References
- Ikubanni PP, Oki M, Adeleke AA, et al. Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell. Results Eng. 2020;8:1–9.
- Adediran AA, Alaneme KK, Oladele IO, et al. International symposium on nanostructured, nanoengineered and advanced materials. Mater Today Proceed. 2021;38:928–933.
- Bodunrin MO, Alaneme KK, Chown LH. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. J Mater Res Technol. 2015;4(4):434–445.
- Adediran AA, Alaneme KK, Oladele IO, et al. Processing and structural characterization of Si-based carbothermal derivatives of bamboo leaf. Procedia Manuf. 2019;35:389–394.
- Adediran AA, Alaneme KK, Oladele IO, et al. Structural characterization of silica based carbothermal derivatives of rice husk. Procedia Manuf. 2019;35:436–441.
- Edoziuno FO, Adediran AA, Odoni BU, et al. Physico-chemical and morphological evaluation of palm kernel shell particulate reinforced aluminium matrix composites. Mater Today Proceed. 2021;38(2):652–657.
- Adediran AA, Alaneme KK, Oladele IO. Synthesis of Si-based refractory compounds from coconut shell by carbothermal method. Int J Eng Res Afr. 2019;41:20–25.
- Hyie KM, Budin S, Elias H. Fabrication of biomorphic silicon carbide from agriculture waste powders. Int J Mech Eng Rob Res. 2017;6(6):524–528. https://pdfs.semanticscholar.org/24b9/4b74cb5c9
- Kumar P, Sharma S, Kandpal BC. Synthesis and mechanical characterization of biomass fly ash strengthened aluminium matrix composites. Mater Today Proc. 2020;26(2):266–272.
- Adediran AA, Alaneme KK, Oladele IO, et al. Cogent Eng. 2018;5(1):1–12.
- Falk G, Shinhe GP, Teixeira LB, et al. Synthesis of silica nanoparticles from sugarcane bagasse ash and nano-silicon via magnesiothermic reactions. Ceram Int. 2019;45((17) Part A):21618–21624.
- Singh L, Singh B, Saxena KK. Manufacturing techniques for metal matrix composites (MMC): an overview. Adv Mater Process Technol. 2020;6(2):441–457.
- Arulraj M, Davim JP, Hashmi MSJ. Prediction of tensile strength in squeeze casted hybrid aluminium matrix composites using conventional statistical approach. Adv Mater Process Technol. 2021;1–13. DOI:10.1080/2374068X.2021.1896865
- Alaneme KK, Akintunde IB, Olubambi PA, et al. Fabrication characteristics and mechanical behaviour of rice husk ash – alumina reinforced Al-Mg-Si alloy matrix hybrid composites. J Mater Res Technol. 2013;2(1):60–67.
- David GF, Justo OR, Perez VH, et al. Thermochemical conversion of sugarcane bagasse by fast pyrolysis: high yield of levoglucosan production. J Anal Appl Pyrolysis. 2018;133:246–253.
- Arenas-Piedrahita JC, Montes-Gracia P, Mendoza-Rangel JM, et al. Mechanical and durability properties of mortars prepared with untreated sugarcane bagasse ash and untreated fly ash. Constr Build Mater. 2016;105:69–81.
- Aminulla E, Rohaeti I. Reduction of high purity silicon from bamboo leaf as basic material in development of sensors manufacture in satellite technology. Procedia Environ Sci. 2015;24:308–316.
- Farirai F, Mupa M, Daramola MO. An improved method for the production of high purity silica from sugarcane bagasse ash obtained from a bioethanol plant boiler. Part Sci Technol. 2021;39(2):252–259.
- Sharma DK, Mahant D, Upadhyay G. Manufacturing of metal matrix composites: a state of review. Mater Today Proc. 2020;26(2):506–519.