References
- Kai CC. Three-dimensional rapid prototyping technologies and key development areas. Comput Control Eng J. 1994;5(4):200–206.
- Krajangsawasdi N, Blok LG, Hamerton I, et al. Fused deposition modeling of fiber reinforced polymer composites: a parametric review. J Compos Sci. 2021;5(1):29.
- Aida HJ, Nadlene R, Mastura MT, et al. Natural fiber filament for fused deposition modelling (FDM): a review. Int J Sustain Eng. 2021;14(6):1988–2008.
- Vyavahare S, Teraiya S, Panghal D, et al. Fused deposition modeling: a review. Rapid Prototyp J. 2020;26(1):176–201. DOI:10.1108/RPJ-04-2019-0106
- Awad A, Gaisford S, Basit AW. Fused deposition modeling: advances in engineering and medicine. In: 3D Printing of Pharmaceuticals. Cham: Springer; 2018. pp. 107–132. DOI:10.1007/978-3-319-90755-0_6
- Finite Element Analysis Software. Autodesk; [cited 2022 May 18]. Available from: https://www.autodesk.com/solutions/finite-element-analysis
- What is FDM (Fused deposition modeling) 3D printing? Hubs; [cited 2022 May 18]. Available from: https://www.hubs.com/knowledge-base/what-is-fdm-3d-printing/
- Hamzah HH, Saleh NH, Patel BA, et al. Recycling chocolate aluminum wrapping foil to create electrochemical modeling electrodes. Molecules. 2020;26(1):21.
- Grimsmo EL, Aalberg A, Langseth M, et al. Failure modes of bolt and nut assemblies under tensile loading. J Constr Steel Res. 2016;126:15–25.
- Sehhat MH, Mahdianikhotbesara A, Yadegari F. Impact of temperature and material variation on mechanical properties of parts fabricated with fused deposition modeling (FDM) additive manufacturing. Int J Adv Manuf Technol. 2022;120(7–8):4791–4801.
- Hassanifard S, Behdinan K. Effects of voids and raster orientations on fatigue life of notched additively manufactured PLA components. Int J Adv Manuf Technol. 2022;120(9–10):6241–6250.
- Andrzejewski J, Markowski M, Barczewski M. The use of nanoscale montmorillonite (MMT) as reinforcement for polylactide acid (PLA) prepared by fused deposition modeling (FDM)—comparative study with biocarbon and talc fillers. Materials. 2022;15:5205.
- Berrio Bernal JD, Silva ECN, Montealegre Rubio W. Characterization of effective Young’s modulus for fused deposition modeling manufactured topology optimization designs. Int J Adv Manuf Technol. 2019;103(5–8):2879–2892.
- Zhu Q, Yu K, Li H, et al. Rapid residual stress prediction and feedback control during fused deposition modeling of PLA. Int J Adv Manuf Technol. 2022;118(9–10):3229–3240. DOI:10.1007/s00170-021-08158-0
- Vahed R, Zareie Rajani HR, Milani AS. Can a black-box ai replace costly DMA testing? —A case study on prediction and optimization of dynamic mechanical properties of 3D printed acrylonitrile butadiene styrene. Materials. 2022;15(8):2855.
- Andrzejewski J, Gronikowski M, Aniśko J. A novel manufacturing concept of LCP fiber-reinforced GPET-Based sandwich structures with an FDM 3D-Printed core. Materials. 2022;15:5405.