Metal matrix composite: a methodological review

References

• Rohatgi P. Cast aluminum-matrix composites for automotive applications. JOM. 1991;43(4):10–15.
   Web of Science ®Google Scholar
• Kelly A. Composite materials after seventy years. J Mater Sci. 2006;41(3):905–912.
   Web of Science ®Google Scholar
• Rawal SP. Metal-matrix composites for space applications. JOM. 2001;53(4):14–17.
   Web of Science ®Google Scholar
• Shelley JS, LeClaire R, Nichols J. Metal-matrix composites for liquid rocket engines. JOM. 2001;53(4):18–21.
   Web of Science ®Google Scholar
• Ajayan PM, Ebbesen TW, Ichihashi T, et al. Opening carbon nanotubes with oxygen and implications for filling. Nature. 1993;362(6420):522.
   Web of Science ®Google Scholar
• Thostenson ET, Ren Z, Chou T-W. Advances in the science and technology of carbon nanotubes and their composites: a review. Compos Sci Technol. 2001;61(13):1899–1912.
   Web of Science ®Google Scholar
• Bacon R. Growth, structure, and properties of graphite whiskers. J Appl Phys. 1960;31(2):283–290.
   Web of Science ®Google Scholar
• Zhang Z, Chen DL. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites. Mater Sci Eng A. 2008;483:148–152.
   Web of Science ®Google Scholar
• Zhang Z, Chen DL. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength. Scr Mater. 2006;54(7):1321–1326.
   Web of Science ®Google Scholar
• Sanaty-Zadeh A. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of hall–petch effect. Mater Sci Eng A. 2012;531:112–118.
   Web of Science ®Google Scholar
• Luo PENG, McDonald DT, Xu W, et al. A modified hall–petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing. Scr Mater. 2012;66(10):785–788.
   Web of Science ®Google Scholar
• Kehler H, Bode R, Haddenhorst H. Particle-reinforced light-metals. Metall. 1995;49(3):191–195.
   Google Scholar
• Kaczmar JW, Kainer KU. Effect of alumina fibre content on properties of PM 6061 aluminium alloy based composite materials. Powder Metall. 1992;35(2):133–136.
   Web of Science ®Google Scholar
• Han BQ, Chan KC. Superplastic deformation mechanisms of particulate reinforced aluminum matrix composites. Mater Sci Eng A. 1996;212(2):256–264.
   Web of Science ®Google Scholar
• Kaczmar J. Effect of production engineering parameters on structure and properties of CU-W composite powders. Powder metallurgy. 1989; 32(2):171–175.
   Google Scholar
• Kathari NC. Sintering behaviour of copper containing titania. Mod Develop Powder Metall. 1984;16:361–376.
   Google Scholar
• Warrier KGK, Rohatgi PK. Copper-titania electrical contacts. Powder Metall. 1984;29:65–69.
   Web of Science ®Google Scholar
• Kaczmar JW, Pietrzak K, Włosiński W. The production and application of metal matrix composite materials. J Mater Process Technol. 2000;106(1–3):58–67.
   Web of Science ®Google Scholar
• González-Carrasco JL, Guttmann V, Fattori H. Void formation during oxidation of the ODS alloy MA 6000. Metall Mater Trans A. 1995;26(4):915–924.
   Web of Science ®Google Scholar
• Saji S, Neishi Y, Araki H, et al. Amorphization promoted by mechanical alloying of aluminum-rich Al-Ti-Fe mixed powders. Metall Mater Trans A. 1995;26(5):1305–1307.
   Web of Science ®Google Scholar
• Pilling J, Livesey DW, Hawkyard JB, et al. Solid state bonding in superplastic Ti-6Al-4V. Metal Sci. 1984;18(3):117–122.
   Web of Science ®Google Scholar
• Enjo T, ikeuchi K, furukawa K. Behavior of oxide film in diffusion bonding of aluminum (materials, metallurgy & weldability). Trans JWRI. 1985;14(1):115–122.
