Characterisation of Aluminium Ni–40Fe–10Ti fabricated by friction stir processing

References

• Sharma V, Prakash U, Manoj Kumar BV. Surface composites by friction stir processing: a review. J Mater Process Tech. 2015;224:117–134.
   Web of Science ®Google Scholar
• Singh L, Singh B, Saxena KK. Manufacturing techniques for metal matrix composites (MMC): an overview. Adv Mater Process Tech. 2020;6(2):441–457.
   Web of Science ®Google Scholar
• Choo S-H, Lee S, Kwon S-J. Surface hardening of a gray cast iron used for a diesel engine cylinder block using high-energy electron beam irradiation. Metall Mater Trans A. 1999;30(5):1211–1221.
   Web of Science ®Google Scholar
• Mahamood RM, Akinlabi ET. Scanning speed influence on the microstructure and micro hardness properties of titanium alloy produced by laser metal deposition process. Mater Today Proc. 2017;4(4):5206–5214.
   Google Scholar
• Xu J, Zou B, Tao S, et al. Fabrication and properties of Al2O3–TiB2–TiC/Al metal matrix composite coatings by atmospheric plasma spraying of SHS powders. J Alloys Compd. 2016;672:251–259.
   Web of Science ®Google Scholar
• Hashim J, Looney L, Hashmi MSJ. Metal matrix composites: production by the stir casting method. J Mater Process Technol. 1999;92-93:1–7.
   Web of Science ®Google Scholar
• Akinlabi ET, Mahamood RM. Solid-State Welding: friction and Friction Stir Welding Processes. Cham, Switzerland: Springer. 2020.
   Google Scholar
• Mahmoud ERI, Takahashi M, Shibayanagi T, et al. Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing. Wear. 2010;268(9–10):1111–1121.
   Web of Science ®Google Scholar
• Soleymani S, Abdollah-zadeh A, Alidokht SA. Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing. Wear. 2012;278-279:41–47.
   Web of Science ®Google Scholar
• Singh B, Singhal P, Saxena KK. Effect of transverse speed on mechanical and microstructural properties of friction stir welded aluminium AA2024-T351. Adv Mater Process Tech. 2020;6(3):519–529.
   Web of Science ®Google Scholar
• Qu J, Xu HB, Feng ZL, et al. Improving the tribological characteristics of aluminum 6061 alloy by surface compositing with sub-micro-size ceramic particles via friction stir processing. Wear. 2011;271(9–10):1940–1945.
   Web of Science ®Google Scholar
• Akinlabi ET, Mahamood RM, Akinlabi SA, et al. Processing Parameters Influence on Wear Resistance Behaviour of Friction Stir Processed Al-TiC Composites. Adv Mater Sci Eng. 2014;2014:1–12.
   Web of Science ®Google Scholar
• Bhushan RK, Sharma D. Optimization of Friction Stir Welding Parameters to Maximize Hardness of AA6082/Si3N4 and AA6082/SiC Composites Joints. Silicon. 2021. DOI:10.1007/s12633-020-00894-4
   Web of Science ®Google Scholar
• Nami H, Adgi H, Sharifitabar M, et al. Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite, Mater. Des. 2011;32(2):976–983.
   Google Scholar
• Dolatkhah A, Golbabaei P, Besharati MK, et al. Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing. Mater Des. 2012;278-279:458–464.
   Google Scholar
• Devaraju A, Kumar A, Kumaraswamy A, et al. Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing. Mater Des. 2013;51:331–341.
   Web of Science ®Google Scholar
• Zohoor M, Besharati Givi MK, Salami P. Effect of processing parameters on fabrication of AleMg/Cu composites via friction stir processing. Mater Des. 2012;39:358–365.
   Web of Science ®Google Scholar
• Sudhakar I, Madhu V, Madhusudhan Reddy G, et al. Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing. Def Technol. 2015;11(1):10–17.
   Web of Science ®Google Scholar
• Sibisi TH, Shongwe MB, Johnson OT, et al. Effect of processing parameters on corrosion behaviour of Al reinforced with Ni-40Fe-10Ti alloy fabricated by FSP. The International Journal of Advanced Manufacturing Technology. 2020;110(9–10):2703–2711.
   Web of Science ®Google Scholar
• Raaft M, Mahmoud TS, Zakaria HM, et al. Microstructural, Mechanical and wear behaviour of A390/graphite and A390/Al2O3 surface composites fabricated using FSP. J Mater Sci Eng A. 2011; 528:5741-5746.
   PubMedGoogle Scholar
• Liu HJ, Fujii H, Maeda M, et al. Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy. J Mater Process Tech. 2003;142:692–696.
   Web of Science ®Google Scholar
• Alidokht SA, Abdollah A, Soleymani S, et al. Microstructure and tribological performance of aluminium alloy-based hybrid composite produced by friction stir processing. Mater Des. 2011;32:2727–2733.
   Web of Science ®Google Scholar
• Khayyamin D, Mostafapour A, Keshmiri R. The effect of process parameters on microstructural characteristics of AZ91/SiO2com-posite fabricated by FSP. Mater Sci Eng A. 2013;559:217–221.
   Web of Science ®Google Scholar
• Elangovan K, Balasubramanian V. Effect of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA6061 aluminium alloy. In J Mater Manuf Processes. 2008; 23: 251-260.
   Google Scholar
• Chen YC, Liu H, Feng J. Friction stir welding characteristics of different heat-treated-state 2219 aluminium alloy plates. Mater Sci Eng A. 2006;420:21–25.
   Web of Science ®Google Scholar
• Lin DC, Wang TS, Srivatsan TS. A mechanism for the formation of equiaxed grains in welds of aluminum-lithium alloy 2090. Mater Sci Eng A. 2003;335:304–309.
   Google Scholar