References
- Bhattacharjee D, Muthusamy K, Ramanujam S. Effect of load and composition on friction and dry sliding behavior of tungsten carbide particle-reinforced iron composites. Tribo Trans. 2014;57:292–299. .
- Parswajinam C, VijayRamnath B, Elanchezhian C, et al. Investigation on mechanical properties of nano ferrous composite. Procedia Eng. 2014;97:513–521.
- Jha P, Gupta P, Kumar D, et al. Effect of sintering mechanism on the properties of ZrO2 reinforced fe metal matrix nanocomposite. J Compos. 2015;2015:1–8.
- Gupta P, Kumar D, Prakash O. Sintering and hardness behaviour of Fe-Al2O3 metal matrix nano composites prepared by powder metallurgy. J Compos. 2014;2014:1–10.
- Chauhan S, Verma V, Prakash U, et al. Analysis of powder metallurgy process parameters for mechanical properties of sintered Fe-Cr-Mo alloy steel. Mater Manuf Proc. 2017;32:537–541. .
- Khuntia SK, Pani BB, Nayak S. Fabrication of composites from different carbon content ferrous powders adopting thermomechanical processes. Mater Manuf Proc. 2019;34:882–888. .
- Nuruzzaman DM, Kamaruzaman FF, Nasrah MA. Effect of sintering temperature on the properties of aluminium-aluminium oxide composite materials. Int J Eng Mater Manuf. 2016;1:59–64.
- Gupta P, Kumar D, Quraishi MA, et al. Effect of sintering parameters on the corrosion characteristics of iron-alumina metal matrix nanocomposites. J Mater Environ Sci. 2015;6:155–167.
- Srinivasa K, Prajwal AS, Parashivamurty KI, et al. Review on Fe-TiC composites for industries. Int Res J Eng Technol. 2016;3:394–405.
- Pani BB, Khuntia SK. Processing of structural components from high carbon content rapidly solidified alloyed ferrous powders. Int J Mater Sci. 2017;12:571–579.
- Degnan CC, Kellie JLF, Wood JV. Department of Materials Engineering and Materials design. Rotherham, (UK): University of Nottingham, London and Scandinavian Metallurgical Co. Ltd.; 1996.
- Chambers BV, Kattamis TZ, Cornie JA, et al. Solidification behavior of particulate TiC-ferrous matrix composites. In: Beech J, Jones H, editors. Proceedings of Conference on Solidification Processing, Institute of Metals, London 1987, p. 435–441.
- Khuntia SK, Pani BB. Powder metallurgy processing of low carbon content ferrous powders for making structural components. Int J Mater Sci. 2018;13:7–14.
- Hong L, Burdett CF, Youming W. Solidification characteristics of atomized white cast iron powders. Scr Metall. 1993;29:249–254.
- Bandyopadhyay TK, Das K. Synthesis and characterization of TiC-reinforced iron based composites Part ii on mechanical characterization. J Mater Sci. 2004;39:6503–6508.