References
- Thomas WM, Nicholas ED, Needham JC, et al. Friction stir welding. International Patent Application 1991; No. PCT/GB92/02203 and Great Britain Patent Application No. 9125978.8.
- Bhardwaj N, Ganesh Narayanan R, Dixit US, et al. Recent developments in friction stir welding and resulting industrial practices. Adv. mat. proc. technol. 2019;5(3):461–496.
- Sahu PK, Kumari K, Pal S, et al. Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints. Adv. Manuf. 2016;4(3):237–247.
- Singh B, Singhal P, Saxena KK. Effect of transverse speed on mechanical and microstructural properties of friction stir welded aluminium AA2024-T351. Adv. mat. proc. technol.10.1080/2374068X.2020.1728642.
- Shanavas S, Edwin Raja Dhas J. Parametric optimization of friction stir welding parameters of marine grade aluminium alloy using response surface methodology. Trans Nonferrous Met Soc China. 2017;27(11):2334–2344.
- Tal R, Shaikh S, Pallavi P. Adult bone marrow progenitors become decidual cells and contribute to embryo implantation and pregnancy. PLoS Biology. 2019;17(9). DOI:10.1371/journal.pbio.3000421
- Arora KS, Pandey S, Schaper M, et al. Effect of process parameters on friction stir welding of aluminum alloy 2219-T87. Int J Adv Manuf Technol. 2010;50(9–12):941–952.
- Kucukrendeci I. Mechanical and microstructural properties of EN AW-6060 aluminum alloy joints produced by friction stir welding, Bulletin of the polish academy of sciences technical sciences, 2015, 63, p 475–478.
- Rajakumar S, Balasubramanian V. Predicting grain size and tensile strength of friction stir welded joints of AA7075-T 6 aluminium alloy. Mater Manuf Processes. 2012;27(1):78–83.
- Padhy GK, Wu CS, Gao S. Friction stir based welding and technologies - parameters, microstructures and applications, A review. J Mater Sci Technol. 2018;34:1–38.
- Dwivedi SP. Effect of process parameters on tensile strength of friction stir welding A356/C355 aluminium alloys joint. J Mech Sci Technol. 2014;28(1):285~291.
- Rambabu G, Balaji Naik D, Venkata Rao CH, et al. Optimization of friction stir welding parameters for improved corrosion resistance of AA2219 aluminum alloy joints. Def Technol. 2015;11(4):330–337.
- Prabhu RSB, Shettigar AK, Patel GC M, et al., Influence of process variables on joint attributes of friction stir welded aluminium matrix composite. Adv. mat. proc. technol.10.1080/2374068X.2020.1860588.
- Prasanna P, Penchalayya C, Anandamohana RD. Effect of tool pin profiles and heat treatment process in the friction stir welding of AA 6061 aluminium alloy. Am J Eng Res. 2013;2:7–15.
- Ahmed MMZ, Wynne BP, Rainforth WM, et al. Effect of tool geometry and heat input on the hardness, grain structure, and crystallographic texture of thick-section friction stir-welded aluminium. Metall. Mater. Trans. A. 2019;50:271–284. 10.1007/s11661-018-4996-2
- Ilangovan M, Rajendra BS, Balasubramanian V. Effect of tool pin profile on microstructure and tensile properties of friction stir welded dissimilar AA 6061-AA 5086 aluminium alloy joints. Defence Technol. 2015;11(2):174–184.
- Malika V, Sanjeev NK, Hebbar HS, et al. Investigations on the effect of various tool pin profiles in friction stir welding using finite element simulations. Procedia Eng. 2014;97:1060–1068.
- Mohammadzadeh Jamalian H, Farahani M, Besharati Givi MK, et al. Study on the effects of friction stir welding process parameters on the microstructure and mechanical properties of 5086-H34 aluminum welded joints. Int J Adv Manuf Technol. 2016;83(1–4):611–621.
- Derazkola HA, Elyasi M. The influence of process parameters in friction stir welding of Al-Mg alloy and polycarbonate. J Manuf Processes. 2018;35:88–98.
- Hynes NRJ, Velu PS. Effect of rotational speed on Ti-6Al-4V-AA 6061 friction welded joints. J Manuf Processes. 2018;32:288–297.
- Elangovan K, Balasubramanian V, Valliappan M. Effect of tool pin profile and tool rotational speed on mechanical properties of friction stir weldedAA6061 aluminium alloy. Mater Manuf Processes. 2008;23(3):251–260.
- Peel M, Steuwer A, Preuss M, et al. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Materialia. 2003;51(16):4791–4801.
- Sahu PK, Pal S. Mechanical properties of dissimilar thickness aluminium alloy weld by single/double pass FSW. J Mater Process Technol. 2017;243:442–455.
- Kumbhar NT, Sahoo SK, Samajdar I, et al. Microstructure and micro textural studies of friction stir welded aluminium alloy 5052. Mater Des. 2011;32(3):1657–1666.
- Kwon YJ, Shim SB, Park DH. Friction stir welding of 5052 aluminum alloy plates. Trans Nonferrous Met Soc China. 2009;19:23–27.
- Sahu PK, Pal S, Pal SK, et al. Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructures of dissimilar Al/Cu friction stir welding joints. J Mater Process Technol. 2016;23:555–567.
- Palanivel R, Mathews PK, Murugan N, et al. Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys. Mater Des. 2012;4:07–16.
- Moradi MM, Aval HJ, Jamaati R, et al. Microstructure and texture evolution of friction stir welded Dissimilar aluminum alloys AA2024 and AA6061. J Manuf Processes. 2018;32:1–10.
- Buffa G, De M, Sciortino LE, et al. Dissimilar titanium/aluminum friction stir welding lap joints by experiments and numerical simulation. Adv. Manuf. 2016;4(4):287–295.
- He X, Gu F, Ball A. A review of numerical analysis of friction stir welding. Pro Mater Sci. 2014;65:1–66.
- Elangovan K, Balasubramanian V. Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy. J Mater Process Technol. 2008;200(1–3):163–175.
- Mazaheri Y, Heidarpour A, Jalilvand MM, et al. Effect of friction stir processing on the microhardness, wear and corrosion behavior of Al6061 and Al6061/SiO2 nanocomposites. J Mater Eng Perform. 2019;28(8):4826–4837.
- Ghetiya ND, Patel KM. Prediction of tensile strength and microstructure characterization of immersed friction stir welding of aluminium alloy AA2014-T4. Indian J. Eng. Mat. Sci. 2015;22:133–140.
- Pandya SN, Menghani JV. A parametric investigation on effects of friction stir welding parameters on mechanical properties of AA6061-T6 to Cu dissimilar joints. Indian J Eng Mat Sci. 2018;25:131–146.
- Sahu PK, Pal S. Influence of metallic foil alloying by FSW process on mechanical properties and metallurgical characterization of AM20 Mg alloy. Mater Sci Eng A. 2017;684:442–455.