   Google Scholar
• Partridge PG, Ward-Close CM. Diffusion bonding of advanced materials. Met Mater. 1989;5(6):334–339.
   Google Scholar
• Harvey J, Partridge PG, Snooke CL. Diffusion bonding and testing of Al-alloy lap shear test pieces. J Mater Sci. 1985;20(3):1009–1014.
   Web of Science ®Google Scholar
• Karunakaran M, Pugazh Vadivu M. Magnetic and micro-mechanical behavior of Cu-Ni-PW-TiO2 hybrid composite electroplating on Al alloy substrate. J Magn Magn Mater. 2019;475:359–367.
   Web of Science ®Google Scholar
• Zhou J, Zhao G, Li J, et al. Electroplating of non-fluorinated superhydrophobic Ni/WC/WS2 composite coatings with high abrasive resistance. Appl Surf Sci. 2019;487:1329–1340.
   Web of Science ®Google Scholar
• Saini Abhineet B, Pabla S, Dhami SS. Preparation and characterization of electrodeposited Ni–TiC, Ni–TiN, and Ni–TiC–TiN composite coatings on tungsten carbide cutting tool. Proc Ins Mech Eng J. 2019;1350650119841214.
   Google Scholar
• Vaezi MR, Sadrnezhaad SK, Nikzad L. Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics. Colloids Surf A. 2008;315:176–182.
   Web of Science ®Google Scholar
• Cui X, Wei W, Liu H, et al. Electrochemical study of codeposition of Al particle—nanocrystalline Ni/Cu composite coatings. Electrochim Acta. 2008;54(2):415–420.
   Web of Science ®Google Scholar
• Surender M, Basu B, Balasubramaniam R. Wear characterization of electrodeposited Ni–WC composite coatings. Tribol Int. 2004;37(9):743–749.
   Web of Science ®Google Scholar
• Abdel Aal A. Hard and corrosion resistant nanocomposites coating for Al alloy. Mater Sci Eng A. 2008;474:181–187.
   Web of Science ®Google Scholar
• Devaneyan SP, Senthilvelan T. Electro co-deposition and characterization of SiC in nickel metal matrix composite coatings on aluminium 7075. Procedia Eng. 2014;97:1496–1505.
   Google Scholar
• Ozben T, Kilickap E, Cakır O. Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC. J Mater Process Technol. 2008;198(1–3):220–225.
   Web of Science ®Google Scholar
• Feng YC, Geng L, Zheng PQ, et al. Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting. Mater Des. 2008;29(10):2023–2026.
   Web of Science ®Google Scholar
• Mohanty RM, Balasubramanian K, Seshadri SK. Boron carbide-reinforced alumnium 1100 matrix composites: fabrication and properties. Mater Sci Eng A. 2008;498(1–2):42–52.
   Web of Science ®Google Scholar
• Hashim J, Looney L, Hashmi MSJ. Metal matrix composites: production by the stir casting method. J Mater Process Technol. 1999;92:1–7.
   Web of Science ®Google Scholar
• Kerti I, Toptan F. Microstructural variations in cast B4C-reinforced aluminium matrix composites (AMCs). Mater Lett. 2008;62(8–9):1215–1218.
   Web of Science ®Google Scholar
• Kumar A, Kumar S and Garg R, A review paper on stir casting of reinforced aluminum metal matrix composite, International Journal of advance research in science and engineering, Vol. 4 (1), 2015, pp 62-74.
   Google Scholar
• Miracle DB, Donaldson SL, Henry SD, et al. ASM handbook. Vol. 21. Materials Park, OH: ASM international; 2001
   Google Scholar
• Campbell FC. Structural composite materials. ASM international; 2010.
   Google Scholar
• Asthana R, Kumar A, Dahotre NB. Materials processing and manufacturing science. Elsevier; USA. 2006.
   Google Scholar
• Shi G, Wang Z, Liang J, et al. NiCoCrAl/YSZ laminate composites fabricated by EB-PVD. Mater Sci Eng A. 2011;529:113–118.
