Electric discharge machining performance measures and optimisation: a review

References

• Nayim SMTI, Hasan MZ, Jamwal A, et al., “Recent trends & developments in optimization and modelling of electro-discharge machining using modern techniques: a review,” in AIP Conference Proceedings, Sep. 2019, vol. 2148. https://aip.scitation.org/doi/abs/10.1063/1.5123973.
   Google Scholar
• Ugrasen G, Ravindra HV, Prakash GVN, et al. Process optimization and estimation of machining performances using artificial neural network in wire EDM. Procedia Mater Sci. 2014;6:1752–1760.
   Google Scholar
• Mohanty CP, Mahapatra SS, Singh MR. An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm. Eng Sci Technol Int J. 2017 Apr;20(2):552–562.
   Google Scholar
• Syed K, Palaniyandi K. Performance of electrical discharge machining using aluminium powder suspended distilled water. Turkish J Eng Environ Sci. 2012;36:195–207.
   Google Scholar
• Ekmekci B, Yaşar H, Ekmekci N. A discharge separation model for powder mixed electrical discharge machining. J Manuf Sci Eng Trans ASME. 2016;138(8). DOI:10.1115/1.4033042
   Web of Science ®Google Scholar
• Kumar S, Singh R, Singh TP, et al. Surface modification by electrical discharge machining: a review. J Mater Process Technol. 2009;209(8):3675–3687.
   Web of Science ®Google Scholar
• Jithin S, Bhandarkar UV, Joshi SS. Analytical simulation of random textures generated in electrical discharge texturing. J Manuf Sci Eng. 2017;139(11). DOI:10.1115/1.4037322
   Web of Science ®Google Scholar
• Mizuno M, Iyama T, Sugawara S, et al. Lapping of electrical discharge machining processed tool steel surface using elliptical tool motion. 2007 [cited 2021 Oct 21].
   Google Scholar
• Sharma D, Bhowmick A, Goyal A. Enhancing EDM performance characteristics of Inconel 625 superalloy using response surface methodology and ANFIS integrated approach. CIRP J Manuf Sci Technol. 2022;37:155–173.
   Web of Science ®Google Scholar
• Younis MA. Effect of electrode material on electrical discharge machining of DIN 1.2379 and DIN 1.2080 surface. J Mater Sci Eng. 2012;1(2):1–4.
   Google Scholar
• Garg RK, Ojha K. A review of tool electrode designs for sinking EDM process. Recent Res Multimedia Syst Signal Process Rob Control Manuf Technol. 2011. p. 25–30.
   Google Scholar
• Shrivastava SM, Sarathe A. Influence of process parameters and electrode shape configuration on material removal rate, surface roughness and electrode wear in die sinking EDM: a review. Int J Emerging Technol Adv Eng. 2014;4(4):138–145.
   Google Scholar
• Dave HK, Kumar S, Rana NC, et al., “Electro discharge machining of AISI 304 using solid and bundled electrodes,” In 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 14); IIT, Guwahati. 2014. p. 14–16.
   Google Scholar
• Khanra AK, Pathak LC, Godkhindi MM. Application of new tool material for electrical discharge machining (EDM). Bull Mater Sci. 2009;32(4):401–405.
   Web of Science ®Google Scholar
• Singh H, Singh E. Effect of pulse on/pulse off on machining of steel using cryogenic treated copper electrode. 2013 [cited 2021 Oct 21].
   Google Scholar
• Prasanna J, Rajamanickam S, Kumar OA, et al. MRR and TWR evaluation on electrical discharge machining of Ti-6al-4V using tungsten: copper composite electrode. IOP Conf Ser Mater Sci Eng. 2017;197(1):012087. IOP Publishing
   Google Scholar
• Sultan T, Kumar A, Gupta RD. Material removal rate, electrode wear rate, and surface roughness evaluation in die sinking EDM with hollow tool through response surface methodology. Int J Manuf Eng. 2014 Sept;2014:1–16.
   Google Scholar
• Khanra AK, Sarkar BR, Bhattacharya B, et al. Performance of ZrB2–cu composite as an EDM electrode. J Mater Process Technol. 2007;183(1):122–126.
   Web of Science ®Google Scholar
• Anandakumar PA, Shanthi P. Experimental investigations into the electrical discharge machining of Monel 400 using different electrodes and dielectric mediums. Int J Mech Eng Rob Res. 2013;2(3):398–403.
   Google Scholar
• Khedkar NK, Singh TP, Jatti VS. Material migration and surface improvement of OHNS die steel material by EDM method using tungsten powder-mixed dielectric. WSEAS Trans Appl Theor Mech. 2014;9(1):161–166.
