Investigating the effects of double-pass TIG welding on the mechanical and microstructural properties of AISI 1008 steel

References

• Abima C, Akinlabi S, Madushele N, et al. Process parameters optimization for GMA welding of AISI 1008 steel joints for optimal tensile strength Revue des composites et des Matériaux Avancés-Journal of composite and advanced materials process parameters optimization for GMA welding of AISI 1008 S. Rev des Compos des Matériaux avancés. 2021;6(December):349–354.
   Google Scholar
• Kumar S, Patnaik L, Shafi SM, et al. Relative effect of wear parameters on the wear behavior of TiAlN coated tool steel and parametric optimization using MCDM method. Adv Mater Process Technol. 2022;8(sup4):1961–1982.
   Google Scholar
• Abima CS, Akinlabi SA, Nkosinathi M, et al., Experimental investigation of TIG-welded AISI 1008 carbon steel. IOP Conf Series. 2021;1107:12036.
   Google Scholar
• Mehdi H, Mishra RS. Investigation of mechanical properties and heat transfer of welded joint of AA6061 and AA7075 using TIG+FSP welding approach. J Adv Join Process. 2019;1(November):100003. 2020.
   Google Scholar
• Mehdi H, Mishra RS, Mishra RS, et al. An experimental analysis and optimization of process parameters of AA6061 and AA7075 welded joint by TIG + FSP welding using RSM parameters of AA6061 and AA7075 welded joint by TIG + FSP. Adv Mater Process Technol. 2020;1:1–23.
   Google Scholar
• Mishra HMRS. Effect of friction stir processing on microstructure and mechanical properties of TIG welded joint of AA6061 and AA7075. Metallogr Microstruct Anal. 2020;9(3):403–418.
   Web of Science ®Google Scholar
• Mehdi H, Mishra RS. Effect of friction stir processing on mechanical properties and heat transfer of TIG welded joint of AA6061 and AA7075. Def Technol. 2021;17(3):715–727.
   Web of Science ®Google Scholar
• Akinlabi ET, Ikumapayi, O. M., Osinubi, A. S., et al. Characterizations of AA5083-H116 produced by friction stir spot welding technique. Adv Mater Process Technol. 2022;8(sup4):2299–2313.
   Google Scholar
• Abima CS, Akinlabi SA, Madushele N, et al. Comparative study between TIG-MIG hybrid, TIG and MIG welding of 1008 steel joints for enhanced structural integrity. Sci African. 2022;17:1–11.
   Google Scholar
• Akinlabi SA, Mashinini MP, Abima CS, et al. TIG & MIG hybrid welded steel joint: a review. Proceedings of the International Conference on Industrial Engineering and Operations Management. Toronto, Canada. 2019 October 23-25. 801–811.
   Google Scholar
• Abima CS, Akinlabi SA, Madushele N, et al. Multi-objective optimization of process parameters in TIG-MIG welded AISI 1008 steel for improved structural integrity. Int J Adv Manuf Technol. 2021. DOI:10.1007/s00170-021-08181-1
   Google Scholar
• Murray RE, Roadman J, Beach R. Fusion joining of thermoplastic composite wind turbine blades: lap-shear bond characterization. Renewable Energy. 2019;140:501–512.
   Web of Science ®Google Scholar
• Abdullah MT, Ajian MLN, Sarah PE. Studies on the effects of multipass welding on mechanical properties of mild steel on SMAW joint. J Mech Eng Res Dev. 2019;42(5):202–204.
   Google Scholar
• Sakthivel T, Vasudevan M, Laha K, et al. Comparison of creep rupture behaviour of type 316L (N) austenitic stainless steel joints welded by TIG and activated TIG welding processes. Mater Sci Eng A. 2011;528(22–23):6971–6980.
   Web of Science ®Google Scholar
• Kumar S, Ghosh PK, Kumar R. Surface modi fi cation of AISI 4340 steel by multi-pass TIG arcing process. J Mater Process Tech. 2017;249(March):394–406.
   Google Scholar
• Ganesh KC, Balasubramanian KR, Vasudevan M, et al. Effect of multipass TIG and activated TIG welding process on the thermo-mechanical behavior of 316LN stainless steel weld joints. Metall Mater Trans B Process Metall Mater Process Sci. 2016;47(2):1347–1362.
   Web of Science ®Google Scholar
• Arun D, Ramkumar KD, Vimala R. Multi-pass arc welding techniques of 12 mm thick super-duplex stainless steel. J Mater Process Tech. 2018;271(December):126–143. 2019. DOI:10.1016/j.jmatprotec.2019.03.031
   Google Scholar
• Osoba LO, Okeniyi JO, Pogoson BI, et al. Effects of single pass and multipass welding on austenitic stainless steel corrosion in aggressive environments. J Sci. 2017;30(4):514–529.
