https://orcid.org/0000-0002-2838-6238
References
- Durga Rajesh KV, Buddi T, Mishra H. Finite element simulation of Ti-6Al-4V billet on open die forging process under different temperatures using Deform-3D. Adv Mater Process Technol. 2021. DOI:10.1080/2374068X.2021.1878708
- Durga RKV, Buddi T, Kanth PR, et al. Microstructural and corrosion resistance study on plasma arc welded joints of AISI 304 and AISI 316. Adv Mater Process Technol. 2020;6:189–205.
- Lee SIK, Yoon J, Lee J. Mg scroll forging with AZ80 under warm forming condition. Int J Precis Eng Manuf. 2014;15(7):1473–1477.
- Kong TF, Chan LC, Lee TC. Numerical and experimental investigation of preform design in non-axisymmetric warm forming. Int J Adv Manuf Technol. 2008;37(9–10):908–919.
- Fai KT, Chow CL, Chui LT. Prediction of a billet shape for axisymmetric warm forming using vibrational analysis. Key Eng Mater. 2004;274-276:733–738.
- Lee S, Kim B, Lee H-J, et al. Warm forging of an aluminium alloy for the differential case in an automobile transmission. J Automob Eng. 2015; 230:1–9.
- Yongyi L, shengdun Z, Fan S, et al. Study on the material characterisitc and process parameters of the open-die warm extrusion process of spline shaft with 42CRMo steel. J Alloys Compd. 2013;571:12–20.
- Syed Ansari S, Chakravarthi KVA, SVS NM, et al. Hot workability and Microstructure control through the analysis of stress-strain curves during Hot Deformation of M350 Grade Maraging Steel. Mater Perform Charact. 2019;8(5):969–984.
- Chakravarthi KVA, Koundinya NTBN, SVS NM, et al. Microstructure, properties and hot workability of M300 Grade Maraging Steel. Defence Technol. 2018;14(1):51–58.
- Chakravarthi KVA, Koundinya NTBN, Narayana MSVS, et al. Microstructural Evolution and Constitutive Relationship of M350 Grade Maraging Steel During Hot Deformation. J Mater Eng Perform. 2017;26(3):1174–1185.
- Korade D, Ramana KV, Jagtap K. Influence of cryogenic treatment on the tribological behaviour of AISI H21 tool steel. Mater Res. 2019;22:1–12.
- Korade D, Ramana KV, Jagtap K. Wear and Fatigue Behaviour of Deep Cryogenically Treated H21 Tool Steel. Trans Indian Inst Met. 2020;73(4):843–851.
- Rajyalakshmi K, Nageswara Rao B. Modified Taguchi approach to trace the optimum GMAW process parameters on weld dilution for ST-37 steel plates. J Test Eval. 2019;47(4):3209–3223.
- Satyanarayana G, Narayana KL, Nageswara Rao B. Optimal laser welding process parameters and expected weld bead profile for P92 steel. SN Appl Sci. 2019;1(10):1291.
- Durga Rajesh KV, Avs RP, Shaik AM, et al. SEM with EDAX analysis on plasma arc welded butt joints of AISI 304 and AISI 316 steels. Mater Today. 2021;44:1350–1355.