Effect of substrate on the properties of cold sprayed coating of WC-10Ni

References

• Li WY, Zhang C, Liao H, et al. Characterizations of cold-sprayed nickel–alumina composite coating with relatively large nickel-coated alumina powder. Surf Coat Technol. 2008;202:4855–4860.
   Google Scholar
• Kumar S, Singh R, Hashmi MSJ. Metal matrix composite: a methodological review. Adv Mater Process Technol. 2020;6(1):13–24.
   Google Scholar
• Singh L, Singh B, Saxena KK. Manufacturing techniques for metal matrix composites (MMC): an overview. Adv Mater Process Technol. 2020;6(2):441–457.
   Google Scholar
• Assadi H, Kreye H, Gärtner F, et al. Cold spraying – a materials perspective. Acta Materialia. 2016;116:382–407.
   Google Scholar
• Dykhuizen RC, Smith MF. Gas dynamic principles of cold spray. J Therm Spray Technol. 1998;7(2):205–212.
   Google Scholar
• Faizan-Ur-Rab M, Zahiri SH, King PC, et al. Utilization of Titanium Particle Impact Location to Validate a 3D Multicomponent Model for Cold Spray Additive Manufacturing. J Therm Spray Technol. 2017; 26(8):1874–1887.
   Google Scholar
• V.K. Champagne, Introduction, in: V.K. Champagne (Ed.) The Cold Spray Materials Deposition Process, Woodhead Publishing, Cornwall, 2007, pp. 1–7
   Google Scholar
• Cinca N, List A, Gärtner F, et al. Influence of spraying parameters on cold gas spraying of iron aluminide intermetallics. Surf Coat Technol. 2014: 268:99-107.
   Google Scholar
• Cavaliere P, Silvello A. Processing parameters affecting cold spay coatings performances. The International Journal of Advanced Manufacturing Technology. 2014;71(1–4):263–277.
   Google Scholar
• Sova A, Doubenskaia M, Grigoriev S, et al. Parameters of the gas-powder supersonic jet in cold spraying using a mask. J Therm Spray Technol. 2013;22(4):551–556.
   Google Scholar
• Seo D, Ogawa K, Sakaguchi K, et al. Parameter study influencing thermal conductivity of annealed pure copper coatings deposited by selective cold spray processes. Surf Coat Technol. 2012;206(8–9):2316–2324.
   Google Scholar
• Goyal T, Walia RS, Sidhu TS. Effect of parameters on coating density for cold spray process. Mater Manuf Processes. 2012;27(2):193–200.
   Google Scholar
• Chavan NM, Ramakrishna M, Phani PS, et al. The influence of process parameters and heat treatment on the properties of cold sprayed silver coatings. Surf Coat Technol. 2011;205(20):4798–4807.
   Google Scholar
• Couto M, Dosta S, Guilemany JM. Comparison of the mechanical and electrochemical properties of WC-17 and 12Co coatings onto Al7075-T6 obtained by high velocity oxy-fuel and cold gas spraying. Surf Coat Technol. 2014; 268:180–189
   Google Scholar
• Couto M, Dosta S, Fernández J, et al. Comparison of the mechanical and electrochemical properties of WC-25Co coatings obtained by high velocity oxy-fuel and cold gas spraying. J Therm Spray Technol. 2014;23(8):1251–1258.
   Google Scholar
• Dosta S, Couto M, Guilemany JM. Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates. Acta Materialia. 2013;61(2):643–652.
   Google Scholar
• Couto M, Dosta S, Torrell M, et al. Cold spray deposition of WC–17 and 12Co cermets onto aluminum. Surf Coat Technol. 2013;235:54–61.
   Google Scholar
• Vidaller MV, List A, Gaertner F, et al. Single impact bonding of cold sprayed Ti-6Al-4V powders on different substrates. J Therm Spray Technol. 2015;24(4):644–658.