   Google Scholar
• Jameson EC. Description and development of electrical discharge machining. Electr Discharge Mach. 2001;1–21. https://cnctar.hobbycnc.hu/nyarfa/EDM/szikra.pdf.
   Google Scholar
• Ojha K, Garg RK, Singh KK. MRR improvement in sinking electrical discharge machining: a review. J Miner Mater Charact Eng. 2010;9(08):709.
   Google Scholar
• Lauwers B, Kruth JP, Liu W, et al. Investigation of material removal mechanisms in EDM of composite ceramic materials. J Mater Process Technol. 2004;149(1–3):347–352.
   Web of Science ®Google Scholar
• Nahak B, Gupta A. A review on optimization of machining performances and recent developments in electro discharge machining. Manuf Rev. 2019;6:2.
   Web of Science ®Google Scholar
• Goyal A, Sharma D, Bhowmick A, et al. Multi-objective optimization and characterization of cylindricity and material removal rate in nanographene mixed dielectric EDM using ANFIS and MOSOA. Sādhanā. 2022;47(3):1–21.
   Web of Science ®Google Scholar
• Qudeiri JEA, Mourad AHI, Ziout A, et al. Electric discharge machining of titanium and its alloys: review. Int J Adv Manuf Technol. 2018;96(1–4):1319–1339.
   Web of Science ®Google Scholar
• Makenzi M, Ikua B, “A review of flushing techniques used in electrical discharge machining,” Sustainable Research and Innovation Proceedings, vol. 4, 2012. https://sri.jkuat.ac.ke/jkuatsri/index.php/sri/issue/view/1.
   Google Scholar
• Hourmand M, Sarhan AAD, Sayuti M. Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review. Int J Adv Manuf Technol. 2017;91(1–4):1023–1056.
   Web of Science ®Google Scholar
• Skrabalak G, Kozak J, Zybura M. Optimization of dry EDM milling process. Procedia CIRP. 2013;6:332–337.
   Google Scholar
• Yan BH, Wang CC, Liu WD, et al. Machining characteristics of Al2O3/6061al composite using rotary EDM with a disk-like electrode. Int J Adv Manuf Technol. 2000;16(5):322–333.
   Web of Science ®Google Scholar
• Zhao WS, Meng QG, Wang ZL. The application of research on powder mixed EDM in rough machining. J Mater Process Technol. 2002;129(1–3):30–33.
   Web of Science ®Google Scholar
• Faisal N, Kumar K. Optimization of machine process parameters in EDM for EN 31 using evolutionary optimization techniques. Technologies. 2018;6(2):54.
   Web of Science ®Google Scholar
• Balasubramanian P, Senthilvelan T. Optimization of machining parameters in EDM process using cast and sintered copper electrodes. Procedia Mater Sci. 2014;6:1292–1302.
   Google Scholar
• Pilligrin JC, Asokan P, Jerald J, et al. Effects of electrode materials on performance measures of electrical discharge micro-machining. Mater Manuf Processes. 2017 Apr;33(6):606–615.
   Web of Science ®Google Scholar
• Kumar S, Dhanabalan S. Influence on machinability and form tolerance of Inconel 718 in Edm using different diameter multi hole Cu electrodes. SN Appl Sci. 2019;1(5). DOI:10.1007/s42452-019-0403-x
   Web of Science ®Google Scholar
• Selvarajan L, Manohar M, Dhinakaran P. Modelling and experimental investigation of process parameters in EDM of Si3N4-TiN composites using GRA-RSM. J Mech Sci Technol. 2017;31(1):111–122.
   Web of Science ®Google Scholar
• Alavi F, Jahan MP. Optimization of process parameters in micro-EDM of Ti-6al-4V based on full factorial design. Int J Adv Manuf Technol. 2017; 92(1–4):167–187. DOI:10.1007/s00170-017-0103-x
   Web of Science ®Google Scholar
• Xing Q, Yao Z, Zhang Q. Effects of processing parameters on processing performances of ultrasonic vibration-assisted micro-EDM. Int J Adv Manuf Technol. 2021 Jan;112(1–2):71–86.
   Web of Science ®Google Scholar
• Singh PN, Raghukandan K, Pai BC. Optimization by Grey relational analysis of EDM parameters on machining Al–10%SiCP composites. J Mater Process Technol. 2004 Nov;155-156(1):1658–1661.
