References
- Rai R, De A, Bhadeshia HKDH, et al. Review: friction stir welding tools. Sci Tec Weld Joining. 2011;16(4):325.
- Zhang YN, Cao X, Larose S, et al. Review of tools for friction stir welding and processing. Canad Metallurgi Quarter. 2012;51(3):250–261.
- Mishra RS, Ma ZY. Friction stir welding and processing. Mate Sci Eng R. 2005;50(1–2):1–78.
- Meilinger A, Torok I. The importance of friction stir welding tool. Prod Proc Syst. 2013;6(1):25–34.
- Sato YS, Nagahama Y, Mironov S, et al. Park and Satoshi Hirano, Microstructural studies of friction stir welded Zircaloy-4. Scr Mater. 2012;67(3):241–244.
- Kumar B, Dwibedi S, Bag S, et al. A comparative study on microstructural and mechanical behaviour of spot welded Ti-6Al-4V alloy in as-welded and solution treated condition. Adv Mater Process Technol. 2021;1–15. DOI:10.1080/2374068X.2021.1934648
- Fujii H, Rintaro U, Ring C, et al. Friction stir welding of ultrafine grained IF and carbon steels. Trans JWRI. 2006;35(1):47-52.
- Chung YD, Fujii H, Ueji R, et al. Friction stir welding of high carbon steel with excellent toughness and ductility. Scr Mater. 2010;63(2):223–226.
- Cui L, Fujii H, Tsuji N, et al. Friction stir welding of a high carbon steel. Scr Mater. 2007;56(7):637–640.
- Palanivel R, Koshy Mathews P. Prediction and optimization of process parameter of friction stir welded AA5083-H111 aluminum alloy using response surface methodology. J Cent South Univ. 2012;19(1):1–8.
- Parida B, Mohapatra M, Biswas P, Mandal NR. Study of mechanical and micro-structural properties of friction stir welded Al-alloy. International Journal of Emerging Technology and Advanced Engineering. 2012 Oct;2(10):307-12.
- Akinlabi ET, Reddy RD, Akinlabi SA. Microstructural characterizations of dissimilar friction stir welds. InProceedings of the World Congress on Engineering 2012 (Vol. 3).
- Dwivedi VK, Sharma A. Influence on the tensile properties of AA7075-T6 under different conditions during friction stir welding processShahabuddin. IOP Conf Ser Mater Sci Eng. 2019;691(1):012001.
- Cavaliere P, De Santis A, Panella F, et al. Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding. Mater Des. 2009;30(3):609–616.
- Xuefeng Z, Feng F, Jianjing J. Solidification microstructure of M2 high speed steel by different casting technologies. China Foundry. 2011 Aug;8(3).
- Cha SI, Hong SH. Microstructures of binderless tungsten carbides sintered by spark plasma sintering process. Mat Sci Eng. 2003;A356:381–389.
- Kundu J, Singh H. Modelling and analysis of process parameters in friction stir welding of AA 5083-H321 using response surface methodology. Adv Mater Proc Technol (Taylor and Francis). 2018;4(2):183–199.
- Meshram MP, Tamboli RR, Kodli BK, et al. Texture analyses of friction stir welded austenitic stainless steel AISI-316L. Adv Mater Process Technol. 2018;4(2):244–254.
- Sharma A, Dwivedi VK, Singh YP. Effect on ultimate tensile strength on varying rotational speed, plunge depth and welding speed during friction stir welding process of aluminium alloy AA7075. Mater Today Proc. 2019;26:2055–2057.
- Armstrong RW. The hardness and strength properties of WC-Co composites. Materials. 2011;4(7):1287–1308.
- Kim C-S, Microstructural mechanical property relationships in WC-Co composites, Ph. D. Thesis, Carnegie Mellon University, Pittsburgh, PA.
- Hussainova I. Effect of microstructure on the erosive wear of titanium carbide-based cermets. Wear. 2003;255(1–6):121–128.
- Sharma A, Dwivedi VK. Comparison of micro structural and mechanical properties of aluminium alloy AA6062 on FSW and TIGW processes. Mater Today Proc. 2019;25:903–907.
- Wei Y, Jinglong L, Xiong J, et al. Joining aluminum to titanium alloy by friction stir lap welding with cutting pin. Mater Charact. 2012;71:1–5.
- Khodir SA, Morisada Y, Ueji R, et al. Microstructures and mechanical properties evolution during friction stir welding of SK4 high carbon steel alloy. Mater Sci Eng A. 2012;558:572–578.