References
- Oliveira GA, Contreras EMC, Bandarra Filho EP. Experimental study on the heat transfer of MWCNT/water nanofluid flowing in a car radiator. Appl Therm Eng. 2017;111:1450–1456.
- Maiga SEB, Palm SJ, Nguyen CT, et al. Heat transfer enhancement by using nanofluids in forced convection flows. Int J Heat Fluid Flow. 2005;26(4):530–546.
- Chandrasekar M, Suresh S, Bose AC. Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under laminar flow with wire coil inserts. Exp Therm Fluid Sci. 2010;34(2):122–130.
- Park KJ, Jung D. Enhancement of nucleate boiling heat transfer using carbon nanotubes. Int J Heat Mass Transfer. 2007;50(21–22):4499–4502.
- Sundar LS, Singh MK. Convective heat transfer and friction factor correlations of nanofluid in a tube and with inserts: a review. Renew Sust Energ Rev. 2013;20:23–35.
- Suresh S, Venkitaraj KP, Selvakumar P, et al. Effect of Al2O3–Cu/water hybrid nanofluid in heat transfer. Exp Therm Fluid Sci. 2012;38:54–60.
- Chougule SS, Sahu SK. Heat transfer and friction characteristics of Al2O3/water and CNT/water nanofluids in transition flow using helical screw tape inserts–a comparative study. Chem Eng Process Process Intensif. 2015;88:78–88.
- Hameed MS, Suresh S, Singh RK. Comparative study of heat transfer and friction characteristics of water-based Alumina–copper and Alumina–CNT hybrid nanofluids in laminar flow through pipes. J Therm Anal Calorim. 2019;136(1):243–253.
- Chougule SS, Nirgude VV, Gharge PD, et al. Heat transfer enhancements of low volume concentration CNT/water nanofluid and wire coil inserts in a circular tube. Energy Procedia. 2016;90:552–558.
- Chougule SS, Nirgude VV, Sahu SK. Experimental study on laminar forced convection of Al2O3/water and multiwall carbon nanotubes/water nanofluid of varied particle concentration with helical twisted tape inserts in pipe flow. Heat Transf Eng. 2018;39(9):806–818.
- Chougule SS, Sahu SK. Comparative study on heat transfer enhancement of low volume concentration of Al2O3–water and carbon nano-tube–water nanofluids in transition regime using helical screw tape inserts. Exp Heat Transfer. 2016;29(1):17–36.
- Ashtiani D, Akhavan-Behabadi MA, Pakdaman MF. An experimental investigation on heat transfer characteristics of multi-walled CNT-heat transfer oil nanofluid flow inside flattened tubes under uniform wall temperature condition. Int J Heat Mass Transf. 2012;39(9):1404–1409.
- Fakoor-Pakdaman M, Akhavan-Behabadi MA, Razi P. An empirical study on the pressure drop characteristics of nanofluid flow inside helically coiled tubes. Int J Ther Sci. 2013;65:206–213.
- Diao YH, Li CZ, Zhang J, et al. Experimental investigation of MWCNT–water nanofluids flow and convective heat transfer characteristics in multiport minichannels with smooth/micro-fin surface. Powder Technol. 2017;305:206–216.
- Devarajan M, Krishnamurthy NP, Balasubramanian M, et al. Thermophysical properties of CNT and CNT/Al2O3 hybrid nanofluid. Micro Nano Lett. 2018;13(5):617–621.
- Gnielinski V. New equations for heat and mass transfer in the turbulent flow in pipes and channels. NASA STI/recon tech rep A. 1975;75:8–16.
- Gnielinski V. Forced convection in ducts. Heat exch des handb. 1983;2:1–2.
- Wongcharee K, Eiamsa-Ard S. Enhancement of heat transfer using CuO/water nanofluid and twisted tape with alternate axis. Int J Heat Mass Transf. 2011;38(6):742–748.