Characterizations of AA5083-H116 produced by friction stir spot welding technique

References

• Ikumapayi OM, Akinlabi ET. Recent advances in keyhole defects repairs via refilling friction stir spot welding. Mater Today Proc. 2019;18:2201–2208.
   Google Scholar
• Shen Z, Ding Y, Gerlich AP. Advances in friction stir spot welding. Critl Rev Solid State Mater Sci. 2020;45:457–534.
   Web of Science ®Google Scholar
• Mubiayi MP, Akinlabi ET. An overview on friction stir spot welding of dissimilar materials. Trans Eng Technol. 2015:537–549. Springer, Dordrecht. DOI:10.1007/978-94-017-7236-5_38
   Google Scholar
• Prasad NE, Wanhill RJ. Aerospace Materials and Material Technologies. In:Eswara Prasad, Wanhill RJH. Vol. 1, Aerospace Materials. Singapore: Springer; 2017. DOI:10.1007/978-981-10-2134-3
   Google Scholar
• Tamasgavabari R, Ebrahimi AR, Abbasi SM, et al. The effect of harmonic vibration with a frequency below the resonant range on the mechanical properties of AA-5083-H321 aluminum alloy GMAW welded parts. Mater Sci Eng A. 2018;736:248–257.
   Web of Science ®Google Scholar
• Zhu C, Cheon J, Tang X, et al. Molten pool behaviors and their influences on welding defects in narrow gap GMAW of 5083 Al-alloy. Int J Heat Mass Transfer. 2018;126:1206–1221.
   Web of Science ®Google Scholar
• Jie Y, Cao S, Li L, et al. Effect of welding current on morphology and microstructure of Al alloy T-joint in double-pulsed MIG welding. Trans Nonferrous Met Soc China. 2015;25:3204–3211.
   Web of Science ®Google Scholar
• Lala SD, Biswas A, Debbarma J, et al. Study of hardness of the weld bead formed by partial hybrid welding by metal inert gas welding and submerged arc welding at three different heat inputs. Mater Today Proc. 2018;5:13650–13657.
   Google Scholar
• Sridharan N, Isheim D, Seidman DN, et al. Colossal super saturation of oxygen at the iron-aluminum interfaces fabricated using solid state welding. Scr Mater. 2017;130:196–199.
   Web of Science ®Google Scholar
• Nassiri A, Abke T, Daehn G. Investigation of melting phenomena in solid-state welding processes. Scr Mater. 2019;168:61–66.
   Web of Science ®Google Scholar
• Abegunde OO, Akinlabi ET, Madyira DM. Force feedback analysis: friction stir welding of aluminium metal matrix composite. In: Proceedings of the World Congress on Engineering; 2016 Jun 29–Jul 1; London, U.K.
   Google Scholar
• Abegunde OO, Akinlabi ET, Madyira D. Microstructural evolution and mechanical characterizations of AL-TiC matrix composites produced via friction stir welding. Materiali in Tehnologije. 2017;51:297–306.
   Web of Science ®Google Scholar
• Kumar A, Singh R, Singh I. A review of metal inert gas welding on aluminium alloys. Int J Eng Sci Res Technol. 2017;6:453–456.
   Google Scholar
• Sekhar SR, Chittaranjandas V, Govardhan D, et al. Effect of tool rotational speed on friction stir spot welded AA5052-H38 aluminum alloy. Mater Today Proc. 2018;5:5s536–5543.
   Google Scholar
• Peasura P, Watanapa A. Influence of shielding gas on aluminum alloy 5083 in gas tungsten arc welding. Procedia Eng. 2012;29:2465–2469.
   Google Scholar
• Atlas Steel. Aluminium alloy data sheet 5083. 13 August. 2019. https://www.atlassteels.com.au/documents/Atlas_Aluminium_datasheet_5083_rev_Oct_2013.pdf
   Google Scholar
• Gerlich A, Su P, North T. Tool penetration during friction stir spot welding of Al and Mg alloys. J Mater Sci. 2005;40:6473–6481.
   Web of Science ®Google Scholar
• Ikumapayi OM, Akinlabi ET, Pal SK, et al. A survey on reinforcements used in friction stir processing of aluminium metal matrix and hybrid composites. Procedia Manuf. 2019;35:935–940.
   Google Scholar
• E407-07(2015)e1, standard practice for microetching metals and alloys. West Conshohocken (PA): ASTM International; 2015. www.astm.org.
   Google Scholar
• ASTM. E112-12, standard test methods for determining average grain size. West Conshohocken (PA): ASTM International; 2012. www.astm.org
   Google Scholar
• Ikumapayi O, Akinlabi E, Majumdar J, et al. Influences of 17-4PH stainless steel and α β titanium alloy powders for corrosion susceptibility on friction stir-processed AA7075-T651 aluminium matrix composites. J Bio Tribocorros. 2019;5:1–11.
