On correlation of rheological, thermal, mechanical and morphological properties of chemical assisted mechanically blended ABS-Graphene composite as tertiary recycling for 3D printing applications

References

• Sun T, Wang G, Feng L, et al. Reversible switching between superhydrophilicity and superhydrophobicity. Angew Chem Int Ed. 2004;43(3):357–360.
   Google Scholar
• Jishnu A, Jayan JS, Saritha A. et al. Superhydrophobic graphene-based materials with self-cleaning and anticorrosion performance: an appraisal of neoteric advancement and future perspectives, colloids and surfaces A. Physicochem Eng Asp. 2020; 125395.
   Google Scholar
• Ryan L, Li H, Norret M. et al. robust hydrophobic coatings using polymer blends for the surface protection of marble, colloids and surfaces A. Physicochem Eng Asp. 2020; 124796.
   Google Scholar
• Li F, Li X, He R, et al. Preparation and evaluation of poly(D, L-lactic acid)/poly(L-lactide-co-ε-caprolactone) blends for tunable sirolimus release, colloids and surfaces A. Physicochem Eng Asp. 2020;590:124518.
   Google Scholar
• Kumar R, Kumar AP, Singh R, et al. On nano polypyrrole and carbon nano tube reinforced PVDF for 3D printing applications: rheological, thermal, electrical, mechanical, morphological characterization. J Compos Mater. 2020;0021998320938433.
   Google Scholar
• Singh N, Hui D, Singh R, et al. Recycling of plastic solid waste: a state of art review and future applications. Compos B Eng. 2017;115:409–422.
   Google Scholar
• Sharma R, Singh R, Batish A, et al. On effect of chemical-assisted mechanical blending of barium titanate and graphene in PVDF for 3D printing applications. J Thermoplast Compos Mater. 2020;0892705720945377.DOI: https://doi.org/10.1177/0892705720945377.
   Google Scholar
• Kumar S, Singh R, Singh TP, et al. Flexural, pull-out, and fractured surface characterization for multi-material 3D printed functionally graded prototype. J Compos Mater. 2020;54(16):2087–2099.
   Google Scholar
• Borges SV, Dias ML, Pita VJ, et al. Process ability, morphology and thermal behavior of poly (lactic acid)/synthetic mica nanocomposites obtained by melt blending. J Compos Mater. 2014;48(12):1429–1440.
   Google Scholar
• Kannan M, Bhagawan SS, Thomas JK, et al. Mechanical properties and morphology of nano-clay filled different TPU/PP blend nanocomposites: structure-property relations. J Compos Mater. 2009;43(18):1915–1925.
   Google Scholar
• Li HJ, Li ZQ, Cao CW, et al. Li. Microstructural characterization of non-equilibrated 4D carbon/carbon composites in ultrahigh temperature environment. J Compos Mater. 2013;47(5):529–537.
   Google Scholar
• Dlamini DS, Mishra SB, Mishra AK, et al. Comparative studies of the morphological and thermal properties of clay/polymer nanocomposites synthesized via melt blending and modified solution blending methods. J Compos Mater. 2011;45(21):2211–2216.
   Google Scholar
• Shifeng H, Dongyu X, Jun C, et al. Smart properties of carbon fiber reinforced cement-based composites. J Compos Mater. 2007;41(1):125–131.
   Google Scholar
• Reinaldo JS, Pereira LM, Dos Santossilva E, et al. Effect of the chemical structure on the linear viscoelastic behavior of acrylic and styrenic polymer blends. Polym Test. 2018;67:257–265.
   Google Scholar
• Ahn D, Lee J, Kang C, et al. Physico-chemical properties of new composite polymer for heat resistance with thin-film form through the blending of m-aramid and polyurethane (PU). Polymer. 2018;138:17–23.
   Google Scholar
• Torrisi V, Licciardello A, Marletta G, et al. Chemical imaging of self-assembling structures in langmuir–blodgett films of polymer blends. Mater Sci Eng B. 2010;169(1–3):49–54.
   Google Scholar
• Tsuneizumi Y, Kuwahara M, Okamoto K, et al. Chemical recycling of poly (lactic acid)-based polymer blends using environmentally benign catalysts. Polym Degrad Stab. 2010;95(8):1387–1393.
   Google Scholar
• Rutkowski P. Influence of zinc chloride addition on the chemical structure of bio-oil obtained during co-pyrolysis of wood/synthetic polymer blends. Waste Manage. 2009;29(12):2983–2993.
   Google Scholar
• Lei YG, Cheung ZL, Ng KM, et al. Surface chemical and morphological properties of a blend containing semi-crystalline and amorphous polymers studied with ToF-SIMS. XPS AFM Polymer. 2003;44(14):3883–3890.
   Google Scholar
• Kumar V, Singh R, Ahuja IPS, et al. Effect of extrusion parameters on primary recycled ABS: mechanical, rheological, morphological and thermal properties. Mater Res Express. 2020; 7(1):015208.
   Google Scholar
• Kumar V, Singh R, Ahuja IPS, et al. Secondary recycled acrylonitrile–butadiene–styrene and graphene composite for 3D/4D applications: rheological, thermal, magnetometric, and mechanical analyses. J Thermoplast Compos Mater. 2020 May 18;0892705720925114.DOI: https://doi.org/10.1177/0892705720925114
   Google Scholar
• Kumar R, Singh R, Ahuja IPS, et al. Mechanical, thermal and micrographic investigations of friction stir welded: 3D printed melt flow compatible dissimilar thermoplastics. J Manuf Process. 2019;38:387–395.
   Google Scholar
• Ranjan N, Singh R, Ahuja IPS, et al. Investigations for mechanical properties of PLA-HAp-CS based functional prototypes, materials today. Proceedings. 2019;18:2329–2334.
   Google Scholar
• Singh R, Kumar R, Singh M, et al. On compressive and morphological features of 3D printed almond skin powder reinforced PLA matrix. Mater Res Express. 2020;7(2):025311.
   Google Scholar
• Singh R, Kumar S, Bedi P, et al. On SiC/Al2O3 reinforced HDPE 3D printed rapid tooling, materials today. Proceedings. 2020 Mar 14.pp 1483-1487
   Google Scholar
• Chawla K., Singh R., Singh J. (2020) Segregation and Recycling of Plastic Solid Waste: A Review. In: Prakash C., Singh S., Krolczyk G., Pabla B. (eds) Advances in Materials Science and Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-4059-2_17.
   Google Scholar
• Mankotia K, Singh I, Singh R, et al. On effect of almond skin powder waste reinforcement in PA6: rheological, thermal and wear properties, materials today. Proceedings. 2020 Apr 25.1546-1551.
   Google Scholar
• Singh R, Sandhu GS, et al. Investigations of graphene reinforced acrylonitrile-butadiene-styrene matrix prototypes produced via functional deposition modeling (FDM), reference module in materials science and materials engineering. 2020; DOI:10.1016/B978-0-12-803581-8.11915-0.
   Google Scholar
• Boparai KS, Singh R, Hashmi MS, et al. Reinforced non-conventional material composites: a comprehensive review. Adv Materials Process Technol. 2020 Jun 26;1.
   Google Scholar
• Dave HK, Prajapati AR, Rajpurohit SR, et al. Investigation on tensile strength and failure modes of FDM printed part using in-house fabricated PLA filament. Adv Materials Process Technol. 2020 Oct 15;1–22
   Google Scholar