha Ti–5.6Al–4.8Sn–2.0Zr alloy. J Mater Process Technol. 2007;183:71–76.
   Web of Science ®Google Scholar
• Sellars CM, Tegart WJ. Hot workability. Int Metall Rev. 1972;17:1–24.
   Google Scholar
• Mirzadeh H, Najafizadeh A. Extrapolation of flow curves at hot working conditions. J Mater Sci Eng A. 2010;527:1856–1860.10.1016/j.msea.2009.11.013
   Web of Science ®Google Scholar
• Mirzaee M, Keshmiri H, Ebrahimi GR, Momeni A. Dynamic recrystallization and precipitation in low carbon low alloy steel 26NiCrMoV 14-5. J Mater Sci Eng A. 2012;551:25–31.10.1016/j.msea.2012.04.063
   Web of Science ®Google Scholar
• Wei HL, Liu GQ, Xiao X, Zhang MH. Dynamic recrystallization behavior of a medium carbon vanadium microalloyed steel. J Mater Sci Eng A. 2013;573:215–221.10.1016/j.msea.2013.03.009
   Web of Science ®Google Scholar
• Yuanxin L, Yuqing H, Wang Y, Yan X. Dynamic recrystallization behavior of TA15 titanium alloy under isothermal compression during hot deformation. Adv Mater Sci and Eng. 2014; Article ID 413143:1–11. 10.1155/2014/571357
   Web of Science ®Google Scholar