Studying the effect of adding Titanium Dioxide (TiO₂) nanoparticles on the compressive strength of chemical and heat-activated acrylic denture base resins

References

• Hashem M, Alsaleem SO, Assery MK, et al. A comparative study of the mechanical properties of the light-cure and conventional denture base resins. Oral Health Dent Manag. 2014;13(2):311–315.
   Google Scholar
• Ghahremani L, Shirkavand S, Akbari F, et al. Tensile strength and impact strength of color modified acrylic resin reinforced with titanium dioxide nanoparticles. J Clin Exp Dent. 2017;9(5):e661.
   Google Scholar
• Zidan S, Silikas N, Alhotan A, et al. Investigating the mechanical properties of ZrO2-impregnated PMMA nanocomposite for denture-based applications. Materials. 2019;12(8):1344.
   Google Scholar
• Adhikari R, Michler GH. Polymer nanocomposites characterization by microscopy. J Macromol Sci Part C: Polymer Rev. 2009;49(3):141–180.
   Google Scholar
• Gad MM, Fouda SM, Al-Harbi FA, et al. PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition. Int J Nanomedicine. 2017;12:3801.
   Google Scholar
• Murthy HM, Shaik S, Sachdeva H, et al. Effect of reinforcement using stainless steel mesh, glass fibers, and polyethylene on the impact strength of heat cure denture base resin-An in vitro study. J Int Oral Health JIOH. 2015;7(6):71.
   Google Scholar
• Kumar SR, Vijayalakshmi R. Nanotechnology in dentistry. Indian J Dent Res. 2006;17(2):62–65.
   Google Scholar
• de Souza Leão R, de Moraes SLD, de Luna Gomes JM, et al. Influence of addition of zirconia on PMMA: A systematic review. Mater Sci Eng C. 2020;106:110292.
   Google Scholar
• Kim KI, Kim DA, Patel KD, et al. Carbon nanotube incorporation in PMMA to prevent microbial adhesion. Sci Rep. 2019;9(1):1–11.
   Google Scholar
• Dagdiya M, Pakhan A, Bhoyar A, et al. Comparative evaluation of the flexural strength of heat polymerized acrylic resin with the addition of 8% and 13% aluminum oxide powder: an in-vitro study. J Dent Mater Techniq. 2019;8(2):65–72.
   Google Scholar
• Hilal IH, Mohammed MR, Shakir WA. Effect of silver (Ag) nanoparticles on structural and mechanical properties of (PMMA) blend and its application for denture base. Int J Med Res Health Sci. 2019;8(1):154–159.
   Google Scholar
• Vikram S, Chander NG. Effect of zinc oxide nanoparticles on the flexural strength of polymethylmethacrylate denture base resin. Eur Oral Res. 2020;54(1):31.
   Google Scholar
• Bangera MK, Kotian R, Ravishankar N. Effect of titanium dioxide nanoparticle reinforcement on flexural strength of denture base resin: A systematic review and meta-analysis. Japan Dent Sci Rev. 2020;56(1):68–76.
   Google Scholar
• Alamgir M, Mallick A, Nayak G, et al. Development of PMMA/TiO2 nanocomposites as excellent dental materials. J Mech Sci Technol. 2019;33(10):4755–4760.
   Google Scholar
• Aziz HK. TiO2-nanofillers effects on some properties of highly-impact resin using different processing techniques. Open Dent J. 2018;12:202.
   Google Scholar
• Alrahlah A, Fouad H, Hashem M, et al. Titanium oxide (TiO2)/polymethylmethacrylate (PMMA) denture base nanocomposites: mechanical, viscoelastic and antibacterial behavior. Materials. 2018;11(7):1096.
   Google Scholar
• Acosta-Torres LS, López-Marín LM, Nunez-Anita RE, et al. Biocompatible metal-oxide nanoparticles: nanotechnology improvement of conventional prosthetic acrylic resins. J Nanomater. 2011;2011.
   Google Scholar
• Ahmed MA, El-Shennawy M, Althomali YM, et al. Effect of titanium dioxide nano particles incorporation on mechanical and physical properties on two different types of acrylic resin denture base. World J Nano Sci Eng. 2016;6(3):111–119.
   Google Scholar
• Al Sheheri SZ, Al-Amshany ZM, Al Sulami QA, et al. The preparation of carbon nanofillers and their role on the performance of variable polymer nanocomposites. Des Monomers Polym. 2019;22(1):8–53.
   Google Scholar
• Gad MM, Abualsaud R. Behavior of PMMA denture base materials containing titanium dioxide nanoparticles: a literature review. Int J Biomater. 11;2019.
   Google Scholar
• Moslehifard E, Anaraki MR, Shirkavand S. Effect of adding TiO2 nanoparticles on the SEM morphology and mechanical properties of conventional heat-cured acrylic resin. J Dent Res Dent Clin Dent Prospects. 2019;13(3):234.
   Google Scholar
• Subhapriya S, Gomathipriya P. Green synthesis of titanium dioxide (TiO2) nanoparticles by Trigonella foenum-graecum extract and its antimicrobial properties. Microb Pathog. 2018;116:215–220.
   Google Scholar
• Swapna MV, Haridas KR. An easier method of preparation of mesoporous anatase TiO2 nanoparticles via ultrasonic irradiation. J Exp Nanosci. 2016;11(7):540–549.
   Google Scholar
• Davari A, Kazemi AD, Mousavinasab M, et al. Evaluation the compressive and diametric tensile strength of nano and hybrid composites. Dent Res J (Isfahan). 2013;9:6.
   Google Scholar
• Kundie F, Azhari CH, Muchtar A, et al. Effects of filler size on the mechanical properties of polymer-filled dental composites: A review of recent developments. J Phys Sci. 2018;29(1):141–165.
   Google Scholar
• ISO/TS 80004-2:2015. Nanotechnologies — vocabulary — part 2: nano-objects ISO/TS 80004-1:2010. Geneva, Switzerland: International Organization for Standardization; 2010. [cited August 17, 2020] https://www.iso.org/standard/54440.html
   Google Scholar
• Karci M, Demir N, Yazman S. Evaluation of flexural strength of different denture base materials reinforced with different nanoparticles. J Prosthodontics. 2019;28(5):572–579.
   Google Scholar
• Harini P, Mohamed K, Padmanabhan T. Effect of Titanium dioxide nanoparticles on the flexural strength of polymethylmethacrylate: an in vitro study. Indian J Dent Res. 2014;25(4):459.
   Google Scholar
• Ghaffari T, Hamedirad F, Ezzati B. In vitro comparison of compressive and tensile strengths ofacrylic resins reinforced by silver nanoparticles at 2% and0. 2% concentrations. J Dent Res Dent Clin Dent Prospects. 2014;8(4):204.
   Google Scholar
• Zidan S, Silikas N, Haider J, et al. Evaluation of equivalent flexural strength for complete removable dentures made of zirconia-impregnated PMMA nanocomposites. Materials. 2020;13(11):2580.
   Google Scholar
• Heidari B, Firouz F, Izadi A, et al. Flexural strength of cold and heat cure acrylic resins reinforced with different materials. J Dent (Tehran). 2015;12(5):316.
   Google Scholar