   Google Scholar
• Arockiasamy P, Sheela X, Thenmozhi G, et al. Evaluation of corrosion inhibition of mild steel in 1 M hydrochloric acid solution by Mollugo cerviana. Int J Corros. 2014;2014:1–7.
   Google Scholar
• ASTM. E384-17, standard test method for microindentation hardness of materials. West Conshohocken (PA): ASTM International; 2017. www.astm.org
   Google Scholar
• Li W, Chu Q, Yang X, et al. Microstructure and morphology evolution of probeless friction stir spot welded joints of aluminum alloy. J Mater Process Technol. 2018;252:69–80.
   Web of Science ®Google Scholar
• Zhou L, Li G, Zhang R, et al. Microstructure evolution and mechanical properties of friction stir spot welded dissimilar aluminum-copper joint. J Alloys Compounds. 2019;775:372–382.
   Web of Science ®Google Scholar
• Mulaba-Kapinga D, Nyembwe KD, Ikumapayi OM, et al. Mechanical, electrochemical and structural characteristics of friction stir spot welds of aluminium alloy 6063. Manuf Rev. 2020;7:25.
   Web of Science ®Google Scholar
• Siddharth S, Senthilkumar T, Chandrasekar M. Development of processing windows for friction stir spot welding of aluminium Al5052/copper C27200 dissimilar materials. Trans Nonferrous Met Soc China. 2017;27:1273–1284.
   Web of Science ®Google Scholar
• Tao W, Yong Z, Xuemei L, et al. Special grain boundaries in the nugget zone of friction stir welded AA6061-T6 under various welding parameters. Mater Sci Eng A. 2016;671:7–16.
   Web of Science ®Google Scholar
• Sato YS, Park SHC, Kokawa H. Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys. Metall Mater Trans A. 2001;32:3033–3042.
   Web of Science ®Google Scholar
• Ikumapayi O, Akinlabi E, Sharma A, et al. Tribological, structural and mechanical characteristics of friction stir processed aluminium-based matrix composites reinforced with stainless steel micro-particles. Eng Solid Mech. 2020;8:253–270.
   Google Scholar
• Offor P, Okorie B, Ezema F, et al. Synthesis and characterization of nanocrystalline zinc sulphide thin films by chemical spray pyrolysis. J Alloys Compounds. 2015;650:381–385.
   Web of Science ®Google Scholar
• Sadykov V, Isupova L, Tsybulya S, et al. Effect of mechanical activation on the real structure and reactivity of iron (III) oxide with corundum-type structure. J Solid State Chem. 1996;123:191–202.
   Web of Science ®Google Scholar
• Paik JK. Mechanical properties of friction stir welded aluminum alloys 5083 and 5383. Int J Naval Archit Ocean Eng. 2009;1:39–49.
   Web of Science ®Google Scholar
• Ikumapayi O, Akinlabi E, Abegunde O, et al. Electrochemical investigation of calcined agrowastes powders on friction stir processing of aluminium-based matrix composites. Mater Today Proc. 2020;26(2):3238–3245. DOI:10.1016/j.matpr.2020.02.906
   Google Scholar
• Mutombo K, Du Toit M. Corrosion fatigue behaviour of aluminium alloy 6061-T651 welded using fully automatic gas metal arc welding and ER5183 filler alloy. Int J Fatigue. 2011;33:1539–1547.
   Web of Science ®Google Scholar
• Dovletoglou E, Skarvelis P, Stergiou V, et al. Effect of corrosion exposure on the mechanical performance of 2024 aluminum alloy electron beam welded joints. Procedia Struct Integr. 2018;10:73–78.
   Google Scholar
• Sinhmar S, Dwivedi DK. Effect of weld thermal cycle on metallurgical and corrosion behavior of friction stir weld joint of AA2014 aluminium alloy. J Manuf Processes. 2019;37:305–320.
   Web of Science ®Google Scholar
• Naik DB, Rao CV, Rao KS, et al. Optimization of friction stir welding parameters to improve corrosion resistance and hardness of AA2219 aluminum alloy welds. Mater Today Proc. 2019;15:76–83.
   Google Scholar
• Gavrish PA, Turchanin MA, Perig AV. Analysis of the reasons for the penetration of copper into steel during welding. Adv Mater Process Technol. 2021;7:363–379.
   Google Scholar
• Dwibedi S, Bag S. Influence of process parameters on microstructural evolution, solidification mode, and impact strength in joining of stainless steel thin sheets. Adv Mater Process Technol. 2021;1–16. DOI:10.1080/2374068X.2021.1927645
   Google Scholar
• Jadav H, Badheka V, Upadhyay G, et al. Dissimilar welding of magnesium alloy to aluminium alloy: a review. Adv Mater Process Technol. 2021;1–28. DOI:10.1080/2374068X.2021.2016564
   Google Scholar