Effect of Al-Si coating weights on weldability of hot-stamped ultra-high-strength steel (Usibor^R 1500) used in automotive structures

References

• POSCO Co. LTD. POSCO automotive steel data book. 2008.
   Google Scholar
• Ashiri R, Marashi SPH, Park YD. Weld processing and mechanical responses of 1-GPa TRIP steel resistance spot welds. Weld J. 2018;97:157S–169S.
   Web of Science ®Google Scholar
• Huang MD, Wang BY, Zhou J. Hot stamping parameters optimization of boron steel using a response surface methodology based on central composite design. J Iron and Steel Res Int. 2015;22:519–526.
   Web of Science ®Google Scholar
• Billur E, Altan T. Challenges in forming advanced high strength steels, in Proceedings of New Developments in Sheet Metal Forming Conference, Stuttgart, Germany. 2010. p. 285–304.
   Google Scholar
• Altan T, Groseclose A, Billur E, et al. Advances and challenges in sheet metal forming technology. 7th International Conference on Design and Production of Machines and Dies/Molds, Antalya, Turkey. 2013;1–6.
   Google Scholar
• Neugebauer R, Schieck F, Polster S, et al. Press hardening — an innovative and challenging technology. Arch Civil Mech Eng. 2012;12:113–118.
   Web of Science ®Google Scholar
• Engels H, Schalmin O, Muller-Bollenhagen C. Controlling and monitoring of the hot-stamping process of boron-alloyed heat-treated steels. Proc Int Conf. 2006;135–150.
   Google Scholar
• Billur E, Wang C, Bloor C, et al. Advancements in tailored hot stamping simulations: cooling channel and distortion analyses. 2014. doi:10.1063/1.4850158
   Google Scholar
• Karbasian H, Tekkaya AE. A review on hot stamping. J Mater Process Technol. 2010;210:2103–2118.
   Web of Science ®Google Scholar
• Li Y, Tan N, Xu Z, et al. Enhancement of fatigue endurance by Al-Si coating in hot-stamping boron steel sheet. Metals (Basel). 2019;9:722.
   Web of Science ®Google Scholar
• Billur E. Hot stamping of ultra high-strength steels. 1st ed. Springer Cham; 2019. DOI:10.1007/978-3-319-98870-2.
   Google Scholar
• Allély C, Dosdat L, Clauzeau O, et al. Anticorrosion mechanisms of aluminized steel for hot stamping. Surf Coat Technol. 2014;188–196. DOI:10.1016/j.surfcoat.2013.10.072
   Web of Science ®Google Scholar
• George R, Bardelcik A, Worswick MJ. Hot forming of boron steels using heated and cooled tooling for tailored properties. J Mater Process Technol. 2012;212:2386–2399.
   Web of Science ®Google Scholar
• Hajiannia I, Shamanian M, Atapour M, et al. A microstructure evaluation of different areas of resistance spot welding on ultra-high strength TRIP1100 steel. Cogent Eng. 2018;5:1–13.
   Google Scholar
• Shin HS, De Leon M. Parametric study in similar ultrasonic spot welding of A5052-H32 alloy sheets. J Mater Process Technol. 2015;224:222–232.
   Web of Science ®Google Scholar
• Haddadi F, Abu-Farha F. Microstructural and mechanical performance of aluminium to steel high power ultrasonic spot welding. J Mater Process Technol. 2015;225:262–274.
   Web of Science ®Google Scholar
• Ahsan MRU, Kim YR, Kim CH, et al. Porosity formation mechanisms in cold metal transfer (CMT) gas metal arc welding (GMAW) of zinc coated steels. Sci Tec Weld Joining. 2016;21:209–215.
   Web of Science ®Google Scholar
• Ashiri R, Haque M, Ji C, et al. Supercritical area and critical nugget diameter for liquid metal embrittlement of Zn-coated twining induced plasticity steels. Scr Mater. 2015;109:6–10.
   Web of Science ®Google Scholar
• Russo Spena P, De Maddis M, Lombardi F, et al. Investigation on resistance spot welding of TWIP steel sheets. Steel Res Int. 2015;86:1480–1489.
   Web of Science ®Google Scholar
• Kim YG, Kim JS, Kim IJ. Effect of process parameters on optimum welding condition of DP590 steel by friction stir welding. J Mech Sci Technol. 2014;28:5143–5148.
   Web of Science ®Google Scholar
• Naderi M, Uthaisangsuk V, Prahl U, et al. A numerical and experimental investigation into hot stamping of boron alloyed heat treated steels. Steel Res Int. 2008;79:77–84.
   Web of Science ®Google Scholar
• Turetta A, Bruschi S, Ghiotti A. Investigation of 22mnb5 formability in hot stamping operations. J Mater Process Technol. 2006;177:396–400.
   Web of Science ®Google Scholar
• Merklein M, Lechler J. Investigation of the thermo-mechanical properties of hot stamping steels. J Mater Process Technol. 2006;177:452–455.
   Web of Science ®Google Scholar
• Ikeuchi K, Yanagimoto J. Valuation method for effects of hot stamping process parameters on product properties using hot forming simulator. J Mater Process Technol. 2011;211:1441–1447.
   Web of Science ®Google Scholar
• Ji CW, Jo I, Lee H, et al. Effects of surface coating on weld growth of resistance spot-welded hot-stamped boron steels. J Mech Sci Technol. 2014;28:4761–4769.
   Web of Science ®Google Scholar
• Cha JH. A study on resistance spot weldability of aluminum coated sheet steels, Master’s Thesis. Pukyong National University; 2002.
   Google Scholar
• Jo KR, Cho L, Sulistiyo DH, et al. Effects of Al-Si coating and Zn coating on the hydrogen uptake and embrittlement of ultra-high strength press-hardened steel. Surf Coat Technol. 2019;374:1108–1119.
   Web of Science ®Google Scholar
• Zhang Z, Jia X, Li X. Hot stamping of boron alloy steels using resistance heating International Conference on Civil, Materials and Environmental Sciences (CMES). 2015;2:362–365.
   Google Scholar
• Razmpoosh MH, Macwan A, Biro E. Effect of coating weight on fiber laser welding of Galvanneal-coated 22mnb5 press hardening steel. Elsevier BV. 2018;337:536–543.
   Google Scholar
• Fan DW, De Cooman BC. State-of-the-knowledge on coating systems for hot stamped parts. Steel Res Int. 2012;83:412–433.
   Web of Science ®Google Scholar
• Suehiro M, Kusumi K, Miyakoshi T, et al. Properties of aluminum-coated steels for hot-forming. Nippon Steel Technical Report 2003.
   Google Scholar