   Google Scholar
• Manivannan R, Kumar MP. Multi-attribute decision-making of cryogenically cooled micro-EDM drilling process parameters using TOPSIS method. Mater Manuf Processes. 2017;32(2):209–215.
   Web of Science ®Google Scholar
• Kumar S, Gupta AK, Chandna P, et al. A novel approach of GEF and GA for the optimization of multi-objective wire EDM process during the machining of DC53 super alloy. Proc Inst Mech Eng Part E. 2021;235(4):1119–1131.
   Web of Science ®Google Scholar
• Jahan MP, Saleh T, Rahman M, et al. Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide. J Manuf Sci Eng. 2010;132(5). DOI:10.1115/1.4002457
   Web of Science ®Google Scholar
• Goyal A. Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode. J King Saud Univ - Sci. 2017;29(4):528–535.
   Web of Science ®Google Scholar
• Jung JH, Kwon WT. Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis. J Mech Sci Technol. 2010;24(5):1083–1090.
   Web of Science ®Google Scholar
• Krishnaraj V. Optimization of process parameters in micro-EDM of Ti-6al-4V alloy. J Manuf Sci Prod. 2016;16(1):41–49.
   Google Scholar
• Kumar S, Bansal A, Anand S, et al., “Optimization of EDM parameters for minimum surface roughness during electric discharge machining using two level full factorial design,” academia.edu, Accessed: Oct. 21, 2021.
   Google Scholar
• Mohanty CP, Satpathy MP, Mahapatra SS, et al. Optimization of cryo-treated EDM variables using TOPSIS-based TLBO algorithm. Sādhanā. 2018;43(4):1–18.
   Web of Science ®Google Scholar
• Pandey A, Goyal A, Meghvanshi R. Experimental investigation and optimization of machining parameters of aerospace material using Taguchi’s DOE approach. Mater Today Proc. 2017;4(8):7246–7251.
   Google Scholar
• Goyal A, Rahman HU, Ghani SAC. Experimental investigation & optimisation of wire electrical discharge machining process parameters for Ni49Ti51 shape memory alloy. J King Saud Univ Eng Sci. 2021;33(2):129–135.
   Google Scholar
• Mausam K, Singh PK, Sharma K, et al. Investigation of process parameter of EDM using genetic algorithm (GA) approach for carbon fiber based two phase epoxy composites. Mater Today Proc. 2016;3(10):4102–4108.
   Google Scholar
• Praveen DV, Raju DR, Raju MVJ. Optimization of machining parameters of wire-cut EDM on ceramic particles reinforced Al-metal matrix composites - a review. Mater Today Proc. 2020;23:495–498.
   Google Scholar
• Senthil P, Vinodh S, Singh AK. Parametric optimisation of EDM on Al-Cu/TiB 2 in-situ metal matrix composites using TOPSIS method parametric optimisation of EDM on Al-Cu/TiB 2 in-situ metal matrix. 2014. DOI:10.1504/IJMMM.2014.063922
   Google Scholar
• Subrahmanyam M, Nancharaiah T. Optimization of process parameters in wire-cut EDM of Inconel 625 using Taguchi’s approach. Mater Today Proc. 2020;23:642–646.
   Google Scholar
• Prakash C, Kansal HK, Pabla BS, et al. Multi-objective optimization of powder mixed electric discharge machining parameters for fabrication of biocompatible layer on β-Ti alloy using NSGA-II coupled with Taguchi based response surface methodology. J Mech Sci Technol. 2016;30(9):4195–4204.
   Web of Science ®Google Scholar
• Aliyu AA, Majdi Abdul-Rani A, Lenggo Ginta T, et al. A review of additive mixed-electric discharge machining: current status and future perspectives for surface modification of biomedical implants. Adv Mater Sci Eng. 2017;2017:1–23.
   Web of Science ®Google Scholar
• Raj A, Misra JP, Khanduja D, et al. Design, modeling and parametric optimization of WEDM of Inconel 690 using RSM-GRA approach. Int J Interact Des Manuf (IJIDeM). 2022;1–11. DOI:10.1007/s12008-022-00947-5
   Google Scholar
• Bhatt D, Goyal A. Multi-objective optimization of machining parameters in wire EDM for AISI-304. Mater Today Proc. 2019;18:4227–4242.
   Google Scholar
• Kumar P, Parkash R. Experimental investigation and optimization of EDM process parameters for machining of aluminum boron carbide (Al–b4c) composite. Mach Sci Technol. 2016;20(2):330–348.
   Web of Science ®Google Scholar
• Prakash C, Kansal HK, Pabla BS, et al. Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy. Mater Manuf Processes. 2017;32(3):274–285.
