The effect of pin shape on the corrosion behaviour of friction stir welded 1080 aluminium alloy

References

• Çam G, İpekoğlu G. Recent developments in joining of aluminum alloys. Int J Adv Manuf Technol. 2017;91(5):1851–1866.
   Web of Science ®Google Scholar
• Li S, Mi G, Wang C. A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: morphology, microstructure and mechanical properties. J Manuf Processes. 2020;53:12–20.
   Web of Science ®Google Scholar
• Samal P, Vundavilli PR, Meher A, et al. Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties. J Manuf Processes. 2020;59:131–152.
   Web of Science ®Google Scholar
• Vandersluis E, Emadi P, Andilab B, et al. The role of silicon morphology in the electrical conductivity and mechanical properties of As-Cast B319 aluminum alloy. Metall Mater Trans A. 2020;51(4):1874–1886.
   Web of Science ®Google Scholar
• Sinhmar S, Dwivedi D. Enhancement of mechanical properties and corrosion resistance of friction stir welded joint of AA2014 using water cooling. Mater Sci Eng A. 2017;684:413–422.
   Web of Science ®Google Scholar
• Meshram SD, Paradkar AG, Reddy GM, et al. Friction stir welding: an alternative to fusion welding for better stress corrosion cracking resistance of maraging steel. J Manuf Processes. 2017;25:94–103.
   Web of Science ®Google Scholar
• Kah P, Rajan R, Martikainen J, et al. Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys. Int J Mech Mater Eng. 2015;10(1):26.
   Google Scholar
• Mishra RS, De PS, and Kumar N. Friction stir welding and processing: science and engineering. 2014; Springer International Publishing Switzerland: Springer.
   Google Scholar
• Kumar Rajak D, Pagar DD, Menezes PL, et al. Friction-based welding processes: friction welding and friction stir welding. J Adhesi Sci Technol. 2020;34(24):2613–2637.
   Web of Science ®Google Scholar
• Liu P, Sun S, Hu J. Effect of laser shock peening on the microstructure and corrosion resistance in the surface of weld nugget zone and heat-affected zone of FSW joints of 7050 Al alloy. Opt Laser Technol. 2019;112:1–7.
   Web of Science ®Google Scholar
• Hussein W, Al-Shammari MA, editors. Fatigue and fracture behaviours of FSW and FSP Joints of AA5083-H111 aluminium alloy. IOP Conference Series: Materials Science and Engineering ; 2018; Istanbul, Turkey: IOP Publishing.
   Google Scholar
• Wahab M, Dewan M, Huggett D, et al. Challenges in the detection of weld-defects in friction-stir-welding (FSW). Adv Mater Process Technol. 2019;5(2):258–278.
   Google Scholar
• Rajendran C, Srinivasan K, Balasubramanian V, et al. Identifying the combination of friction stir welding parameters to attain maximum strength of AA2014-T6 aluminum alloy joints. Adv Mater Process Technol. 2018;4(1):100–119.
   Google Scholar
• Delir Nazarlou R, Omidbakhsh F. Evaluation of bulk defects area in friction stir welded 1080 aluminum alloy utilizing electrical resistivity measurements. J Adhesi Sci Technol. 2021;1–11. DOI:10.1080/01694243.2021.1992978
   Web of Science ®Google Scholar
• Anand R, Sridhar V. Studies on process parameters and tool geometry selecting aspects of friction stir welding–A review. Mater Today Proc. 2020;27:576–583.
   Google Scholar
• Delir Nazarlou R, Omidbakhsh F, Mollaei Milani J. Effect of rotational speed in friction stir welding on the material transfer mechanism in commercial pure aluminum. J Welding Sci and Technol of Iran. 2020;6(1):9–17.
   Google Scholar
• Rajendran C, Srinivasan K, Balasubramanian V, et al. Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy. Trans Nonferrous Met Soc China. 2019;29(9):1824–1835.
   Web of Science ®Google Scholar
• Amini K, Gharavi F. Influence of welding speed on corrosion behaviour of friction stir welded AA5086 aluminium alloy. J Cent South Univ. 2016;23(6):1301–1311.