   Web of Science ®Google Scholar
• Li Y, Zhao J, Zeng G, et al. Ni/Ni3Al microlaminate composite produced by EB-PVD and the mechanical properties. Mater Lett. 2004;58(10):1629–1633.
   Web of Science ®Google Scholar
• Guo H, Xu H, Bi X, et al. Preparation of Al2O3–YSZ composite coating by EB-PVD. Mater Sci Eng A. 2002;325(1–2):389–393.
   Web of Science ®Google Scholar
• Contreras A, Salazar M, León CA, et al. Kinetic study of the infiltration of aluminum alloys into TiC preforms. Mater Manuf Processes. 2000;15(2):163–182.
   Web of Science ®Google Scholar
• Contreras A, Lopez VH, Bedolla E. Mg/TiC composites manufactured by pressureless melt infiltration. Scr Mater. 2004;51(3):249–253.
   Web of Science ®Google Scholar
• León CA, Arroyo Y, Bedolla E, et al. Properties of AlN-based magnesium-matrix composites produced by pressureless infiltration. Mater Sci Forum Trans Technol Publ. 2006;509:105–110.
   Web of Science ®Google Scholar
• Bedolla E, Lemus-Ruiz J, Contreras A. Synthesis and characterization of Mg-AZ91/AlN composites. Mater Des. 2012;38:91–98.
   Web of Science ®Google Scholar
• Venkatesh TA, Dunand DC. Reactive infiltration processing and secondary compressive creep of NiAl and NiAl-W composites. Metall Mater Trans A. 2000;31(3):781–792.
   Web of Science ®Google Scholar
• Hsu H-C, Chou J-Y, Tuan W-H. Preparation of AlN/Cu composites through a reactive infiltration process. J Asian Ceram Soc. 2016;4(2):201–204.
   Web of Science ®Google Scholar
• Elahinejad S, Sharifi H, Nasresfahani MR. Vibration effects on the fabrication and the interface of Al–SiC composite produced by the pressureless infiltration method. Surf Rev Lett. 2018;25(04):1850089.
   Web of Science ®Google Scholar
• Fogagnolo JB, Robert MH, Torralba JM. The effects of mechanical alloying on the extrusion process of AA 6061 alloy reinforced with Si3N4. J Braz Soc Mech Sci Eng. 2003;25(2):201–206.
   Google Scholar
• Fogagnolo JB, Velasco F, Robert MH, et al. Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders. Mater Sci Eng A. 2003;342(1–2):131–143.
   Web of Science ®Google Scholar
• Srivatsan TS, Lewandowski J. Metal matrix composites: types, reinforcement, processing, properties and applications. Mater Eng-N Y. 2006;32:275.
   Google Scholar
• Shabani A, Toroghinejad MR, Shafyei A. Fabrication of Al/Ni/Cu composite by accumulative roll bonding and electroplating processes and investigation of its microstructure and mechanical properties. Mater Sci Eng A. 2012;558:386–393.
   Web of Science ®Google Scholar
• Hosseini M, Pardis N, Danesh Manesh H, et al. Structural characteristics of Cu/Ti bimetal composite produced by accumulative roll-bonding (ARB). Mater Des. 2017;113:128–136.
   Web of Science ®Google Scholar
• Testani C, Ferraro F, Deodati P, et al. Comparison between roll diffusion bonding and hot isostatic pressing production processes of Ti6Al4V-SiCf metal matrix composites. Mater Sci Forum. 2011;678:145–154, Trans Tech Publications
   Google Scholar
• Zheng X, Huang M, Ding C. Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings. Biomaterials. 2000;21(8):841–849.
   PubMed Web of Science ®Google Scholar
• Yip CS, Khor KA, Loh NL, et al. Thermal spraying of Ti· 6Al· 4V/hydroxyapatite composites coatings: powder processing and post-spray treatment. J Mater Process Technol. 1997;65(1–3):73–79.
   Web of Science ®Google Scholar
• Chung DDL. Carbon fiber composites Butterworth. Elsevier, USA; 1994.
