Effect of Welding Parameters and Tool pin features on Mechanical Properties of Dissimilar Aluminum Alloy Friction Stir Welds

References

• Su JQ, Nelson TW, Mishra R, et al. Microstructural investigation of friction stir welded 7050-T651 aluminium. Acta Mater. 2003;51:713–729.
   Web of Science ®Google Scholar
• Sutton MA, Yang B, Reynolds AP, et al. Microstructural studies of friction stir welds in 2024-T3 aluminum. Mat Sci Eng A. 2002;323:160–166.
   Web of Science ®Google Scholar
• Dai QL, Wang XY, Hou ZG, et al. Microcavities accompanying a zigzag line in friction stir welded A6082-T6 alloy joint. Sci Technol Weld Join. 2015;20:68–74.
   Web of Science ®Google Scholar
• Malik V, Saxena K. Understanding tool–workpiece interfacial friction in friction stir welding/processing and its effect on weld formation. Adv Mater Process Technol. 2022. DOI:10.1080/2374068X.2022.2036042
   PubMedGoogle Scholar
• Linton VM, Ripley MI. Influence of time on residual stresses in friction stir welds in age hardenable 7xxx aluminium alloys. Acta Mater. 2008;56:4319–4327.
   Web of Science ®Google Scholar
• Komarasamy M, Alagarsamy K, Ely L, et al. Characterization of 3″ through-thickness friction stir welded 7050-T7451 Al alloy. Mater Sci Eng A. 2018;716:55–62.
   Web of Science ®Google Scholar
• Khan NZ, Khan ZA, Siddiquee AN, et al. Analysis of defects in clean fabrication process of friction stir welding. Trans Nonferrous Met Soc China. 2017;27:1507–1516.
   Web of Science ®Google Scholar
• Zaman N, Noor A, Khan ZA, et al. Mechanical and microstructural behavior of friction stir welded similar and dissimilar sheets of AA2219 and AA7475 aluminium alloys. J Alloys Compd. 2017;695:2902–2908.
   Web of Science ®Google Scholar
• Rajendran C, Srinivasan K, Balasubramanian V, et al. Identifying combination of friction stir welding parameters to maximize strength of lap joints of AA2014-T6 aluminium alloy. Aust J Mech Eng. 2019;17(2):64–75.
   Web of Science ®Google Scholar
• Kalidass S, Gnanasekaran S, R AA, et al. Investigation of shoulder diameter to sheet thickness (D/T) ratio on tensile properties friction stir welded AA2014-T6 aluminum alloy joints. Adv Mater Process Technol. 2021:1–14. DOI:10.1080/2374068X.2021.1970988.
   Google Scholar
• Rajendran C, Srinivasan K, Balasubramanian V, et al. Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy. Trans Nonferrous Met Soc China. 2019;29:1824–1835.
   Web of Science ®Google Scholar
• Kasman S. Optimisation of dissimilar friction stir welding parameter with grey relational analysis. Proc IMech E Part B J Eng Manuf. 2013;227(9):1317–1324.
   Web of Science ®Google Scholar
• Aval HJ. Influences of pin profile on the mechanical and microstructural behaviors in dissimilar friction stir welded AA6082-AA7075 butt joint. Mater Des. 2015;67:413–421.
   Web of Science ®Google Scholar
• Daniolos NM, Pantelis DI. Microstructural and mechanical properties of dissimilar friction stir welds between AA6082-T6 and AA7075-T651. Int J Adv Manuf Technol. 2017;88:2497–2505.
   Web of Science ®Google Scholar
• Periyasamy YK, Perunal AV, Periyasamy BK. Influence of tool shoulder concave angle and pin profile on mechanical properties and microstructural behaviour of friction stir welded AA7075-T651 and AA6061 dissimilar joint. Trans Indian Inst Met. 2019;72:1087–1109.
   Google Scholar
• Ramakrishna MVA, Srinivas K. Grey relational analysis of friction stir welding parameters for the development of dissimilar joints between AA6082 and AA7075. Adv Mater Process Technol. 2021. DOI:10.1080/2374068X.2021.1959112
   PubMedGoogle Scholar
• Batool A, Anjum NA, Khan MY. Impact of pin tool design on the mechanical properties and microstructure of aluminium alloys AA7075-AA6061. J China Ins Eng. 2021;44(7):683–693.
   Web of Science ®Google Scholar
• Lewise KAS, Dhas JER, Pandiyarajan R. Optimising aluminium 2024/7075 friction stir welded joints. Adv Mater Process Technol. 2022. DOI:10.1080/2374068X.2022.2079226
   PubMedGoogle Scholar
• Fernández JB, Roca AS, Fals HC, et al. Application of vibroacoustic signals to evaluate tools profile changes in friction stir welding on AA 1050 H24 alloy. Sci Technol Weld Join. 2012;17:501–510.
   Web of Science ®Google Scholar
• Ulysse P. Three-dimensional modeling of the friction stir-welding process. Int J Mach Tools Manuf. 2002;42:1549–1557.
   Web of Science ®Google Scholar
• Morisada Y, Imaizumi T, Fujii H. Clarification of material flow and defect formation during friction stir welding. Sci Technol Weld Joining. 2015;20(2):130–137.
   Web of Science ®Google Scholar
• Trueba L, Heredia G, Rybicki D, et al. Effect of tool shoulder features on defects and tensile properties of friction stir welded aluminum 6061-T6. J Mater Process Technol. 2015;219:271–277.
   Web of Science ®Google Scholar
• Palanivel R, Mathews PK, Dinaharan I, et al. Mechanical and metallurgical properties of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys. Trans Nonferrous Met Soc China. 2014;24(1):58–65.
   Web of Science ®Google Scholar
• Guo JF, Chen HC, Sun CN, et al. Friction stir welding of dissimilar materials between AA6061 and AA7075 Al alloys effects of process parameters. Mater Des. 2014;56:185–192.
   Web of Science ®Google Scholar
• Rodriguez RI, Jordon JB, Allison PG, et al. Microstructure and mechanical properties of dissimilar friction stir welding of 6061-to-7050 aluminum alloys. Mater Des. 2015;83:60–65.
   Web of Science ®Google Scholar