   Google Scholar
• Manap A, Nooririnah O, Misran H, et al. Experimental and SPH study of cold spray impact between similar and dissimilar metals. Surf Eng. 2014;30(5):335–341.
   Google Scholar
• Yin S, Suo X, Su J, et al. Effects of substrate hardness and spray angle on the deposition behavior of cold-sprayed Ti particles. J Therm Spray Technol. 2014;23(1–2):76–83.
   Google Scholar
• Ernst K-R, Braeutigam J, Gaertner F, et al. Effect of substrate temperature on cold-gas-sprayed coatings on ceramic substrates. J Therm Spray Technol. 2013;22(2–3):422–432.
   Google Scholar
• Arabgol Z, Villa Vidaller M, Assadi H, et al. Influence of thermal properties and temperature of substrate on the quality of cold-sprayed deposits. Acta Materialia. 2017;127:287–301.
   Google Scholar
• Rokni MR, Nutt SR, Widener CA, et al. Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray. J Therm Spray Technol. 2017;26(6):1308–1355.
   Google Scholar
• of Particle Morphology on Cold Spray Deposition of Chromium Carbide-Nickel Chromium Cermet Powders. Therm Spray Technol. 2017;26(6): 1356-1380.
   Google Scholar
• Nastic A, Vijay M, Tieu A, et al. Experimental and Numerical Study of the Influence of Substrate Surface Preparation on Adhesion Mechanisms of Aluminum Cold Spray Coatings on 300M Steel Substrates. J Therm Spray Technol. 2017;26(7):1461–83
   Google Scholar
• D, Legoux J-G, Vo P, et al. Powder Development and Qualification for High-Performance Cold Spray Copper Coatings on Steel Substrates. J Therm Spray Technol. 2019;28(3):444-59.
   Google Scholar
• Lima MM, Godoy C, Modenesi PJ, et al. Coating fracture toughness determined by Vickers indentation: an important parameter in cavitation erosion resistance of WC–Co thermally sprayed coatings. Surf Coat Technol. 2004;177-178:489–496.
   Google Scholar
• Assadi H, Schmidt T, Richter H, et al. On parameter selection in cold spraying. J Therm Spray Technol. 2011;20(6):1161–1176.
   Google Scholar
• Zahiri SH, Antonio CI, Jahedi M. Elimination of porosity in directly fabricated titanium via cold gas dynamic spraying. J Mater Process Technol. 2009;209(2):922–929.
   Google Scholar
• Belbaki A, Mebdoua-Lahmar Y. Applied mechanics, behavior of materials, and engineering systems. In: Boukharouba T, Pluvinage G, Azouaoui K, editors. Selected contributions to the 5th Algerian Congress of Mechanics, CAM2015, El-Oued, Algeria October 25 – 29. Cham: Springer International Publishing; 2017. p. 465–473.
   Google Scholar
• Schmidt T, Gärtner F, Assadi H, et al. Development of a generalized parameter window for cold spray deposition. Acta Materialia. 2006;54(3):729–742.
   Google Scholar
• Dosta S, Bolelli G, Candeli A, et al. Plastic deformation phenomena during cold spray impact of WC-Co particles onto metal substrates. Acta Materialia. 2017;124:173–181.
   Google Scholar
• Ang ASM, Berndt CC. A review of testing methods for thermal spray coatings. Int Mater Rev. 2014;59(4):179–223.
   Google Scholar
• Marshall DB, Noma T, Evans AG. A simple method for determining elastic-modulus-to-hardness ratios using knoop indentation measurements. J Am Ceram Soc. 1982;65(10):175–176.
   Google Scholar
• Leigh S-H, Lin C-K, Berndt CC. Elastic response of thermal spray deposits under indentation tests. J Am Ceram Soc. 1997;80(8):2093–2099.
   Google Scholar
• Lima MM, Godoy C, Avelar-Batista JC, et al. Toughness evaluation of HVOF WC–Co coatings using non-linear regression analysis. Mater Sci Eng A. 2003;357(1–2):337–345.
   Google Scholar