   Google Scholar
• Zhang G, Hu L, Hu W, et al. Mechanical properties of NiAl-Mo composites produced by specially controlled directional solidification. MRS Online Proc Lib Arch. 2012;1516:255–260.
   Google Scholar
• Hu L, Hu W, Gottstein G, et al. Investigation into microstructure and mechanical properties of NiAl-Mo composites produced by directional solidification. Mater Sci Eng A. 2012;539:211–222.
   Web of Science ®Google Scholar
• Gunjishima I, Akashi T, Goto T. Characterization of directionally solidified B4C-TiB2 composites prepared by a floating zone method. Mater Trans. 2002;43(4):712–720.
   Web of Science ®Google Scholar
• Zhang H, Springer H, Aparicio-Fernández R, et al. Improving the mechanical properties of Fe–TiB2 high modulus steels through controlled solidification processes. Acta Materialia. 2016;118:187–195.
   Web of Science ®Google Scholar
• Kumar S, Singh R, Singh TP, et al. Multimaterial printing and characterization for mechanical and surface properties of functionally graded prototype. Proc Inst Mech Eng Part C. 2019;233(19–20):6741–6753.
   Web of Science ®Google Scholar
• Indian Patent Application No.: 2847/DEL/20132847.Elsevier, USA.
   Google Scholar
• Kumar S, Singh R, Singh TP, et al. Investigations for magnetic properties of PLA-PVC-Fe3O4-wood dust blend for self-assembly applications. J Thermoplast Composite Mater. 2019;0892705719857778.
   Web of Science ®Google Scholar
• Kumar S, Singh R, Singh TP, et al. On investigation of rheological, mechanical and morphological characteristics of waste polymer-based feedstock filament for 3D printing applications. J Thermoplast Composite Mater. 2019;0892705719856063.
   Web of Science ®Google Scholar
• Singh R, Kumar R, Kumar S. Polymer waste as fused deposition modeling feed stock filament for industrial applications. In: Hashmi S, editor. Reference module in material science and engineering. Elsevier, USA; 2017. p. 1–12.
   Google Scholar
• Kumar S, Singh R, Singh TP, et al. PLA composite matrix as functional prototypes for four dimensional applications. In: Hashmi S, editor. Reference module in material science and engineering. Elsevier; 2019. p. 1–10.
   Google Scholar
• Kumar S, Singh R, Singh TP, et al. Investigations of polylactic acid reinforced composite feedstock filaments for multimaterial three-dimensional printing applications. Proc Inst Mech Eng Part C. 2019;233(17):5953–5965.
   Web of Science ®Google Scholar
• Kumar S, Singh R, Singh TP, et al. On mechanical characterization of 3-D printed PLA-PVC-wood dust-Fe3O4 composite. J Thermoplast Composite Mater. 2019;0892705719879195.
   Google Scholar
• Singh D, Babbar A, Jain V, et al. Synthesis, characterization, and bioactivity investigation of biomimetic biodegradable PLA scaffold fabricated by fused filament fabrication process. J Braz Soc Mech Sci Eng. 2019;41(3):121.
   Web of Science ®Google Scholar
• Kumar R, Singh R, Ahuja IPS. Investigations of mechanical, thermal and morphological properties of FDM fabricated parts for friction welding applications. Measurement. 2018;120:11–20.
   Web of Science ®Google Scholar
• Singh R, Kumar R, Farina I, et al. Multi-material additive manufacturing of sustainable innovative materials and structures. Polymers. 2019;11(1):62.
   PubMed Web of Science ®Google Scholar
• Singh R, Kumar R. Development of low-cost graphene-polymer blended in-house filament for fused deposition modeling. In: Hashmi S, editor. Reference module in materials science and materials engineering. Oxford: Elsevier; 2017. p. 1–10.
   Google Scholar
• Singh R, Dureja JS. Development of metal matrix composite-based dental implants by stir casting in silicon molding-based investment shells. In: Hashmi S, editor. Reference module in materials science and materials engineering. Oxford: Elsevier; 2017; pp. 1-9, ISBN: 978-0-12-803581-8.
   Google Scholar