Development and performance analysis of out-of-autoclave curing process for CFRP composites

References

• Chohan JS, Boparai KS, Singh R, et al. Manufacturing techniques and applications of polymer matrix composites: a brief review. Adv Mater Process Technol. 2020;1–11.
   Google Scholar
• Sutter J, Kenner WS, Pelham L, et al. Comparison of autoclave and out-of-autoclave composites. NASA Technical Reports Server, Material Science. 2010; 1–15
   Google Scholar
• Villareal H, Unger S, Lee FW. Advancement of out of autoclave (OOA) technology at tencate advanced composites, USA. SAMPE Brazil Conference Proc. 2012; 1–22
   Google Scholar
• Ogale A, Potluri P, Rittenschober B, et al. Out-of-autoclave curing of composites for high temperature aerospace applications., SAMPE Conference. Seattle; 2014.
   Google Scholar
• Drakonakis VM, Seferis JC, Doumanidis CC. Curing pressure influence of out-of-autoclave processing on structural composites for commercial aviation. Adv Mater Sci Eng. 2013;1–14
   Google Scholar
• Brillant M. Out-of-autoclave manufacturing of complex shape composite laminates. PhD Thesis. Montreal: McGill University Library. 2010.
   Google Scholar
• Chen C, Poursartip A, Fernlund G. Cure-dependent microstructures and their effect on elastic properties of interlayer toughened thermoset composites. Compos Sci Technol. 2020;197:108241.
   Web of Science ®Google Scholar
• Schlimbach J, Ogale A Quickstep: beyond out of autoclave curing. SAMPE Conference. Long Beach; 2011.
   Google Scholar
• Khan LA, Kausar A, Day RJ. Aerospace composite cured by quickstep and autoclave processing techniques: evaluation and comparison of reaction progress. Aerosp Sci Technol. 2017;65:100–105.
   Web of Science ®Google Scholar
• Marsh G. Quick stepping to fast fluid curing. Reinf Plast. 2006;50.7:20–25.
   Google Scholar
• Zhou WY, Qi SH, Zhao HZ, et al. Thermally conductive silicone rubber reinforced with boron nitride particle. Polym Composites. 2007;28.1:23–28.
   Web of Science ®Google Scholar
• Bogaard RH. Thermal conductivity of selected stainless steels. Thermal Conductivity 18. Boston, MA: Springer; 1985. 175–185.
   Google Scholar
• Singh K. Mechanical properties of self curing concrete studied using polyethylene glycol-400: a-review. Mater Today Proc. 2020;37(2):2864–2871.
   Google Scholar
• Nuhiji B, Bower MP, Swait T, et al. Simulation of carbon fibre composites in an industrial microwave. Mater Today Proc. 2021;34(1):82–92.
   Google Scholar
• Guan C, Zhan L, Liu G, et al. Optimization of a high-pressure microwave curing process for T800/X850 carbon fibre-reinforced plastic. High Perform Polym. 2020;32(1):30–38.
   Web of Science ®Google Scholar
• Joshi SC, Bhudolia SK. Microwave–thermal technique for energy and time efficient curing of carbon fibre reinforced polymer prepreg composites. J Compos Mater. 2014;48(24):3035–3048.
   Web of Science ®Google Scholar
• Mesogitis T, Kratz J, Skordos AA. Heat transfer simulation of the cure of thermoplastic particle interleaf carbon fibre epoxy prepregs. J Compos Mater. 2018;53(15):2053–2064.
   Web of Science ®Google Scholar
• Kulkarni PV, Sawant PJ, Kulkarni VV. Fatigue life prediction and modal analysis of carbon fiber reinforced composites. Adv Mater Process Technol. 2018;4(4):651–659.
   Google Scholar
• Schlimbach J, Ogale A, Schimmel. Quickstep processing to control exothermic reaction during the manufacture of thick laminates. Plastics Rub Comp. 2009;38(9–10):374–378.
   Web of Science ®Google Scholar
• Ghosh N, Pal PK, Nandi G. Investigation on dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using grey based Taguchi method. Adv Mater Process Technol. 2018;4(3):385–401.
   Google Scholar
• Muñoz-Escalona P, Shokrani A, Newman ST. Optimal cutting conditions towards sustainable machining when slot milling aluminium alloy. Adv Mater Process Technol. 2016;2(4):480–489.
   Google Scholar
• Hollaway LC. Key issues in the use of fibre reinforced polymer (FRP) composites in the rehabilitation and retrofitting of concrete structures. Woodhead Publishing Ltd; UK. 2011; 3-74.
   Google Scholar
• Centea T, Grunenfelder LK, Nutt SR. A review of out-of-autoclave prepregs–Material properties, process phenomena, and manufacturing considerations. Compos Part A Appl Sci Manuf. 2015;70:132–154.
   Web of Science ®Google Scholar
• Chang CY. Numerical study on filling process in progressive compression method. Adv Compos Mater. 2019;28(sup1):37–51.
   Web of Science ®Google Scholar
• Shah DB, Patel KM, Patel AI, et al. Experimental investigation on spring-back deformation during autoclave curing of parabolic antenna reflectors. Compos Part A. 2018;115:134–146.
   Web of Science ®Google Scholar
• Gajjar T, Shah DB, Joshi SJ, et al. Experimental study of thickness gradient and flow simulation in VARTM process. Fibers Polym. 2020;21(2):384–391. Springer Publication
   Google Scholar