   Web of Science ®Google Scholar
• Thakur SS, Pradhan SK, Sehgal S, et al. Experimental investigations on silicon carbide mixed electric discharge machining. Silicon. 2022;1–19. DOI:10.1007/s12633-022-02022-w
   Web of Science ®Google Scholar
• Sharma D, Hiremath SS. Review on tools and tool wear in EDM. Mach Sci Technol. 2021;25(5):802–873.
   Web of Science ®Google Scholar
• Straka L, Hasova S. Optimization of material removal rate and tool wear rate of Cu electrode in die-sinking EDM of tool steel. Int J Adv Manuf Technol. 2018;97(5–8):2647–2654.
   Web of Science ®Google Scholar
• Goyal A, Pandey A, Sharma P. Investigation of surface roughness for Inconel 625 using wire electric discharge machining. IOP Conf Ser Mater Sci Eng. 2018;377(1):012109.
   Google Scholar
• Lal S, Kumar S, Khan ZA, et al. An investigation on effects of wire electrical discharge machining parameters on surface roughness of newly developed hybrid metal matrix composite. Proc Inst Mech Eng Part B. 2014;228(5):653–662.
   Web of Science ®Google Scholar
• Kumar J, Soota T, Rajput SK. Optimization and measurement of kerf width and surface roughness of AISI 316L. Forces Mech. 6:2022. DOI:10.1016/j.finmec.2022.100071.
   Google Scholar
• Nath AK. Comprehensive materials processing. In: Hashmi S, Batalha GF, Tyne CJV, and Yilbas B, editors. 9.06 - Laser drilling of metallic and nonmetallic substrates. Amsterdam: Elsevier; 2014. pp. 115–175.
   Google Scholar
• Rao RV, Kalyankar VD. Optimization of modern machining processes using advanced optimization techniques: a review. Int J Adv Manuf Technol. 2014;73(5–8):1159–1188.
   Web of Science ®Google Scholar
• Singh V, Pradhan SK. Optimization of EDM process parameters: a review. Int J Emerging Technol Adv Eng. 2014;4(3):345–355.
   Google Scholar
• Biswas S, Singh Y, Mukherjee M. A study on optimization techniques of electro discharge machining. 2021;pp. 1–35. Doi:10.1007/978-3-030-50312-3_1
   Google Scholar
• Goyal A, Gautam N, Kumar Pathak V. An adaptive neuro-fuzzy and NSGA-II-based hybrid approach for modelling and multi-objective optimization of WEDM quality characteristics during machining titanium alloy. Neural Comput Appl. 2021;33(23):16659–16674.
   Web of Science ®Google Scholar
• Reddy VC, Deepthi N, Jayakrishna N. Multiple response optimization of wire EDM on aluminium HE30 by using grey relational analysis. Mater Today Proc. 2015;2(4–5):2548–2554.
   Google Scholar
• Deshmukh SS, Jadhav VS, Shrivastava R. Review on single and multi-objective optimization process parameters of EDM using Taguchi method and grey relational analysis. Mater Today Proc. 2019;18:3856–3866.
   Google Scholar
• Patel BA, Patel D. A review: influence of electrode geometry and process parameters on surface quality and MRR in EDM using Artificial Neural Network. Parameters. 2013;3(1):1645–1654.
   Google Scholar
• Gholetar D, Dave K. A review: evaluating the parametric optimization of electrical discharge machining (EDM) by using & comparing artificial neural network (ANN) and genetic algorithm. 2014;1(1).
   Google Scholar
• Chauhan A, Student P, Bhimani V, et al. A review-optimization of various machine process parameters on the surface roughness in EDM. 2021. Available from: rhimrj.co.in.
   Google Scholar
• Prajapati U, Prajapati J, Modi P, et al. A review of parameter optimization of electro discharge machine by using Taguchi method. Int J Appl Innov Eng Manage. 2014;3(8):20–24.
   Google Scholar
• Verma V, Sajeevan R. Multi process parameter optimization of diesinking EDM on titanium alloy (Ti6al4 V) using Taguchi approach. Mater Today Proc. 2015;2(4–5):2581–2587.
   Google Scholar
• Gangil M, Pradhan MK. Modeling and optimization of electrical discharge machining process using RSM: a review. Mater Today Proc. 2017;4(2):1752–1761.
   Google Scholar
• Alavi F, Jahan MP. Optimization of process parameters in micro-EDM of Ti-6al-4V based on full factorial design. Int J Adv Manuf Technol. 2017;92(1–4):167–187.
   Web of Science ®Google Scholar