   Google Scholar
• S. T. M. for T. T. of ASTM International, ASTM E8/E8M-16a and P. 2016. Metallic Materials. West Conshohocken, “ASTM International”
   Google Scholar
• ASTM International, ASTM E384-17, standard test method for micro indentation hardness of materials. West Conshohocken, PA. 2017.
   Google Scholar
• Prabakaran MP, Kannan GR. Optimization of laser welding process parameters in dissimilar joint of stainless steel AISI316/AISI1018 low carbon steel to attain the maximum level of mechanical properties through PWHT. Opt Laser Technol. 2019;112:314–322.
   Web of Science ®Google Scholar
• Peng D, Shen J, Tang Q, et al. Effects of aging treatment and heat input on the microstructures and mechanical properties of TIG-welded 6061-T6 alloy joints. Int J Miner Metall Mater. 2013;20(3):259–265.
   Google Scholar
• Sauraw A, Sharma, A. K., Fydrych, D., et al. Study on microstructural characterization, mechanical properties and residual stress of GTAW dissimilar joints of p91 and p22 steels. Materials. 2021;14(21):1–25.
   Web of Science ®Google Scholar
• Lee JH, Park SH, Kwon HS, et al. Laser, tungsten inert gas, and metal active gas welding of DP780 steel: comparison of hardness, tensile properties and fatigue resistance. Mater Des. 2014;64:559–565.
   Web of Science ®Google Scholar
• Sirohi S, Pandey SM, Tiwari V, et al. Impact of laser beam welding on mechanical behaviour of 2.25Cr–1Mo (P22) steel. Int J Press Vessel Pip. 2023;201:1–13.
   Google Scholar
• Trivedi PT, Bhabhor AP. Experimental investigation of process parameters on weld bead geometry for aluminium using GTAW. Int J Sci Res. 2014;3(5):803–809.
   Google Scholar
• Moslemi N, Redzuan N, Ahmad N, et al. Effect of current on characteristic for 316 stainless steel welded joint including microstructure and mechanical properties. Procedia CIRP. 2015;26:560–564.
   Google Scholar
• Wang Q, Sun DL, Na Y, et al. Effects of TIG welding parameters on morphology and mechanical properties of welded joint of Ni-base superalloy. Procedia Eng. 2011;10:37–41.
   Google Scholar
• Abima CS, Akinlabi ET, Akinlabi SA, et al. Microstructural, mechanical and corrosion properties of aluminium MIG welds reinforced with copper powder. Int J Adv Manuf Technol. 2019;105(12):5181–5190.
   Web of Science ®Google Scholar
• Sahasrabudhe OS, Raut DN. Benchmarking of hybrid TIG-MAG arc welding for mild steel. Trans Indian Inst Met. 2019;72(3):801–810.
   Web of Science ®Google Scholar
• Babu SS. The mechanism of acicular ferrite in weld deposits. Curr Opin Solid State Mater Sci. 2004;8:267–278.
   Web of Science ®Google Scholar
• Capdevila C, García-Mateo C, Chao J, et al. Effect of V and N precipitation on acicular ferrite formation in sulfur-lean vanadium steels. Metall Mater Trans A Phys Metall Mater Sci. 2009;40(3):522–538.
   Google Scholar
• Babu SS, Bhadeshia HKDH. Mechanism of the transition from bainite to acicular ferrite. Mater Trans. 1991;32(8):679–688.
   Web of Science ®Google Scholar
• Loder D, Michelic SK, Bernhard C. Acicular ferrite formation and its influencing factors - a review. J Mater Sci Res. 2017;6(1):24–43.
   Google Scholar
• Hu J, Du LX, Zang M, et al. On the determining role of acicular ferrite in V-N microalloyed steel in increasing strength-toughness combination. Mater Charact. 2016;118:446–453.
   Web of Science ®Google Scholar
• Zhao MC, Yang K, Shan YY. Comparison on strength and toughness behaviors of microalloyed pipeline steels with acicular ferrite and ultrafine ferrite. Mater Lett. 2003;57(9–10):1496–1500.
   Web of Science ®Google Scholar
• Chen J, Zong R, Wu C, et al. Influence of low current auxiliary TIG arc on high speed TIG-MIG hybrid welding. J Mater Process Technol. 2017;243:131–142.
   Web of Science ®Google Scholar