Fabrication of AA6061/Al₂O₃ surface composite by double pass friction stir processing and investigation on mechanical and wear properties

References

• Mishra R, Mahoney R, M., et al. High Strain Rate Superplasticity in a Friction Stir Processed 7075 Al Alloy. Scr Mater. 1999;42(2):163–168.
   Web of Science ®Google Scholar
• Mehta K, Badheka V. Wear Behavior of Boron-Carbide Reinforced Aluminum Surface Composites Fabricated by Friction Stir Processing. Wear. 2019;426–427(Part B):975–980.
   Google Scholar
• Naghshehkesh N, Mousavi SE, Karimzadeh F, et al. Effect of Graphene Oxide and Friction Stir Processing on Microstructure and Mechanical Properties of Al5083 Matrix Composite. Mater Res Express. 2019;6(10):106566.
   Google Scholar
• Prabhu S, Perumal E, Arulvel. Development of Multi-Pass Processed AA6082/SiCp Surface Composite Using Friction Stir Processing and Its Mechanical and Tribology Characterization. Surf Coat Technol. 2020;394:125900.
   Web of Science ®Google Scholar
• Zayed EM, El-Tayeb NSM, Ahmed MMZ, et al.Development and Characterization of AA5083 Reinforced with SiC and Al2O3 Particles by Friction Stir Processing; 2019; pp 11-26. https://doi.org/10.1007/978-3-319-79005-3_2.(Accessed: 24 April 2019).
   Google Scholar
• Thapliyal S, Dwivedi DK. Barium Titanate Reinforced Nickel Aluminium Bronze Surface Composite by Friction Stir Processing. Mater Sci Technol. 2018;34(3):366–377.
   Web of Science ®Google Scholar
• Thankachan T, Prakash KS, Kavimani V. Investigating the Effects of Hybrid Reinforcement Particles on the Microstructural, Mechanical and Tribological Properties of Friction Stir Processed Copper Surface Composites. Compos Part B Eng. 2019;174:107057.
   Web of Science ®Google Scholar
• Raaft M, Mahmoud TS, Zakaria HM, et al. Microstructural, Mechanical and Wear Behavior of A390/Graphite and A390/Al2O3 Surface Composites Fabricated Using FSP. Mater Sci Eng A. 2011;528(18):5741–5746.
   Web of Science ®Google Scholar
• Murugarajan A, Srimath N. Effect of Titanium Carbide Reinforcement on Micro Structure and Wear Properties of Annealed AA6082 by Friction Stir Processing. Adv Mater Process Technol. 2020;1–8. DOI:10.1080/2374068X.2020.1865126
   Google Scholar
• Mazaheri Y, Karimzadeh F, Enayati MHH, et al. Technique for Development of A356/Al2O3 Surface Nanocomposite by Friction Stir Processing. J Mater Process Technol. 2011;211(10):1614–1619.
   Web of Science ®Google Scholar
• Shahraki S, Khorasani S, Abdi Behnagh R, et al. Producing of AA5083/ZrO2 Nanocomposite by Friction Stir Processing (FSP). Metall Mater Trans B. 2013;44(6):1546–1553.
   Web of Science ®Google Scholar
• Paidar M, Ojo OO, Ezatpour HR, et al. Influence of Multi-Pass FSP on the Microstructure, Mechanical Properties and Tribological Characterization of Al/B 4 C Composite Fabricated by Accumulative Roll Bonding (ARB). Surf Coat Technol. 2019;361:159–169.
   Web of Science ®Google Scholar
• Węglowski MS. Friction Stir Processing – state of the Art. Arch Civ Mech Eng. 2018;18(1):114–129.
   Web of Science ®Google Scholar
• Bharti S, Ghetiya ND, Patel KM. A Review on Manufacturing the Surface Composites by Friction Stir Processing. Mater Manuf Process. 2021;36(2):135–170.
   Web of Science ®Google Scholar
• Mathur V, B, S. R. P., Patel GC, et al. Reinforcement of Titanium Dioxide Nanoparticles in Aluminium Alloy AA 5052 through Friction Stir Process. Adv Mater Process Technol. 2019;5(2):329–337.
   Google Scholar
• Aruri D, Adepu K, Adepu K, et al. Wear and Mechanical Properties of 6061-T6 Aluminum Alloy Surface Hybrid Composites [(SiC + Gr) and (SiC + Al2O3)] Fabricated by Friction Stir Processing. J Mater Res Technol. 2013;2(4):362–369.
   Google Scholar
• Shen Y-L, Chawla N. On the Correlation between Hardness and Tensile Strength in Particle Reinforced Metal Matrix Composites. Mater Sci Eng A. 2001;297(1–2):44–47.
   Web of Science ®Google Scholar
• Khodabakhshi F, Gerlich AP. On the Correlation between Indentation Hardness and Tensile Strength in Friction Stir Processed Materials. Mater Sci Eng A. 2020;139682. DOI:10.1016/j.msea.2020.139682
   Web of Science ®Google Scholar
• Singh L, Singh B, Saxena KK. Manufacturing Techniques for Metal Matrix Composites (MMC): an Overview. Adv Mater Process Technol. 2020;6(2):441–457.
   Google Scholar
• Sun HQ, Shi Y-N, Zhang M-X. Wear Behaviour of AZ91D Magnesium Alloy with a Nanocrystalline Surface Layer. Surf Coat Technol. 2008;202(13):2859–2864.
   Web of Science ®Google Scholar
• Mazaheri Y, Jalilvand MM, Heidarpour A, et al. Tribological Behavior of AZ31/ZrO2 Surface Nanocomposites Developed by Friction Stir Processing. Tribol Int. 2020;143:106062.
   Web of Science ®Google Scholar
• Lim SC, Ashby MF. Overview No. 55 Wear-Mechanism Maps. Acta Metall. 1987;35(1):1–24.
   Google Scholar
• Arora HS, Singh H, Dhindaw BK. Wear Behaviour of a Mg Alloy Subjected to Friction Stir Processing. Wear. 2013;303(1–2):65–77.
   Web of Science ®Google Scholar
• Abbasi M, Bagheri B, Dadaei M, et al. The Effect of FSP on Mechanical, Tribological, and Corrosion Behavior of Composite Layer Developed on Magnesium AZ91 Alloy Surface. Int J Adv Manuf Technol. 2015;77(9–12):2051–2058.
   Web of Science ®Google Scholar
• Zhang YS, Han Z, Wang K, et al. Wear Behaviors of Nanocrystalline Surface Layer of Pure Copper. Wear. 2006;260(9–10):942–948.
   Web of Science ®Google Scholar
• Zhang D, Gou Y, Liu Y, et al. A Composite Anodizing Coating Containing Superfine Al2O3 Particles on AZ31 Magnesium Alloy. Surf Coat Technol. 2013;236:52–57.
   Web of Science ®Google Scholar
• Bharti S, Ghetiya ND, Patel KM. Micro-Hardness and Wear Behavior of AA2014/Al2O3 Surface Composite Produced by Friction Stir Processing. SN Appl Sci. 2020;2(11):1760.
   Web of Science ®Google Scholar
• Alidokht SA, Abdollah-zadeh A, Soleymani S, et al. Evaluation of Microstructure and Wear Behavior of Friction Stir Processed Cast Aluminum Alloy. Mater Charact. 2012;63:90–97.
   Web of Science ®Google Scholar