Experimental investigation and optimisation of α–β brass at elevated temperatures using Taguchi approach

References

• Darmawan AS, Febriantoko BW, Anggono AD, et al. Effect of thickness reduction on cold rolling process to microstructure and brass hardness. 2018;01001.
   Google Scholar
• Fukuda Y, Noda MF, Ito T, et al. Effect of reduction in thickness and rolling conditions on mechanical properties and microstructure of rolled Mg-8Al-1Zn-1Ca alloy. Adv Mater Sci Eng. 2017;2017:Article ID 4065434.
   Web of Science ®Google Scholar
• Jha SK, Kumar DBB, Paluchamy R. Experimental analysis of microstructure and mechanical properties of copper and brass based alloys. Int J Automot Mech Eng. 2015;11:2317–2331.
   Web of Science ®Google Scholar
• Dhruv Anand D, Kumar R. Effect of thickness and grain size on flow stress of very thin brass sheets. Procedia Mater Sci. 2014;6:154–160.
   Google Scholar
• Ghosh AK. A numerical analysis of the tensile test for sheet metals. Metall Trans A. 1977 August;8A:1221–1232.
   Google Scholar
• Khlystov N, Lizardo D, Matsushita K, et al. Uniaxial tension and compression testing of materials. Lab Report. 2013 Sept 25.
   Google Scholar
• Sandeep M, Jayahari L, Satyanarayana K, et al. Evaluation and optimization of material properties of brass at Subzero temperature using Taguchi Robust design. Mater Today Proc. 2019;18:4458–4465.
   Google Scholar
• Ramanjaneyulu P, Venkataramaiah P, Reddy KD. Multi parameter optimization of deep drawing for cylindrical cup formation on brass sheets using grey relational analysis. Mater Today Proc. 2019;18:2772–2778.
   Google Scholar
• Farabi E, Zarei-Hanzaki A, Abedi HR. High temperature formability prediction of dual phase brass using phenomenological and physical constitutive models. J Mater Eng Perform. 2015;24(1):209–220.
   PubMed Web of Science ®Google Scholar
• Meena K, Kumar A, Pandya SN. Optimization of friction stir processing parameters for 60/40 brass using Taguchi method. Mater Today Proc. 2017;1978–1987.
   Google Scholar
• Stalin B, Ravichandran M, Vadivel K, et al. Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method. Mater Today Proc. 2019;2214–7853.
   Google Scholar
• Krishnan JY, Sundar SP, Karthikeyan L, et al. Experimental optimization of cutting parameters in turning of brass alloy using Taguchi method. Mater Today Proc. 2020;2214–7853.
   Google Scholar
• Alagarsamy SV, Ravichandran M, Meignanamoorthy M, et al. Prediction of surface roughness and tool wear in milling process on brass (C26130) alloy by Taguchi technique. Mater Today Proc. 2019;2214–7853.
   Google Scholar
• Shojaeefard MH, Khalkhali AF, Akbari M, et al. Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters. 2013;0261–3069.
   Google Scholar
• Chen D-C, Huang J-Y. Design of brass alloy drawing process using Taguchi method. 2007;0921–5093.
   Google Scholar
• Sharififar M, Mousavi SAAA. Tensile deformation and fracture behavior of CuZn5 brass alloy at high temperature. Mater Sci Eng A. 2013;0921–5093.
   Google Scholar
• Bharadwaja K, Rao SS, Rao TB. Mechanical behavior & analysis of epoxy, Al2O3 composites. 2020;2249–8958.
   Google Scholar
• Harish M, Rao SS, Rao BN. On machining of Ti-6Al-4V alloy and its parameters optimization using the modified Taguchi approach. 2020;0193–4120.
   Google Scholar
• Dharavath B, Ul Haq A, Buddi T, et al. Comparative study of ASS 316L on formability at room temperature and super plastic region. Adv Mater Process Technol. Taylor & Francis. 2020:1–12. DOI:10.1080/2374068X.2020.1728648
   Google Scholar
• Kosaraju S, Singh SK, Buddi T, et al. Evaluation and characterization of ASS316L at sub-zero temperature. Adv Mater Process Technol. Taylor & Francis. 2020:1–11. DOI:10.1080/2374068X.2020.1728650
   Google Scholar
• Haq AU, Kavit AK, Rao T, et al. Evaluation and optimization of material properties of ASS 316L at elevated temperatures using response surface methodology. Elsevier Mater Today. 2019;18:4589–4597.
   Google Scholar
• Harshini D, Ul Haq A, Buddi T, et al. Comparative study on mechanical behavior of ASS 316L for low and high temperature applications. Mater Today Proc. 2019;19:767–771.
   Google Scholar