   Web of Science ®Google Scholar
• Zhang C, Cao Y, Huang G, et al. Influence of tool rotational speed on local microstructure, mechanical and corrosion behavior of dissimilar AA2024/7075 joints fabricated by friction stir welding. J Manuf Processes. 2020;49:214–226.
   Web of Science ®Google Scholar
• Thangaiah SI, Sevvel P, Satheesh C, et al. Experimental study on the role of tool geometry in determining the strength & soundness of wrought Az80a Mg alloy joints during FSW process. FME Trans. 2018;46(4):612–622.
   Web of Science ®Google Scholar
• Babu S, Sevvel P, Kumar RS. Simulation of heat transfer and analysis of impact of tool pin geometry and tool speed during friction stir welding of AZ80A Mg alloy plates. J Mech Sci Technol. 2020;34(10):4239–4250.
   Web of Science ®Google Scholar
• Dhanesh Babu S, Sevvel P, Senthil Kumar R, et al. Development of thermo mechanical model for prediction of temperature diffusion in different FSW tool pin geometries during joining of AZ80A Mg alloys. J Inorg Organomet Polym Mater. 2021;31(7):3196–3212.
   Web of Science ®Google Scholar
• Yin D, Liu H, Chen Y, et al. Effect of grain size on fatigue-crack growth in 2524 aluminium alloy. Int J Fatigue. 2016;84:9–16.
   Web of Science ®Google Scholar
• Ramana GV, Yelamasetti B, and Vardhan TV. Effect of FSW process parameters and tool profile on mechanical properties of AA 5082 and AA 6061 welds. Mater Today Proc. 2021;46:826–830.
   Google Scholar
• Delir Nazarlou R, Nemati Akhgar B, Omidbakhsh F. Optimization of friction stir welding parameters with Taguchi method for maximum electrical conductivity in Al-1080 welded sections. Sci Iran. 2021;28(4):2250–2258.
   Web of Science ®Google Scholar
• Suresh Kumar R, Senthil Kumar S, Rajendran C, et al. Investigation on corrosion behaviour of LM25-SiCp composite using Taguchi method. Adv Mater Sci Eng. 2022;2022:1–9.
   Web of Science ®Google Scholar
• Prabhuraj P, Rajakumar S. Experimental investigation on corrosion behavior of friction stir welded AA7075-T651 aluminium alloy under 3.5% wt NaCl environment. Mater Today Proc. 2021;45:5878–5885.
   Google Scholar
• Mansfeld F, Oldham KB. A modification of the Stern-Geary linear polarization equation. Corros Sci. 1971;11(10):787–796.
   Web of Science ®Google Scholar
• Sevvel P, Satheesh C, Senthil Kumar R. Generation of regression models and multi-response optimization of friction stir welding technique parameters during the fabrication of AZ80A Mg alloy joints. Trans Can Soc Mech Eng. 2019;44(2):311–324.
   Web of Science ®Google Scholar
• Satheesh C, Sevvel P, and Kumar RS. Experimental identification of optimized process parameters for FSW of AZ91C Mg alloy using quadratic regression models. Strojniski Vestnik/J Mech Eng. 2020;66(12):736-751.
   Google Scholar
• Abrams H. Grain size measurement by the intercept method. Metallography. 1971;4(1):59–78.
   Google Scholar
• Ma C, Zhou L, Zhang R, et al. Enhancement in mechanical properties and corrosion resistance of 2507 duplex stainless steel via friction stir processing. J Mater Res Technol. 2020;9(4):8296–8305.
   Google Scholar
• Abbas WS, Alali M, Salim J, editors. Effect of rotational speed and tool pin profile on the corrosion rate of friction stir welded AA6061-T3. IOP Conference Series: Materials Science and Engineering ; 2021;Samawah, Iraq: IOP Publishing.
   Google Scholar
• Yaknesh S, Sampathkumar K, Sevvel P. Effect of tool pin geometry and process parameters during FSW of dissimilar alloys of Mg. Mater Res. 2022;25. DOI:10.1590/1980-5373-mr-2021-0508
   Web of Science ®Google Scholar
• Sevvel P, Jaiganesh V. Effect of tool shoulder diameter to plate thickness ratio on mechanical properties and nugget zone characteristics during FSW of dissimilar Mg alloys. Trans Indian Inst Met. 2015;68(1):41–46.
   Google Scholar